Small Pressure Regulators (Pressure Reducer)
HON 200
HON 200 is a pilot-operated regulator for offtake stations, industrial supplies and low-load station lines.
HON 200 is a pilot-operated regulator for offtake stations, industrial supplies and low-load station lines. It offers fail-close behavior and multiple control arrangements, including outlet, inlet and differential pressure. Different seat diameters and optional outdoor construction allow the assembly to match its intended duty, with electric supervisory control also identified.
Models: HON 200
Features & Benefits
- Maximum admissible pressure
- 100 bar, flange dependent
- Outlet range
- 0.02–90 bar
- Failure behavior
- Fail close
- Supports large turndown ratios
Applications
- Gas transmission offtakes, industrial facilities and low-load lines
Detailed capabilities
HON 200 — operating design
HON 200 is a pilot-operated regulator for offtake stations, industrial supplies and low-load station lines. It offers fail-close behavior and multiple control arrangements, including outlet, inlet and differential pressure. Different seat diameters and optional outdoor construction allow the assembly to match its intended duty, with electric supervisory control also identified.
Control functions and low-load deployment
HON 200 suits offtake stations, industrial installations and smaller branches of larger regulating systems. Different seat sizes support turndown requirements. The source lists outlet/inlet control, outlet/differential control and overlaid electrical loops, with fail-close behavior and an outdoor option. Connection choice determines part of the pressure qualification, and a complete assembly can be combined with the appropriate shut-off.
Published configuration and technical facts
The manufacturer lists these values for HON 200. Version, size and option qualifications remain attached to each fact.
- Temperature Range: -20 to +60 deg C
- Permissible Inlet Pressure Rating: Up to 100 bar
- Outlet Pressure Range: 0.01 to 90 bar (varies by pilot and spring selection)
- Minimum Differential Pressure: Approx. 1 to 1.5 bar
Applications & Compatibility
- Applications
- Gas pressure regulator for gas supply to municipal, industrial, and individual consumers; Low-load rails in large stations
Environmental Conditions
- Temperature Range
- -20 to +60 deg C
- Permissible Inlet Pressure Rating
- Up to 100 bar
- Outlet Pressure Range
- 0.01 to 90 bar (varies by pilot and spring selection)
Software & Interface
- Suitable Gases
- Natural gas and all non-aggressive gases (special versions for oxygen, open-air, etc. on request)
Technical Specifications
- Minimum Differential Pressure
- Approx. 1 to 1.5 bar
- Connection Type
- DIN Flange (PN 40, ANSI 300/600) DN 25, DN 40, DN 50; Pipe Connections (DIN 2353) for pipe diameters 18 mm, 22 mm, 25 mm, 28 mm, 38 mm, 42 mm
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
- Approvals
- CE Mark with PED
Material Specifications
- Body Material
- Aluminum Alloy
| Parameter | Published value / configuration |
|---|---|
| Applications | Gas pressure regulator for gas supply to municipal, industrial, and individual consumers; Low-load rails in large stations |
| Temperature Range | -20 to +60 deg C |
| Permissible Inlet Pressure Rating | Up to 100 bar |
| Outlet Pressure Range | 0.01 to 90 bar (varies by pilot and spring selection) |
| Suitable Gases | Natural gas and all non-aggressive gases (special versions for oxygen, open-air, etc. on request) |
| Minimum Differential Pressure | Approx. 1 to 1.5 bar |
| Connection Type | DIN Flange (PN 40, ANSI 300/600) DN 25, DN 40, DN 50; Pipe Connections (DIN 2353) for pipe diameters 18 mm, 22 mm, 25 mm, 28 mm, 38 mm, 42 mm |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Approvals | CE Mark with PED |
| Body Material | Aluminum Alloy |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
6 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON200 | Gas pressure regulator HON 200 | Request quotation |
| HON235 | SERIES 235 NEEDLE VALVE | Request quotation |
| HON284 | SERIES 284 REGULATOR | Request quotation |
| HON284-309LP | SERIES 284-309LP REGULATOR WITH SCOV | Request quotation |
| HON284-309MP1 | SERIES 284-309MP1 REGULATOR WITH SCOV | Request quotation |
| HON284-309MP2 | SERIES 284-309MP2 REGULATOR WITH SCOV | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 200 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
