Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Medium Pressure Regulators PN16 (ANSI 150)

HON 270 MK2

HON 270 MK2 is a direct-acting gas regulator designed to respond quickly to load changes.

HON 270 MK2 is a direct-acting gas regulator designed to respond quickly to load changes. Its diaphragm casing rotates relative to the body, and the regulator can be installed in any position. A removable cartridge simplifies servicing, while options add overpressure or combined underpressure and overpressure shut-off protection.

Models: HON 270 MK2

Features & Benefits

Maximum inlet pressure
10.3 bar
Outlet range
0.01–0.5 bar
Orientation
Any installation position
  • Cartridge construction simplifies maintenance

Applications

  • Gas distribution offtake stations

Detailed capabilities

HON 270 MK2 — operating design

HON 270 MK2 is a direct-acting gas regulator designed to respond quickly to load changes. Its diaphragm casing rotates relative to the body, and the regulator can be installed in any position. A removable cartridge simplifies servicing, while options add overpressure or combined underpressure and overpressure shut-off protection.

Manufacturer reference ↗

Cartridge servicing and protection variants

The diaphragm assembly rotates in forty-five-degree increments, and the cartridge can be removed to simplify service. Optional overpressure or combined underpressure/overpressure cut-off is available. P versions omit the internal relief valve and R versions include it; those labels must remain distinct when specifying a protection arrangement, along with the chosen screwed or flanged connection.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 270 MK2. Version, size and option qualifications remain attached to each fact.

  • Maximum Incidental Outlet Pressure: 700 mbar g (280 in-wg) (Max. OPCO trip set pressure)
  • Minimum Differential Pressure: Typically 35 mbar (14 in wg)
  • Maximum Inlet Pressure Rating: Up to 10.3 bar g (150psig)
  • Connection Type: 1.5 and 2 in Screwed (BS21 Rc and Rp), DN 50 Flanged (PN16, BS EN 1092-2:1997, ASA Class 150)
  • Lock-up Pressure Zone Class: 5 to 10 mbar (2 to 4 in-wg)
  • Temperature Range: -20 to +60 deg C

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Maximum Incidental Outlet Pressure
700 mbar g (280 in-wg) (Max. OPCO trip set pressure)

Technical Specifications

Minimum Differential Pressure
Typically 35 mbar (14 in wg)
Maximum Inlet Pressure Rating
Up to 10.3 bar g (150psig)
Connection Type
1.5 and 2 in Screwed (BS21 Rc and Rp), DN 50 Flanged (PN16, BS EN 1092-2:1997, ASA Class 150)

Mechanical & Physical Properties

Lock-up Pressure Zone Class
5 to 10 mbar (2 to 4 in-wg)

Environmental Conditions

Outlet Pressure Range
HON 270 MK2: 10 to 350 mbar g (4 to 140 in wg); HON 270H MK2: 320 to 500 mbar (128 to 200 in wg)
Temperature Range
-20 to +60 deg C

Standards & Certifications

Explosion Protection
All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.

Software & Interface

Suitable Gases
Natural and Manufactured Gases (Non-Aggressive), Nitrogen, Carbon Dioxide, Propane, Butane

Material Specifications

Body Material
Ductile Iron

Applications & Compatibility

Applications
Gas pressure reduction for domestic, business, and small industrial feeds to burners, heaters, boilers
HON 270 MK2 — manufacturer page values
ParameterPublished value / configuration
Maximum Incidental Outlet Pressure700 mbar g (280 in-wg) (Max. OPCO trip set pressure)
Minimum Differential PressureTypically 35 mbar (14 in wg)
Maximum Inlet Pressure RatingUp to 10.3 bar g (150psig)
Connection Type1.5 and 2 in Screwed (BS21 Rc and Rp), DN 50 Flanged (PN16, BS EN 1092-2:1997, ASA Class 150)
Lock-up Pressure Zone Class5 to 10 mbar (2 to 4 in-wg)
Outlet Pressure RangeHON 270 MK2: 10 to 350 mbar g (4 to 140 in wg); HON 270H MK2: 320 to 500 mbar (128 to 200 in wg)
Temperature Range-20 to +60 deg C
Explosion ProtectionAll mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
Suitable GasesNatural and Manufactured Gases (Non-Aggressive), Nitrogen, Carbon Dioxide, Propane, Butane
Body MaterialDuctile Iron
ApplicationsGas pressure reduction for domestic, business, and small industrial feeds to burners, heaters, boilers

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

8 parts

Part NumberDescriptionEnquiry
BD270BPSERIES 270P REGULATOR NO INTERNAL RELIEFRequest quotation
BD270BRSERIES 270R REG WITH INTERNAL RELIEFRequest quotation
BD270HPSERIES 270H-P REG NO INTERNAL RELIEFRequest quotation
BD270HRSERIES 270H-R REG WITH INTERNAL RELIEFRequest quotation
HON270BPSERIES 270P REGULATOR NO INTERNAL RELIEFRequest quotation
HON270BRSERIES 270R REG WITH INTERNAL RELIEFRequest quotation
HON270HPSERIES 270H-P REG NO INTERNAL RELIEFRequest quotation
HON270HRSERIES 270H-R REG WITH INTERNAL RELIEFRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/medium-pressure-regulators-pn16-ansi-150/hon-270-mk2

Last source check: 2026-11-02

HON 270 MK2 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry