Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Pilot for Gas Pressure Regulators

HON 638-EP

HON 638-EP combines electronic regulation with pneumatic pressure-limit stages.

HON 638-EP combines electronic regulation with pneumatic pressure-limit stages. Electronic control operates between selected limits, while pneumatic stages take over automatically as outlet pressure approaches those bounds. The published operating modes include remotely adjusted setpoints, flow regulation and scheduled pressure curves, supporting integration into wider process-control systems and network operation.

Models: HON 638-EP

Features & Benefits

Control
Electronic regulation with pneumatic limiting
Transition
Automatic between electronic and pneumatic operation
  • Supports changing operating setpoints within pressure limits

Applications

  • Gas flow control, network storage and meter flow limitation

Detailed capabilities

HON 638-EP — operating design

HON 638-EP combines electronic regulation with pneumatic pressure-limit stages. Electronic control operates between selected limits, while pneumatic stages take over automatically as outlet pressure approaches those bounds. The published operating modes include remotely adjusted setpoints, flow regulation and scheduled pressure curves, supporting integration into wider process-control systems and network operation.

Manufacturer reference ↗

Four-stage electro-pneumatic architecture

HON 638-EP places automatic load limiting, lower outlet limiting, upper outlet limiting and an electric-to-pneumatic loading stage on one base plate. Electronic control works between the limits; pneumatic stages assume control near a boundary and return automatically. Published modes include scheduled pressures, remote setpoints, flow limiting, network storage and PI/PID control integration.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 638-EP. Version, size and option qualifications remain attached to each fact.

  • Maximum Admissible Pressure: 100 bar
  • Inlet Pressure Range: 100 bar
  • Auxiliary Energy: 24 VDC, max. 1.5 A (for HON 110a modulator)
  • Output Signal: Pulse Signal 24 Vss, Short Circuit Proof, For actuation of proportional solenoid
  • Input Signal: Standard Electric Signal: 0/4 to 20 mA or 0 to 10 V

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Maximum Admissible Pressure
100 bar

Environmental Conditions

Inlet Pressure Range
100 bar
Auxiliary Energy
24 VDC, max. 1.5 A (for HON 110a modulator)

Standards & Certifications

Explosion Protection
All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
Approvals
CE Mark with PED

Electrical Specifications

Output Signal
Pulse Signal 24 Vss, Short Circuit Proof, For actuation of proportional solenoid
Input Signal
Standard Electric Signal: 0/4 to 20 mA or 0 to 10 V

Applications & Compatibility

Applications
Electro-pneumatic pilot for gas pressure regulators; Enables remote controllable pressure and flow rate control; Integrates pneumatic control with electronic automation systems
HON 638-EP — manufacturer page values
ParameterPublished value / configuration
Maximum Admissible Pressure100 bar
Inlet Pressure Range100 bar
Auxiliary Energy24 VDC, max. 1.5 A (for HON 110a modulator)
Explosion ProtectionAll mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
ApprovalsCE Mark with PED
Output SignalPulse Signal 24 Vss, Short Circuit Proof, For actuation of proportional solenoid
Input SignalStandard Electric Signal: 0/4 to 20 mA or 0 to 10 V
ApplicationsElectro-pneumatic pilot for gas pressure regulators; Enables remote controllable pressure and flow rate control; Integrates pneumatic control with electronic automation systems

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON638Pilot HON 638Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/pilot-for-gas-pressure-regulators/hon-638-ep

Last source check: 2026-11-02

HON 638-EP Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry