Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Medium Pressure Regulators PN16 (ANSI 150)

HON 372

HON 372 offers gas pressure regulation over a broad inlet range with a compensated diaphragm assembly.

HON 372 offers gas pressure regulation over a broad inlet range with a compensated diaphragm assembly. Optional pilots and an inline-flow safety shut-off extend the available configurations. A replaceable functional cartridge supports servicing, and noise reduction can be specified where required. Pressure settings and pilot choice follow the selected regulator assembly.

Models: HON 372

Features & Benefits

Maximum admissible pressure
20 bar
Outlet range
10 mbar–15 bar
Optional pilots
HON 610, HON 650 or HON 600
  • Exchangeable functional units simplify maintenance

Applications

  • Gas pressure regulation

Detailed capabilities

HON 372 — operating design

HON 372 offers gas pressure regulation over a broad inlet range with a compensated diaphragm assembly. Optional pilots and an inline-flow safety shut-off extend the available configurations. A replaceable functional cartridge supports servicing, and noise reduction can be specified where required. Pressure settings and pilot choice follow the selected regulator assembly.

Manufacturer reference ↗

Pilot choices and pressure supervision

HON 372 can be equipped with the named HON 610, HON 650 or HON 600 pilots. It also offers inline-flow safety shut-off and optional noise reduction. A compensated diaphragm and exchangeable cartridge support accurate, serviceable control, while the minimum differential, lock-up zone and shut-off settings are published separately for selecting a complete regulating assembly.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 372. Version, size and option qualifications remain attached to each fact.

  • Maximum Inlet Pressure Rating: 16 bar/20 bar
  • Connection Type: DIN Flange PN 16, ANSI 150; other Flange on request
  • Pipe Size: DN 25, DN 50, DN 80, DN 100, DN 150
  • Maximum Admissible Pressure: 16 bar (Integral Overpressure Protection), 20 bar (Integral Overpressure Protection)
  • Lock-up Pressure Zone Class: SZ 2.5
  • Outlet Pressure Range: 0.01 to 15 bar
  • Temperature Range: -20 to +60 deg C
  • Set Range: 0.01 to 15 bar
  • Explosion Protection: Mechanical components not subject to ATEX 95, electrical components comply with ATEX
  • Suitable Gases: Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request

Manufacturer reference ↗

Specifications

Technical Specifications

Maximum Inlet Pressure Rating
16 bar/20 bar
Connection Type
DIN Flange PN 16, ANSI 150; other Flange on request
Pipe Size
DN 25, DN 50, DN 80, DN 100, DN 150

Processing & Performance Metrics

Maximum Admissible Pressure
16 bar (Integral Overpressure Protection), 20 bar (Integral Overpressure Protection)

Mechanical & Physical Properties

Lock-up Pressure Zone Class
SZ 2.5

Environmental Conditions

Outlet Pressure Range
0.01 to 15 bar
Temperature Range
-20 to +60 deg C
Set Range
0.01 to 15 bar

Standards & Certifications

Explosion Protection
Mechanical components not subject to ATEX 95, electrical components comply with ATEX
Approvals
CE Mark with PED

Software & Interface

Suitable Gases
Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request

Material Specifications

Body Material
Ductile Iron

Applications & Compatibility

Applications
Pilot-operated regulator for commercial/industrial and local supply stations
HON 372 — manufacturer page values
ParameterPublished value / configuration
Maximum Inlet Pressure Rating16 bar/20 bar
Connection TypeDIN Flange PN 16, ANSI 150; other Flange on request
Pipe SizeDN 25, DN 50, DN 80, DN 100, DN 150
Maximum Admissible Pressure16 bar (Integral Overpressure Protection), 20 bar (Integral Overpressure Protection)
Lock-up Pressure Zone ClassSZ 2.5
Outlet Pressure Range0.01 to 15 bar
Temperature Range-20 to +60 deg C
Set Range0.01 to 15 bar
Explosion ProtectionMechanical components not subject to ATEX 95, electrical components comply with ATEX
ApprovalsCE Mark with PED
Suitable GasesGases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request
Body MaterialDuctile Iron
ApplicationsPilot-operated regulator for commercial/industrial and local supply stations

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON372Gas pressure regulator HON 372Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/medium-pressure-regulators-pn16-ansi-150/hon-372

Last source check: 2026-11-02

HON 372 image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry