Small Pressure Regulators (Pressure Reducer)
HON 201
HON 201 is a two-stage regulator for gas duties involving large pressure differences.
HON 201 is a two-stage regulator for gas duties involving large pressure differences. Relief functions are provided in the intermediate stage and, within the specified range, the control stage. The device can connect with HON 703 or HON 704 shut-off valves, and the manufacturer offers several tubing and flange transition arrangements.
Models: HON 201
Features & Benefits
- Maximum admissible pressure
- 100 bar
- Outlet range
- 0.02–2 bar
- Stages
- 2
- Designed for accessible operation, monitoring and maintenance
Applications
- Gas pressure reduction with large differentials
Detailed capabilities
HON 201 — operating design
HON 201 is a two-stage regulator for gas duties involving large pressure differences. Relief functions are provided in the intermediate stage and, within the specified range, the control stage. The device can connect with HON 703 or HON 704 shut-off valves, and the manufacturer offers several tubing and flange transition arrangements.
Two-stage reduction and safety combinations
HON 201 handles large pressure differences through intermediate and final control stages. Relief is included at the intermediate stage and at the control stage only within the published lower outlet range. Tubing and flange transition choices support combination with HON 703 or HON 704. Separate inlet, outlet and lock-up specifications describe the selected two-stage assembly.
Published configuration and technical facts
The manufacturer lists these values for HON 201. Version, size and option qualifications remain attached to each fact.
- Permissible Operating Pressure: Up to 100 bar
- Outlet Pressure Range: 0.02 to 2 bar (varies by setpoint spring and stage)
- Temperature Range: -20 to +60 deg C
- Minimum Differential Pressure: Approx. 1 to 1.5 bar
- Maximum Inlet Pressure Rating: 100 bar
- Suitable Gases: Natural Gas, Gases acc. To G260, All Other Non-Corrosive Gases
Environmental Conditions
- Permissible Operating Pressure
- Up to 100 bar
- Outlet Pressure Range
- 0.02 to 2 bar (varies by setpoint spring and stage)
- Temperature Range
- -20 to +60 deg C
Technical Specifications
- Minimum Differential Pressure
- Approx. 1 to 1.5 bar
- Maximum Inlet Pressure Rating
- 100 bar
- Connection Type
- Flanged (PN 40, ANSI 300/600) DN 25, DN 40, DN 50; Screw connection (DIN 2353) for pipe diameters 12, 16, 18, 22, 25, 28, 38, 42 mm
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
- Approvals
- CE Mark with PED
Software & Interface
- Suitable Gases
- Natural Gas, Gases acc. To G260, All Other Non-Corrosive Gases
Material Specifications
- Body Material
- Aluminum Alloy
Applications & Compatibility
- Applications
- Gas pressure regulator for industrial stations; Small flowrate regulating lines in gas pressure regulating stations
| Parameter | Published value / configuration |
|---|---|
| Permissible Operating Pressure | Up to 100 bar |
| Outlet Pressure Range | 0.02 to 2 bar (varies by setpoint spring and stage) |
| Temperature Range | -20 to +60 deg C |
| Minimum Differential Pressure | Approx. 1 to 1.5 bar |
| Maximum Inlet Pressure Rating | 100 bar |
| Connection Type | Flanged (PN 40, ANSI 300/600) DN 25, DN 40, DN 50; Screw connection (DIN 2353) for pipe diameters 12, 16, 18, 22, 25, 28, 38, 42 mm |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Approvals | CE Mark with PED |
| Suitable Gases | Natural Gas, Gases acc. To G260, All Other Non-Corrosive Gases |
| Body Material | Aluminum Alloy |
| Applications | Gas pressure regulator for industrial stations; Small flowrate regulating lines in gas pressure regulating stations |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON201 | Gas Pressure Regulator HON 201 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 201 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
