Medium Pressure Regulators PN16 (ANSI 150)
HON 370
HON 370 uses an inlet-pressure-compensated diaphragm arrangement for dynamic gas regulation.
HON 370 uses an inlet-pressure-compensated diaphragm arrangement for dynamic gas regulation. It is available with relief or safety-diaphragm options and can incorporate a shut-off valve with inline flow. The functional cartridge is exchangeable for maintenance, while optional noise treatment adapts the regulator to installation requirements without changing its basic control role.
Models: HON 370
Features & Benefits
- Maximum admissible pressure
- 20 bar
- Outlet range
- 20 mbar–4 bar
- Construction
- Exchangeable cartridge
- Simplifies maintenance of dynamic regulating lines
Applications
- Gas furnaces and other dynamic gas pressure duties
Detailed capabilities
HON 370 — operating design
HON 370 uses an inlet-pressure-compensated diaphragm arrangement for dynamic gas regulation. It is available with relief or safety-diaphragm options and can incorporate a shut-off valve with inline flow. The functional cartridge is exchangeable for maintenance, while optional noise treatment adapts the regulator to installation requirements without changing its basic control role.
Regulating assembly and optional protection
The compensated diaphragm supports dynamic gas loads. A relief valve or safety diaphragm can be specified, alongside an optional inline-flow shut-off and noise reduction. The source lists separate relief offsets and high/low shut-off settings rather than one universal trip pressure. Exchanging the regulating cartridge reduces the amount of work required on the installed body.
Published configuration and technical facts
The manufacturer lists these values for HON 370. Version, size and option qualifications remain attached to each fact.
- Maximum Permissible Pressure: Up to 20 bar
- Lock-up Pressure Zone Class: SZ 2.5
- Explosion Protection: Mechanical components not subject to ATEX 95, electronic accessories comply with ATEX
- Temperature Range: -20 to +60 deg C
- Connection Type: DIN Flange PN 16, Class 150 (ANSI 16.5); other Flange on request
- Suitable Gases: Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request
Processing & Performance Metrics
- Maximum Permissible Pressure
- Up to 20 bar
Mechanical & Physical Properties
- Lock-up Pressure Zone Class
- SZ 2.5
Standards & Certifications
- Explosion Protection
- Mechanical components not subject to ATEX 95, electronic accessories comply with ATEX
- Approvals
- CE Mark with PED
Environmental Conditions
- Temperature Range
- -20 to +60 deg C
Technical Specifications
- Connection Type
- DIN Flange PN 16, Class 150 (ANSI 16.5); other Flange on request
Software & Interface
- Suitable Gases
- Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request
Material Specifications
- Body Material
- Ductile Iron
Applications & Compatibility
- Applications
- Commercial/Industrial Gas Pressure Regulation, Local Supply Stations, Dynamic Regulating Lines (Furnaces, Burners, Engines), Component For Gas Consumption Devices (EC Directive 90/396/EEC), Motorized Actuator/Pneumatic Setpoint Options
| Parameter | Published value / configuration |
|---|---|
| Maximum Permissible Pressure | Up to 20 bar |
| Lock-up Pressure Zone Class | SZ 2.5 |
| Explosion Protection | Mechanical components not subject to ATEX 95, electronic accessories comply with ATEX |
| Approvals | CE Mark with PED |
| Temperature Range | -20 to +60 deg C |
| Connection Type | DIN Flange PN 16, Class 150 (ANSI 16.5); other Flange on request |
| Suitable Gases | Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request |
| Body Material | Ductile Iron |
| Applications | Commercial/Industrial Gas Pressure Regulation, Local Supply Stations, Dynamic Regulating Lines (Furnaces, Burners, Engines), Component For Gas Consumption Devices (EC Directive 90/396/EEC), Motorized Actuator/Pneumatic Setpoint Options |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON370 | Gas pressure regulator HON 370 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 370 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
