Flame Detectors
C7012 Ultraviolet Flame Detector
C7012 senses ultraviolet energy from fuels including natural gas, LPG and oil for Honeywell burner-control systems.
C7012 senses ultraviolet energy from fuels including natural gas, LPG and oil for Honeywell burner-control systems. Continuous-duty approval applies to E/F models with dynamic self-checking. Hazardous-location listings apply to C/F variants, and EN 298 approval depends on pairing the sensor with the specified amplifier or controller.
Features & Benefits
- Viewing Window Pressure Rating
- A/E/G: 20 psi (optional 50 psi window)|C/F: 100 psi rated window
- Ambient Operating Temperature
- A/C/G: 25 to 175 deg F (-4 to 79 deg C)|E/F: -20 to 175 deg F (-29 to 79 deg C)|Low‑temp versions to -40 deg F available
- Parallel Detector Capability
- Up to two detectors can be wired in parallel to prevent nuisance shutdowns
- Hazardous Location Approvals
- C7012C and C7012F: Class I Groups C and D; Class II Groups E, F, G (explosion‑proof)
- Storage Temperature Range
- -60 to 175°F (-51 to 79°C)
- Operating Voltage Range
- C7012A/E: Models for 100, 120, 208, 240 VAC 50/60 Hz|C7012C/F: 120 VAC only; C7012G: 220 V 50 Hz models
- Compatible Amplifiers
- R7247A/B/C, R7289A, R7747C, R7847A/B/C depending on model type (rectification/dynamic self‑check)
- Minimum Flame Signal
- Typically ≥2 µA (or ≥1.25 VDC depending on amplifier) per Table 1 spec
- Mounting Interface
- A/E/G: 3/4 or 1 in NPT mounting flange|C/F: 1 in NPT pipe union
- Detection Method
- Ultraviolet radiation sensing tube (field replaceable) with quartz viewing window
- Connection Type
- A/E: 1/2‑14 NPSM Internal Thread|C/F: 1/2‑14 NPT explosion‑proof (Conduit Entry)
- Housing Type
- A/E/G: NEMA‑4 Cast Aluminum (rain‑tight, dust‑tight, hose‑tight)|C/F: Explosion‑Proof Housing (UL listed)
- Approvals
- UL, CSA, Factory Mutual (FM), DIN, British Gas Corporation, SwissRe depending on model variant
- Leadwire
- A/C: 4 wires|All NEC Class 1, 8 ft long, color‑coded|E/F: 6 wires|G: 5 wires
Applications
- Industrial gas, LPG and oil flame supervision with compatible controls
Overview
- Models
- C7012A, C7012C, C7012E, C7012F, C7012G (includes self‑checking and explosion‑proof variants)
Pressure Specifications
- Viewing Window Pressure Rating
- A/E/G: 20 psi (optional 50 psi window); C/F: 100 psi rated window
Environmental Conditions
- Ambient Operating Temperature
- A/C/G: 25 to 175 deg F (-4 to 79 deg C); E/F: -20 to 175 deg F (-29 to 79 deg C); Low‑temp versions to -40 deg F available
Ignition, Flame & Supervision Specifications
- Parallel Detector Capability
- Up to two detectors can be wired in parallel to prevent nuisance shutdowns
- Minimum Flame Signal
- Typically ≥2 µA (or ≥1.25 VDC depending on amplifier) per Table 1 spec
Standards & Certifications
- Hazardous Location Approvals
- C7012C and C7012F: Class I Groups C and D; Class II Groups E, F, G (explosion‑proof)
- Approvals
- UL, CSA, Factory Mutual (FM), DIN, British Gas Corporation, SwissRe depending on model variant
Storage/Transport Temperatures
- Storage Temperature Range
- -60 to 175°F (-51 to 79°C)
Electrical Specifications
- Operating Voltage Range
- C7012A/E: Models for 100, 120, 208, 240 VAC 50/60 Hz; C7012C/F: 120 VAC only; C7012G: 220 V 50 Hz models
Applications & Compatibility
- Compatible Amplifiers
- R7247A/B/C, R7289A, R7747C, R7847A/B/C depending on model type (rectification/dynamic self‑check)
- Applications
- Burner/boiler flame supervision, flame safeguard systems, multi‑burner installations, flame discrimination in industrial furnaces
Installation & Mounting Specifications
- Mounting Interface
- A/E/G: 3/4 or 1 in NPT mounting flange; C/F: 1 in NPT pipe union
Measurement & Sensing Characteristics
- Detection Method
- Ultraviolet radiation sensing tube (field replaceable) with quartz viewing window
Connections & Interfaces
- Connection Type
- A/E: 1/2‑14 NPSM Internal Thread; C/F: 1/2‑14 NPT explosion‑proof (Conduit Entry)
Product Design & Configuration
- Housing Type
- A/E/G: NEMA‑4 Cast Aluminum (rain‑tight, dust‑tight, hose‑tight); C/F: Explosion‑Proof Housing (UL listed)
Mechanical Design & Hardware Details
- Leadwire
- A/C: 4 wires; All NEC Class 1, 8 ft long, color‑coded; E/F: 6 wires; G: 5 wires
| Parameter | Published value / configuration |
|---|---|
| Models | C7012A, C7012C, C7012E, C7012F, C7012G (includes self‑checking and explosion‑proof variants) |
| Viewing Window Pressure Rating | A/E/G: 20 psi (optional 50 psi window); C/F: 100 psi rated window |
| Ambient Operating Temperature | A/C/G: 25 to 175 deg F (-4 to 79 deg C); E/F: -20 to 175 deg F (-29 to 79 deg C); Low‑temp versions to -40 deg F available |
| Parallel Detector Capability | Up to two detectors can be wired in parallel to prevent nuisance shutdowns |
| Minimum Flame Signal | Typically ≥2 µA (or ≥1.25 VDC depending on amplifier) per Table 1 spec |
| Hazardous Location Approvals | C7012C and C7012F: Class I Groups C and D; Class II Groups E, F, G (explosion‑proof) |
| Approvals | UL, CSA, Factory Mutual (FM), DIN, British Gas Corporation, SwissRe depending on model variant |
| Storage Temperature Range | -60 to 175°F (-51 to 79°C) |
| Operating Voltage Range | C7012A/E: Models for 100, 120, 208, 240 VAC 50/60 Hz; C7012C/F: 120 VAC only; C7012G: 220 V 50 Hz models |
| Compatible Amplifiers | R7247A/B/C, R7289A, R7747C, R7847A/B/C depending on model type (rectification/dynamic self‑check) |
| Applications | Burner/boiler flame supervision, flame safeguard systems, multi‑burner installations, flame discrimination in industrial furnaces |
| Mounting Interface | A/E/G: 3/4 or 1 in NPT mounting flange; C/F: 1 in NPT pipe union |
| Detection Method | Ultraviolet radiation sensing tube (field replaceable) with quartz viewing window |
| Connection Type | A/E: 1/2‑14 NPSM Internal Thread; C/F: 1/2‑14 NPT explosion‑proof (Conduit Entry) |
| Housing Type | A/E/G: NEMA‑4 Cast Aluminum (rain‑tight, dust‑tight, hose‑tight); C/F: Explosion‑Proof Housing (UL listed) |
| Leadwire | A/C: 4 wires; All NEC Class 1, 8 ft long, color‑coded; E/F: 6 wires; G: 5 wires |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
7 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 114465/U | WINDOW GASKET | Request quotation |
| 191002A/U | CHASSIS ASSY 100V | Request quotation |
| 191050/U | QUARTZ LENCSE C7076D | Request quotation |
| C7012A1186/U | UV DETECTOR 208VAC | Request quotation |
| C7012C1042/U | UV DETECTOR 120VAC - EX | Request quotation |
| C7012E1211/U | UV DETECTOR 100VAC SELF-CHECK | Request quotation |
| C7044A1006/U | UV SENSOR | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Ultraviolet Flame Detector · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
