Medium Pressure Regulators PN16 (ANSI 150)
HON 300
HON 300 regulates gas pressure using an inlet-pressure-compensated diaphragm assembly.
HON 300 regulates gas pressure using an inlet-pressure-compensated diaphragm assembly. It is suited to dynamic duties such as gas furnaces and offers internal or external impulse connection choices. Replaceable functional cartridges simplify service, while optional safety shut-off, relief or safety-diaphragm arrangements depend on the selected regulating assembly and pressure range.
Models: HON 300
Features & Benefits
- Maximum admissible pressure
- 16 bar
- Outlet range
- 20 mbar–2 bar
- Construction
- Replaceable functional cartridge
- Dynamic response supports changing process loads
Applications
- Gas furnaces and pressure regulating lines
Detailed capabilities
HON 300 — operating design
HON 300 regulates gas pressure using an inlet-pressure-compensated diaphragm assembly. It is suited to dynamic duties such as gas furnaces and offers internal or external impulse connection choices. Replaceable functional cartridges simplify service, while optional safety shut-off, relief or safety-diaphragm arrangements depend on the selected regulating assembly and pressure range.
Replaceable regulating and safety assemblies
HON 300 has internal or external impulse choices and a compensated diaphragm for dynamic demand. Its normal assembly may include relief within the specified lower outlet range; alternatives include the HON 915 vent arrangement or a safety diaphragm. A shut-off can be included or omitted, with K1a or K2a control elements identified. Cartridge construction allows functional replacement without dismantling the entire station line.
Published configuration and technical facts
The manufacturer lists these values for HON 300. Version, size and option qualifications remain attached to each fact.
- Maximum Permissible Pressure: 16 bar
- Lock-up Pressure Zone Class: SZ 2.5
- Temperature Range: -20 to +60 deg C
- Connection Type: Class 150 (ANSI 16.5) on request; Flange PN 16
- Pipe Size: DN 25
- Suitable Gases: Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request
Processing & Performance Metrics
- Maximum Permissible Pressure
- 16 bar
Mechanical & Physical Properties
- Lock-up Pressure Zone Class
- SZ 2.5
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
Environmental Conditions
- Temperature Range
- -20 to +60 deg C
Technical Specifications
- Connection Type
- Class 150 (ANSI 16.5) on request; Flange PN 16
- Pipe Size
- DN 25
Software & Interface
- Suitable Gases
- Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request
Material Specifications
- Body Material
- Cast Aluminum Alloy
Applications & Compatibility
- Applications
- Component for gas appliances (EC Directive 90/396/EEC); Direct acting gas pressure regulator for systems per DVGW G 491 (A), G 600 (A) (TRGI); Dynamic regulating lines (gas furnaces, burner switching, gas engine operation)
| Parameter | Published value / configuration |
|---|---|
| Maximum Permissible Pressure | 16 bar |
| Lock-up Pressure Zone Class | SZ 2.5 |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Temperature Range | -20 to +60 deg C |
| Connection Type | Class 150 (ANSI 16.5) on request; Flange PN 16 |
| Pipe Size | DN 25 |
| Suitable Gases | Gases per DVGW worksheet G 260; Neutral, non-aggressive gases; Other gases on request |
| Body Material | Cast Aluminum Alloy |
| Applications | Component for gas appliances (EC Directive 90/396/EEC); Direct acting gas pressure regulator for systems per DVGW G 491 (A), G 600 (A) (TRGI); Dynamic regulating lines (gas furnaces, burner switching, gas engine operation) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
5 parts
| Part Number | Description | Enquiry |
|---|---|---|
| BD305LP | SERIES 305LP SAFETY CUT OFF VALVE | Request quotation |
| BD305MP | SERIES 305MP SAFETY CUT OFF VALVE | Request quotation |
| HON300 | Gas Pressure Regulator HON 300 | Request quotation |
| HON300_DA | Diaphragm Assembly for HON 300 | Request quotation |
| HON_SSV_CARTRIDGE | Safety Shut Off Cartridge | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 300 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
