SmartLine Wireless Transmitters
SmartLine Wireless Universal I/O
SmartLine wireless universal I/O bridges analogue and low-level sensor signals into the control network.
SmartLine wireless universal I/O bridges analogue and low-level sensor signals into the control network. STUW750 provides three mixed inputs, while STUW751 combines two inputs with a discrete output. Measurements pass through wireless nodes to the Wireless Device Manager, which supplies interfaces for integration with Experion PKS and other supported control systems.
Models: STUW750, STUW751
Features & Benefits
- Models
- STUW750 and STUW751
- STUW751 output
- One discrete output
Applications
- Wireless analogue, thermocouple and contact monitoring
- Remote alarm or device switching
Detailed capabilities
STUW750 and STUW751 channel arrangements
STUW750 provides three inputs selected from the stated high-level current, thermocouple, mV or contact types. STUW751 provides two inputs plus one discrete output, permitting an alarm or device command. The output belongs to the 751 arrangement; it must not be added to the three-input 750 specification or treated as an extra channel available on every universal-I/O transmitter.
How Does It Work?
Digital measurements travel through another transmitter, router or access point toward the Wireless Device Manager. The gateway offers the named host interfaces, including OPC, HART and Modbus TCP. The source states ISA100 compliance and digital host integration without the added conversion chain it describes for analog links. This is the SmartLine 750/751 range, separate from the XYR700/701 identifiers.
What Problems Does It Solve?
Combining varied measurements and a version-specific output reduces the installation effort of several single-function instruments. It suits remote or unpowered areas and applications requiring rearrangement. The channel mix and command role must be established before installation rather than assuming simultaneous support for every listed input on each terminal.
Product videos
Overview
- Models
- STUW750, STUW751
Processing & Performance Metrics
- Maximum Lead Wire Resistance
- 50 Ω/leg for all analog input types
- Cold Junction Accuracy
- ±0.5 deg C
- Accuracy
- ±0.1% of range for T/C, mV, HLAI inputs; ±0.30% of range for 2-wire and DI resistance measurement
Environmental Conditions
- Ambient Temperature Range
- -40 to +85 deg C
- Temperature Effect
- ±0.01% Full Scale per deg C for T/C, mV, HLAI; ±0.015% Full Scale per deg C for 2-wire and DI resistance
- Relative Humidity
- 0 to 100% RH (Non-Condensing)
- Shock/Vibration
- Max 40g Shock, 4g Vibration (15-200Hz)
- Signal Range
- Up to 350 m (1150 ft) with 4 dBi antenna (line of sight)
- Stability
- ±0.1% of URL/year
- Battery
- 3.6 V Lithium thionyl chloride (LiSOCl₂), size D (2X)
I/O Capabilities
- Sensor Types Supported
- Thermocouple (Type B, E, J, K, N, R, S, T), Millivolt (mV), High Level Analog Input (mA: 0-20, 4-20), Discrete Input (SPST dry contacts), 2-Wire Resistance
Technical Specifications
- Process Connections
- 1/4 in NPT, 1/2 in NPT with Adapter, meets DIN 19213 requirements
Communication & Protocols
- Wireless Protocol
- ISA100 Wireless (2.4 GHz ISM band, DSSS, IEEE 802.15.4)
Material Specifications
- Housing Material
- Epoxy-Polyester Coated Aluminum or 316 Stainless Steel (CF8M); NEMA 4X, IP66/IP67
Electrical Specifications
- Input Channels
- STUW750: Up to 3 channels for T/C, mV, mA, DI, 2-wire resistance; STUW751: Up to 2 channels for T/C, mV, mA, DI, 2-wire resistance + 1 dedicated digital output channel
- Battery Model
- Xeno XL-205F, Eagle Picher PT-2300H, Tadiran TL-5930/s
- Power Supply
- 3.6 V Lithium thionyl chloride (LiSOCl2), D Size, Non-Rechargeable (24 VDC Option)
- Frequency
- 2.4 GHz ISM band (2400 to 2483.5 MHz)
Mechanical & Physical Properties
- Enclosure
- Type 4X, IP66/IP67
Standards & Certifications
- Approvals
- CSA, FM, ATEX, IECEx
Applications & Compatibility
- Mounting
- Bracket for 2 in (50 mm) pipe (vertical/horizontal) or wall; vertical antenna orientation recommended
| Parameter | Published value / configuration |
|---|---|
| Models | STUW750, STUW751 |
| Maximum Lead Wire Resistance | 50 Ω/leg for all analog input types |
| Cold Junction Accuracy | ±0.5 deg C |
| Accuracy | ±0.1% of range for T/C, mV, HLAI inputs; ±0.30% of range for 2-wire and DI resistance measurement |
| Ambient Temperature Range | -40 to +85 deg C |
| Temperature Effect | ±0.01% Full Scale per deg C for T/C, mV, HLAI; ±0.015% Full Scale per deg C for 2-wire and DI resistance |
| Relative Humidity | 0 to 100% RH (Non-Condensing) |
| Shock/Vibration | Max 40g Shock, 4g Vibration (15-200Hz) |
| Signal Range | Up to 350 m (1150 ft) with 4 dBi antenna (line of sight) |
| Stability | ±0.1% of URL/year |
| Battery | 3.6 V Lithium thionyl chloride (LiSOCl₂), size D (2X) |
| Sensor Types Supported | Thermocouple (Type B, E, J, K, N, R, S, T), Millivolt (mV), High Level Analog Input (mA: 0-20, 4-20), Discrete Input (SPST dry contacts), 2-Wire Resistance |
| Process Connections | 1/4 in NPT, 1/2 in NPT with Adapter, meets DIN 19213 requirements |
| Wireless Protocol | ISA100 Wireless (2.4 GHz ISM band, DSSS, IEEE 802.15.4) |
| Housing Material | Epoxy-Polyester Coated Aluminum or 316 Stainless Steel (CF8M); NEMA 4X, IP66/IP67 |
| Input Channels | STUW750: Up to 3 channels for T/C, mV, mA, DI, 2-wire resistance; STUW751: Up to 2 channels for T/C, mV, mA, DI, 2-wire resistance + 1 dedicated digital output channel |
| Battery Model | Xeno XL-205F, Eagle Picher PT-2300H, Tadiran TL-5930/s |
| Power Supply | 3.6 V Lithium thionyl chloride (LiSOCl2), D Size, Non-Rechargeable (24 VDC Option) |
| Frequency | 2.4 GHz ISM band (2400 to 2483.5 MHz) |
| Enclosure | Type 4X, IP66/IP67 |
| Approvals | CSA, FM, ATEX, IECEx |
| Mounting | Bracket for 2 in (50 mm) pipe (vertical/horizontal) or wall; vertical antenna orientation recommended |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 30757503-507 | KIT ELECTRONICS ENCL SEALS STW Temp | Request quotation |
| 50000547-501 | PLUG KIT DH M20 SS | Request quotation |
| 50000547-502 | PLUG KIT DH M20 CS | Request quotation |
| 50015623-504 | LCD CAP ASSY ALUM, BLUE PURE POLYSTER | Request quotation |
| 50015623-505 | CAP ASMBLY-LCD/ALUMINUM/BLU/POLYHYBRID | Request quotation |
| 50016190-507 | CAP ASMBLY-ALUMINUM/BLUE/PURE POLYESTER | Request quotation |
| 50016190-508 | CAP ASMBLY-ALUMN/BLUE/EPOXYPOLY HYBRID | Request quotation |
| 50016190-509 | CAP ASMBLY NO LABEL, BLUE PURE POLYESTER | Request quotation |
| 50016190-510 | CAP ASMBLY-NO LABEL/ALUMN/BLU/POLYHYBRID | Request quotation |
| 50018278-501 | 1.0M LIG PROT CABLE B-TYP N-N | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Smartline-Wireless-Temp-Transmitter Universal I/O · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
