Small Pressure Regulators (Pressure Reducer)
HON 219 (D 119a)
HON 219, also designated D119a, is a direct-acting gas reducer for industrial and process duties.
HON 219, also designated D119a, is a direct-acting gas reducer for industrial and process duties. It incorporates a relief valve and seals tightly at zero flow. The manufacturer lists several inlet tubing arrangements alongside its threaded connections, allowing the selected unit to match the small-bore installation and required outlet pressure.
Models: HON 219 (D 119a)
Features & Benefits
- Maximum admissible pressure
- 50 bar
- Outlet range
- 8 mbar–8 bar
- Simple operation and bubble-tight zero-flow closure
Applications
- Industrial and process gas pressure reduction
Environmental Conditions
- Operating Ambient Temperature
- -15 to +60 deg C
- Outlet Pressure Range
- Wd: 8 mbar to 8 bar
Technical Specifications
- Maximum Inlet Pressure Rating
- pumax = 50 bar
- Connection Type
- Input - G3/4 (up to p_umax 50 bar), Pipe connections per DIN EN ISO 8434-1 (DIN 2353) for pipe OD 10, 12, 16 mm; Output - G3/4
Processing & Performance Metrics
- Maximum Admissible Pressure
- 50 bar
Standards & Certifications
- Explosion Protection
- All mechanical components without ignition sources/hot faces; not subject to ATEX 95; electronic accessories meet ATEX requirements
Material Specifications
- Body Material
- Aluminum Alloy
Applications & Compatibility
- Applications
- Gas pressure regulator for industrial and process applications; Other gases on request; Suitable for gases per DVGW G 260 and neutral, non-aggressive gases
| Parameter | Published value / configuration |
|---|---|
| Operating Ambient Temperature | -15 to +60 deg C |
| Outlet Pressure Range | Wd: 8 mbar to 8 bar |
| Maximum Inlet Pressure Rating | pumax = 50 bar |
| Connection Type | Input - G3/4 (up to p_umax 50 bar), Pipe connections per DIN EN ISO 8434-1 (DIN 2353) for pipe OD 10, 12, 16 mm; Output - G3/4 |
| Maximum Admissible Pressure | 50 bar |
| Explosion Protection | All mechanical components without ignition sources/hot faces; not subject to ATEX 95; electronic accessories meet ATEX requirements |
| Body Material | Aluminum Alloy |
| Applications | Gas pressure regulator for industrial and process applications; Other gases on request; Suitable for gases per DVGW G 260 and neutral, non-aggressive gases |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON219 | Pressure Reducing Valve HON 219 (D 119) | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 219 (D 119a) Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
