Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Controllers

Experion® Process, Machinery and Drives (PMD) - FCE Controller

Experion PMD FCE combines process, machinery and drive-control capabilities with fieldbus integration.

Experion PMD FCE combines process, machinery and drive-control capabilities with fieldbus integration. Published arrangements include Profibus or Profinet interfaces and connections for legacy TotalPlant Alcont I/O, supporting migration of an installed system. Heat-pipe cooling avoids fans, while channel diagnostics and alarms are presented consistently through the automation system for operators and maintenance teams.

Features & Benefits

Cooling
Heat pipe
Integration
Fieldbus and TotalPlant Alcont I/O links
  • Supports migration and centralized diagnostics

Applications

  • Pulp and paper
  • Metals
  • Chemicals
  • Pharmaceuticals
  • Food and beverage

Detailed capabilities

Product and configuration

Experion PMD FCE combines process, machinery and drive-control capabilities with fieldbus integration. Published arrangements include Profibus or Profinet interfaces and connections for legacy TotalPlant Alcont I/O, supporting migration of an installed system. Heat-pipe cooling avoids fans, while channel diagnostics and alarms are presented consistently through the automation system for operators and maintenance teams.

  • Cooling: Heat pipe
  • Integration: Fieldbus and TotalPlant Alcont I/O links

Manufacturer reference ↗

Operation and integration

The updated FCE connects plant Ethernet with fieldbus and legacy TotalPlant Alcont I/O extension racks. Heat-pipe cooling avoids fans, while channel status and diagnostics enter the system's common alarm and display mechanisms. The newer PMD narrative describes Profibus or Profinet interfaces and migration toward Experion PKS capabilities.

Manufacturer reference ↗

Application and selection

It provides a modernization route for TPA installations while retaining application and graphics investments through conversion. Updated controllers and Experion features address obsolescence, spare-part uncertainty and lifecycle support. Interface availability must follow the relevant release rather than assuming all FCE generations have identical fieldbus support.

Manufacturer reference ↗

Case studies & further resources

Specifications

Others

Environmental Classification
G2 (Gas, Corrosion); IEC 60721-3-3 Class IE33
Application Memory Space
16 MB
Calendar Clock Accuracy
0.5 s/day
Power Supply Connector
3-Pin Screw-Locked
Fieldbus Changeability
Profibus interfaces removable via front panel
Operating Temperature
+5 to +40°C
System Net Interface
10/100/1000 Mbit/s; 2X RJ45; Ethernet FTE A & B
Redundancy Interface
10/100/1000 Mbit/s; 1X RJ45; Ethernet
Profibus Interfaces
9-Pin D-Connector (Female); EN 50170; Max 2; RS485
Non-Volatile Memory
Compact Flash >1 GB
Operating Voltage
24 V ±10% volt
Controller Models
PD-CFFCE22: With Profibus Interface; PD-CFFCE31: With Profinet Interface
UPLINE Interface
1, 2, 4 Mbit/s; 75 Ω Transmission; BNC Connectors
Indicator Lights
Green (Communication); Yellow (1000 Mbit/s Bus Rate)
Heat Dissipation
< 36 W
Function Display
128 x 64 pixel LCD
Cabinet Capacity
Up to 20 Controllers/Cabinet
Controller Type
FC (Field Controller); FCE (Field Controller Express)
Mounting Shelf
19 in Wide; 2U High; Holds Two Controllers
Reset Options
Cold Boot (>4 sec); Warm Boot (1 to 4 sec)
EMC Standards
EN61000-6-2:2005 (Immunity); EN61000-6-4:2007 (Emissions)
Push Buttons
3 under the display for menu control
Power Switch
Separate Switch beside Connector
I/O Capacity
4999 I/O Channels per FCE-PN Controller
Dimensions
220 x 68 x 220 mm
Standards
EN50170, DP/VO V1, V2, Class 1 and 2 Master
Processor
Intel Celeron 1.06 GHz or Equivalent
IP Rating
IP43
LCD Type
128 x 64 Pixel Graphics LCD; FSTN Technique; LED Backlight
Experion® Process, Machinery and Drives (PMD) - FCE Controller — manufacturer page values
ParameterPublished value / configuration
Environmental ClassificationG2 (Gas, Corrosion); IEC 60721-3-3 Class IE33
Application Memory Space16 MB
Calendar Clock Accuracy0.5 s/day
Power Supply Connector3-Pin Screw-Locked
Fieldbus ChangeabilityProfibus interfaces removable via front panel
Operating Temperature+5 to +40°C
System Net Interface10/100/1000 Mbit/s; 2X RJ45; Ethernet FTE A & B
Redundancy Interface10/100/1000 Mbit/s; 1X RJ45; Ethernet
Profibus Interfaces9-Pin D-Connector (Female); EN 50170; Max 2; RS485
Non-Volatile MemoryCompact Flash >1 GB
Operating Voltage24 V ±10% volt
Controller ModelsPD-CFFCE22: With Profibus Interface; PD-CFFCE31: With Profinet Interface
UPLINE Interface1, 2, 4 Mbit/s; 75 Ω Transmission; BNC Connectors
Indicator LightsGreen (Communication); Yellow (1000 Mbit/s Bus Rate)
Heat Dissipation< 36 W
Function Display128 x 64 pixel LCD
Cabinet CapacityUp to 20 Controllers/Cabinet
Controller TypeFC (Field Controller); FCE (Field Controller Express)
Mounting Shelf19 in Wide; 2U High; Holds Two Controllers
Reset OptionsCold Boot (>4 sec); Warm Boot (1 to 4 sec)
EMC StandardsEN61000-6-2:2005 (Immunity); EN61000-6-4:2007 (Emissions)
Push Buttons3 under the display for menu control
Power SwitchSeparate Switch beside Connector
I/O Capacity4999 I/O Channels per FCE-PN Controller
Dimensions220 x 68 x 220 mm
StandardsEN50170, DP/VO V1, V2, Class 1 and 2 Master
ProcessorIntel Celeron 1.06 GHz or Equivalent
IP RatingIP43
LCD Type128 x 64 Pixel Graphics LCD; FSTN Technique; LED Backlight

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗
Manufacturer sources

https://process.honeywell.com/us/en/products/process-automation/distributed-control-systems-dcs/experion-pks/controllers/experion-process-machinery-and-drives-pmd-fce-controller

Last source check: 2026-11-02

FCE Controller Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry