Medium Pressure Regulators PN16 (ANSI 150)
HON Elster J125
HON Elster J125 provides pressure control for industrial reduction, metering stations and district distribution.
HON Elster J125 provides pressure control for industrial reduction, metering stations and district distribution. Screwed and flanged connection choices depend on size, and full or limited relief options are available. The optional Universal Safety Shut-off Assembly adds overpressure and/or underpressure protection, with individual versions addressing the manufacturer's identified gas and approval requirements.
Models: HON Elster J125
Features & Benefits
- Inlet range
- 70 mbar–8.6 bar
- Protection option
- Universal Safety Shut-off Assembly
- Connection and protection options support different service installations
Applications
- Industrial pressure reduction, metering stations and district distribution
Detailed capabilities
HON Elster J125 — operating design
HON Elster J125 provides pressure control for industrial reduction, metering stations and district distribution. Screwed and flanged connection choices depend on size, and full or limited relief options are available. The optional Universal Safety Shut-off Assembly adds overpressure and/or underpressure protection, with individual versions addressing the manufacturer's identified gas and approval requirements.
Connections, relief and universal shut-off
The J125 offers screwed connections in smaller sizes and screwed or flanged choices at two inches. Full or limited relief can be specified. Its optional USSA supplies overpressure, underpressure or combined protection with resistance to nuisance trips. The manufacturer lists several jurisdictional specifications by version, so these references should be retained as version qualifications rather than a common approval for every unit.
Published configuration and technical facts
The manufacturer lists these values for HON Elster J125. Version, size and option qualifications remain attached to each fact.
- Approvals: PED (CE), BGC/PS/E26, IGE/TD/10, Danish DGP, BS3016, BS EN 14382, GIS/V9-1, Category IV Equipment
- UPSS Range: 8 to 150 mbar (3 to 60 in wg)
- Temperature Range: -20 to +70 deg C
- Outlet Pressure Range: Up to 140 mbar (64 in wg)
- OPSS Range: 18 to 500 mbar (7.5 in wg to 7 PSIG)
- Inlet Pressure Range: 70 mbar to 8.6 bar (1 to 125 psig)
- Connection Type: Threaded to BS EN 10226 (ISO 7) or NPT (others on request)
Standards & Certifications
- Approvals
- PED (CE), BGC/PS/E26, IGE/TD/10, Danish DGP, BS3016, BS EN 14382, GIS/V9-1, Category IV Equipment
Pressure/Operating Limits
- UPSS Range
- 8 to 150 mbar (3 to 60 in wg)
Environmental Conditions
- Temperature Range
- -20 to +70 deg C
- Outlet Pressure Range
- Up to 140 mbar (64 in wg)
- OPSS Range
- 18 to 500 mbar (7.5 in wg to 7 PSIG)
- Inlet Pressure Range
- 70 mbar to 8.6 bar (1 to 125 psig)
Applications & Compatibility
- Gas Type
- Natural, Liquid Petroleum, Manufactured Gases
Technical Specifications
- Connection Type
- Threaded to BS EN 10226 (ISO 7) or NPT (others on request)
Material Specifications
- Body Material
- S.G Iron
| Parameter | Published value / configuration |
|---|---|
| Approvals | PED (CE), BGC/PS/E26, IGE/TD/10, Danish DGP, BS3016, BS EN 14382, GIS/V9-1, Category IV Equipment |
| UPSS Range | 8 to 150 mbar (3 to 60 in wg) |
| Temperature Range | -20 to +70 deg C |
| Outlet Pressure Range | Up to 140 mbar (64 in wg) |
| OPSS Range | 18 to 500 mbar (7.5 in wg to 7 PSIG) |
| Inlet Pressure Range | 70 mbar to 8.6 bar (1 to 125 psig) |
| Gas Type | Natural, Liquid Petroleum, Manufactured Gases |
| Connection Type | Threaded to BS EN 10226 (ISO 7) or NPT (others on request) |
| Body Material | S.G Iron |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
4 parts
| Part Number | Description | Enquiry |
|---|---|---|
| I544127 | SEALING PLUG (TOP CAP) | Request quotation |
| I71424P022 | Spring Dm41,8 d5,3 brown/green Lo190 | Request quotation |
| J12506-278Z01 | Blanking plate J125 MKII | Request quotation |
| J12509-122 | VALVE SEAT DISC,VITON, | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON Elster J125 Image · Manufacturer ownership retained; republication licence not independently confirmed
HON Elster J125 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
