Portable Gauging
HERMetic UTImeter Rtex for Restricted Operation
UTImeter Rtex measures ullage, temperature and oil-water interface for petroleum cargoes under restricted operating conditions.
UTImeter Rtex measures ullage, temperature and oil-water interface for petroleum cargoes under restricted operating conditions. It connects to a HERMetic vapor-control valve and provides interchangeable adaptors, tape protection and accessible battery replacement. Stored RTD characteristics support replacement of the sensor or tape without recalibrating the measurement system, simplifying routine cargo-monitoring maintenance.
Features & Benefits
- Measurements
- Ullage, temperature and oil-water interface
- Allows sensor or tape changes without recalibration
Applications
- Restricted marine cargo gauging
- Custody transfer
- Free-water detection
Detailed capabilities
Product and configuration
UTImeter Rtex measures ullage, temperature and oil-water interface for petroleum cargoes under restricted operating conditions. It connects to a HERMetic vapor-control valve and provides interchangeable adaptors, tape protection and accessible battery replacement. Stored RTD characteristics support replacement of the sensor or tape without recalibrating the measurement system, simplifying routine cargo-monitoring maintenance.
- Measurements: Ullage, temperature and oil-water interface
Operation and integration
Rtex attaches to a compatible tank vapor-control valve for the source's restricted operating method. It combines ullage and interface detection with continuous RTD temperature readings; factory-stored sensor characteristics mean a tape or sensor change does not require system recalibration. Interchangeable valve adaptors, accessible batteries and tape-cleaning/protection parts support ongoing portable measurement.
Application and selection
The purpose is petroleum-cargo verification, custody measurement and free-water detection under restricted conditions. The manufacturer's historical IMO, ISO, API and approval references describe the documented equipment, not a blanket authorization for closed operation. This restricted instrument must remain distinct from the gas-tight Gtex family when selecting the allowed shipboard method.
Software & Interface
- Display
- LCD, 8 Characters, Backlit
Standards & Certifications
- Hazardous Location Approvals
- ATEX II 1 G Ex ia IIB T4/FM Class I, Div 1, C&D, T4 Class I, Zone 0, AEx ia IIB T4/IECEx Zone 0 Ex ia IIB T4
- Approvals
- API MPMS Chap 3.1A, ISO 4512, API MPMS Chap 7, ISO 4268, IP PMM Part IV, IMO, SOLAS, MARPOL, OCIMF Standards
Processing & Performance Metrics
- Ullage/Interface Accuracy
- ±2 mm (±0.08 in)
- Temperature Accuracy
- ±0.1 deg C (0 to 70 deg C), ±0.2 deg F (32 to 158 deg F)
- Temperature Units
- deg C or deg F selectable
- Tape Accuracy
- ±1.5 mm/30 m (±1/16 in/100 ft)
Technical Specifications
- Temperature Resolution
- 0.01 or 0.1 deg selectable
- Tape Resolution
- 1 mm/1/16 in
Environmental Conditions
- Temperature Range
- Sensor: -40 to 90 deg C (-40 to 194 deg F)
Overview
- Special Features
- Modular design, easy tape/sensor replacement, low maintenance, audible/visible indication, suitable for restricted gauging Millimeter-PRD
I/O Capabilities
- Tape Graduation
- Metric/English
- Indication
- Audible and Visible
Applications & Compatibility
- Typical Uses
- Custody Transfer, Inventory Control, Free Water Detection, Calibration/Verification of Automatic Gauging Systems
- Applications
- Portable restricted gauging of ullage, temperature, oil‑water interface of petroleum products on marine vessels and shore tanks
Electrical Specifications
- Power Supply
- Approved 9V Batteries
Network & Connectivity Infrastructure
- Tape Length
- 15, 30, 35 m (50, 100, 115 ft)
Others
- Maximum Tank Overpressure
- 0.3 bar; 4.4 psi
- Ambient Temperature Range
- -20 to 50 deg C; -4 to 122 deg F
| Parameter | Published value / configuration |
|---|---|
| Display | LCD, 8 Characters, Backlit |
| Hazardous Location Approvals | ATEX II 1 G Ex ia IIB T4/FM Class I, Div 1, C&D, T4 Class I, Zone 0, AEx ia IIB T4/IECEx Zone 0 Ex ia IIB T4 |
| Approvals | API MPMS Chap 3.1A, ISO 4512, API MPMS Chap 7, ISO 4268, IP PMM Part IV, IMO, SOLAS, MARPOL, OCIMF Standards |
| Ullage/Interface Accuracy | ±2 mm (±0.08 in) |
| Temperature Accuracy | ±0.1 deg C (0 to 70 deg C), ±0.2 deg F (32 to 158 deg F) |
| Temperature Units | deg C or deg F selectable |
| Tape Accuracy | ±1.5 mm/30 m (±1/16 in/100 ft) |
| Temperature Resolution | 0.01 or 0.1 deg selectable |
| Tape Resolution | 1 mm/1/16 in |
| Temperature Range | Sensor: -40 to 90 deg C (-40 to 194 deg F) |
| Special Features | Modular design, easy tape/sensor replacement, low maintenance, audible/visible indication, suitable for restricted gauging Millimeter-PRD |
| Tape Graduation | Metric/English |
| Indication | Audible and Visible |
| Typical Uses | Custody Transfer, Inventory Control, Free Water Detection, Calibration/Verification of Automatic Gauging Systems |
| Applications | Portable restricted gauging of ullage, temperature, oil‑water interface of petroleum products on marine vessels and shore tanks |
| Power Supply | Approved 9V Batteries |
| Tape Length | 15, 30, 35 m (50, 100, 115 ft) |
| Maximum Tank Overpressure | 0.3 bar; 4.4 psi |
| Ambient Temperature Range | -20 to 50 deg C; -4 to 122 deg F |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
3 parts
| Part Number | Description | Enquiry |
|---|---|---|
| TS 11268 | Frame Rtex | Request quotation |
| TS 20048 | Bottle 0.43 l. | Request quotation |
| TS 20049 | Seat | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HERMetic UTImeter Rtex for Restricted Operation image · Manufacturer ownership retained; republication licence not independently confirmed
HERMetic UTImeter Rtex for Restricted Operation image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
