Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Medium Pressure Regulators PN16 (ANSI 150)

HON 380

HON 380 has a modular regulating assembly that can be removed while its housing remains in the pipeline.

HON 380 has a modular regulating assembly that can be removed while its housing remains in the pipeline. This permits workshop maintenance of the functional components rather than removal of the complete installed body. The manufacturer identifies district pressure-regulating stations and process-gas supply, with use limited to the published gas families or further enquiry.

Models: HON 380

Features & Benefits

Construction
Removable regulating assembly with in-line housing
  • Workshop maintenance of the regulating module

Applications

  • District regulating stations and process-gas supply

Specifications

Applications & Compatibility

Applications
Public Gas Supply Grids, Industrial Systems, District Regulating Stations, Process Gas Supply

Software & Interface

Suitable Gases
Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request

Environmental Conditions

Operating Ambient Temperature
-20 to +60 deg C (Class 2, DIN EN 334)

Electrical Specifications

Nominal Sizes
DN 25, DN 50, DN 80, DN 100

Technical Specifications

Maximum Inlet Pressure Rating
16 bar/20 bar (depending on flange design)
Connection Type
Flanged to EN 1092-2 PN 16 or ANSI 150, Cast Steel Body

Processing & Performance Metrics

Maximum Allowable Pressure (PS)
16 bar/20 bar (differential safe, depending on flange design)

Mechanical & Physical Properties

Lock-up Pressure Zone Class
SZ 2.5

Standards & Certifications

Explosion Protection
Mechanical components not subject to ATEX, electronic accessories comply with ATEX
Approvals
CE Mark with PED

Material Specifications

Body Material
Cast Steel
HON 380 — manufacturer page values
ParameterPublished value / configuration
ApplicationsPublic Gas Supply Grids, Industrial Systems, District Regulating Stations, Process Gas Supply
Suitable GasesGases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request
Operating Ambient Temperature-20 to +60 deg C (Class 2, DIN EN 334)
Nominal SizesDN 25, DN 50, DN 80, DN 100
Maximum Inlet Pressure Rating16 bar/20 bar (depending on flange design)
Connection TypeFlanged to EN 1092-2 PN 16 or ANSI 150, Cast Steel Body
Maximum Allowable Pressure (PS)16 bar/20 bar (differential safe, depending on flange design)
Lock-up Pressure Zone ClassSZ 2.5
Explosion ProtectionMechanical components not subject to ATEX, electronic accessories comply with ATEX
ApprovalsCE Mark with PED
Body MaterialCast Steel

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

2 parts

Part NumberDescriptionEnquiry
HON380GAS PRESSURE REGULATOR HON 380Request quotation
HON380-DADIAPHRAGM ASSEMBLY HON 380Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/medium-pressure-regulators-pn16-ansi-150/hon-380

Last source check: 2026-11-02

HON 380 product image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry