Medium Pressure Regulators PN16 (ANSI 150)
HON 277
HON 277 Hi-Flo regulates gas supply at offtake stations and commercial or industrial facilities.
HON 277 Hi-Flo regulates gas supply at offtake stations and commercial or industrial facilities. It responds rapidly to changing load and permits any mounting position, with the diaphragm housing adjustable relative to the body. Versions add overpressure or combined underpressure and overpressure cut-off protection, with internal-relief and non-relief variants listed separately.
Models: HON 277
Features & Benefits
- Maximum inlet pressure
- 10 bar
- Outlet range
- 0.01–0.5 bar
- Versions
- P without internal relief, R with internal relief
- Flexible orientation assists installation
Applications
- Gas distribution, industrial and commercial gas supply
Detailed capabilities
HON 277 — operating design
HON 277 Hi-Flo regulates gas supply at offtake stations and commercial or industrial facilities. It responds rapidly to changing load and permits any mounting position, with the diaphragm housing adjustable relative to the body. Versions add overpressure or combined underpressure and overpressure cut-off protection, with internal-relief and non-relief variants listed separately.
Installation and relief choices
HON 277 permits any orientation and a diaphragm casing that rotates in forty-five-degree steps. Pressure cut-off options add overpressure or combined low/high protection. P is the non-relief version and R includes internal relief. The published gas families, temperature limits and shut-off settings accompany that selection rather than describing every configuration as identical.
Published configuration and technical facts
The manufacturer lists these values for HON 277. Version, size and option qualifications remain attached to each fact.
- Maximum Inlet Pressure Rating: Up to 10 bar
- Connection Type: Flange DN 50
- Outlet Pressure Range: 0.01 to 0.5 bar
- Temperature Range: -20 to +60 deg C
- SSV Setting Range: Wdso: 0.35 to 0.6 bar, Wdsu: 0.01 to 0.03 bar
Technical Specifications
- Maximum Inlet Pressure Rating
- Up to 10 bar
- Connection Type
- Flange DN 50
Environmental Conditions
- Outlet Pressure Range
- 0.01 to 0.5 bar
- Temperature Range
- -20 to +60 deg C
- SSV Setting Range
- Wdso: 0.35 to 0.6 bar, Wdsu: 0.01 to 0.03 bar
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
- Approvals
- CE Mark with PED
Applications & Compatibility
- Applications
- Suitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry
| Parameter | Published value / configuration |
|---|---|
| Maximum Inlet Pressure Rating | Up to 10 bar |
| Connection Type | Flange DN 50 |
| Outlet Pressure Range | 0.01 to 0.5 bar |
| Temperature Range | -20 to +60 deg C |
| SSV Setting Range | Wdso: 0.35 to 0.6 bar, Wdsu: 0.01 to 0.03 bar |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Approvals | CE Mark with PED |
| Applications | Suitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
8 parts
| Part Number | Description | Enquiry |
|---|---|---|
| BD277BP | SERIES 277P REGULATOR NO INTERNAL RELIEF | Request quotation |
| BD277BR | SERIES 277R REG WITH INTERNAL RELIEF | Request quotation |
| BD277HP | SERIES 277H-P REG NO INTERNAL RELIEF | Request quotation |
| BD277HR | SERIES 277H-R REG WITH INTERNAL RELIEF | Request quotation |
| HON277BP | SERIES 277P REGULATOR NO INTERNAL RELIEF | Request quotation |
| HON277BR | SERIES 277R REG WITH INTERNAL RELIEF | Request quotation |
| HON277HP | SERIES 277H-P REG NO INTERNAL RELIEF | Request quotation |
| HON277HR | SERIES 277H-R REG WITH INTERNAL RELIEF | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 277 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
