Pilot for Gas Pressure Regulators
HON 630
HON 630 pilots compatible throttling-diaphragm gas regulators for outlet-pressure control.
HON 630 pilots compatible throttling-diaphragm gas regulators for outlet-pressure control. Its usual two-stage arrangement is also offered as a single-stage version, with pressure gauges and an upstream HON 905 filter. Optional outlet gauging, venting and electric remote setpoint adjustment adapt the pilot to the needs of the regulating station.
Models: HON 630
Features & Benefits
- Maximum admissible pressure
- 100 bar
- Outlet range
- 0.3–90 bar
- Compatibility
- HON 402, HON 502, HON 503 and HON 505
- Accurate control across wide inlet variations
Applications
- Gas outlet-pressure regulation
Detailed capabilities
HON 630 — operating design
HON 630 pilots compatible throttling-diaphragm gas regulators for outlet-pressure control. Its usual two-stage arrangement is also offered as a single-stage version, with pressure gauges and an upstream HON 905 filter. Optional outlet gauging, venting and electric remote setpoint adjustment adapt the pilot to the needs of the regulating station.
Gauging and control stages
HON 630 normally uses two control stages but offers a single-stage arrangement. Inlet and loading gauges and an upstream HON 905 filter are included in the described assembly, with outlet gauging optional. Electric setpoint adjustment and HON 915 venting are additional choices. The pilot’s role and conformity discussion are tied to its compatible regulator assembly.
Published configuration and technical facts
The manufacturer lists these values for HON 630. Version, size and option qualifications remain attached to each fact.
- Maximum Admissible Pressure: 100 bar
- Lock-up Pressure Zone Class: SZ 2.5
- Outlet Pressure Range: Wd: 0.3 to 90 bar
- Inlet Pressure Range: 100 bar
- Temperature Range: -20 to +60 deg C (Class 2)
- Approvals: CE Mark with PED, DIN-DVGW Registration, Function and Strength per EN 334
- Connection Type: Pipe Connections (DIN EN ISO 8434-1/DIN 2353): Measuring Line, Discharge Line, Vent Line, Inlet Pressure, Loading Pressure (various sizes)
Processing & Performance Metrics
- Maximum Admissible Pressure
- 100 bar
- Accuracy Class (AC)
- AC 20 (0.15 to 1 bar), AC 10 (>1 to 3 bar), AC 5 (>3 to 5 bar), AC 2.5 (>5 to 90 bar)
Mechanical & Physical Properties
- Lock-up Pressure Zone Class
- SZ 2.5
Environmental Conditions
- Outlet Pressure Range
- Wd: 0.3 to 90 bar
- Inlet Pressure Range
- 100 bar
- Temperature Range
- -20 to +60 deg C (Class 2)
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
- Approvals
- CE Mark with PED, DIN-DVGW Registration, Function and Strength per EN 334
Technical Specifications
- Connection Type
- Pipe Connections (DIN EN ISO 8434-1/DIN 2353): Measuring Line, Discharge Line, Vent Line, Inlet Pressure, Loading Pressure (various sizes)
Material Specifications
- Body Material
- Aluminum Alloy
Applications & Compatibility
- Applications
- Pilot for gas pressure regulators HON 402, HON 502, HON 503, HON 5020; Suitable for natural gas and all non-corrosive gaseous media
| Parameter | Published value / configuration |
|---|---|
| Maximum Admissible Pressure | 100 bar |
| Accuracy Class (AC) | AC 20 (0.15 to 1 bar), AC 10 (>1 to 3 bar), AC 5 (>3 to 5 bar), AC 2.5 (>5 to 90 bar) |
| Lock-up Pressure Zone Class | SZ 2.5 |
| Outlet Pressure Range | Wd: 0.3 to 90 bar |
| Inlet Pressure Range | 100 bar |
| Temperature Range | -20 to +60 deg C (Class 2) |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Approvals | CE Mark with PED, DIN-DVGW Registration, Function and Strength per EN 334 |
| Connection Type | Pipe Connections (DIN EN ISO 8434-1/DIN 2353): Measuring Line, Discharge Line, Vent Line, Inlet Pressure, Loading Pressure (various sizes) |
| Body Material | Aluminum Alloy |
| Applications | Pilot for gas pressure regulators HON 402, HON 502, HON 503, HON 5020; Suitable for natural gas and all non-corrosive gaseous media |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
3 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON630 | Pilot HON 630 | Request quotation |
| HON640A | HON 640a SINGLE STAGE PILOT | Request quotation |
| HON642A | HON 642A SINGLE STAGE PILOT | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 630 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
