SmartLine Wireless Transmitters
SmartLine Wireless Temperature
SmartLine wireless temperature transmitters convert sensor and contact inputs into digital measurements carried over an ISA100 wireless network.
SmartLine wireless temperature transmitters convert sensor and contact inputs into digital measurements carried over an ISA100 wireless network. Input combinations include thermocouples, millivolts, resistance and dry contacts, with support for two RTDs. Network nodes relay readings to the gateway, allowing temperature and related status signals to reach the control system from distributed measurement points.
Models: STIW400
Features & Benefits
- Inputs
- Up to four TC/mV/ohm/discrete inputs or two RTDs
- Simplifies access to distributed sensor measurements
Applications
- Wireless temperature and contact-state monitoring
Detailed capabilities
Temperature and contact capacity
The temperature transmitter accepts up to four thermocouple, mV, resistance or discrete inputs, or two RTDs. The related universal-I/O family is identified as an alternative where RTD inputs are unnecessary. These channel counts apply to the SmartLine generation and must not be replaced by the older XYR6000 three-input description elsewhere in the catalogue.
How Does It Work?
The instrument converts its analog or voltage-free contact inputs into digital measurement messages. Another transmitter, a field router or an access point can forward them toward the gateway through a managed redundant wireless network. The page states ISA100 compliance. Contact inputs are explicitly floating and voltage-free, not a general authorization for externally energized digital signals.
What Problems Does It Solve?
The wireless path brings temperature and discrete measurements to process control or SCADA when wiring access or project economics prevented conventional instrumentation. Several input types can share one field device, with secure managed communication reducing the need for a separate cable route. Actual sensor wiring and input combinations still follow the selected transmitter configuration.
Product videos
Overview
- Models
- STIW400
Processing & Performance Metrics
- Maximum Lead Wire Resistance
- 50 Ω/leg for all analog input types
- Cold Junction Accuracy
- ±0.5 deg C
- Accuracy
- ±0.1% (T/Cs, mV), ±0.20% (RTD, resistance, DI)
I/O Capabilities
- Hazardous Location Approvals
- CSA, FM, ATEX, IECEx (Explosion-Proof, Intrinsically Safe, Non-Incendive, Dustproof)
Environmental Conditions
- Ambient Temperature Range
- -40 to +85 deg C
- Temperature Effect
- ±0.01% Full Scale per deg C
- Relative Humidity
- 0 to 100% RH (Non-Condensing)
- Shock/Vibration
- Max 40g Shock, 4g Vibration (15-200Hz)
- Signal Range
- Up to 350 m (1150 ft) with 4 dBi antenna (line of sight)
- Stability
- ±0.1% of URL/year
- Battery
- 3.6 V Lithium thionyl chloride (LiSOCl₂), size D (2X)
Communication & Protocols
- Wireless Protocol
- ISA100 Wireless (2.4 GHz ISM band, DSSS, IEEE 802.15.4)
Material Specifications
- Housing Material
- Epoxy-Polyester Coated Aluminum or 316 Stainless Steel (CF8M); NEMA 4X, IP66/IP67
Electrical Specifications
- Input Channels
- Up to 4 channels for T/C (thermocouple) or mV, Up to 2 channels for RTD or 3-wire resistance, Up to 4 channels for discrete input or 2-wire resistance
- Power Supply
- 3.6 V Lithium thionyl chloride (LiSOCl2), D Size, Non-Rechargeable (24 VDC Option)
- Frequency
- 2.4 GHz ISM band (2400 to 2483.5 MHz)
Mechanical & Physical Properties
- Enclosure
- Type 4X, IP66/IP67
Standards & Certifications
- Approvals
- CSA, FM, ATEX, IECEx
Applications & Compatibility
- Mounting
- Bracket for 2 in (50 mm) pipe (vertical/horizontal) or wall; vertical antenna orientation recommended
| Parameter | Published value / configuration |
|---|---|
| Models | STIW400 |
| Maximum Lead Wire Resistance | 50 Ω/leg for all analog input types |
| Cold Junction Accuracy | ±0.5 deg C |
| Accuracy | ±0.1% (T/Cs, mV), ±0.20% (RTD, resistance, DI) |
| Hazardous Location Approvals | CSA, FM, ATEX, IECEx (Explosion-Proof, Intrinsically Safe, Non-Incendive, Dustproof) |
| Ambient Temperature Range | -40 to +85 deg C |
| Temperature Effect | ±0.01% Full Scale per deg C |
| Relative Humidity | 0 to 100% RH (Non-Condensing) |
| Shock/Vibration | Max 40g Shock, 4g Vibration (15-200Hz) |
| Signal Range | Up to 350 m (1150 ft) with 4 dBi antenna (line of sight) |
| Stability | ±0.1% of URL/year |
| Battery | 3.6 V Lithium thionyl chloride (LiSOCl₂), size D (2X) |
| Wireless Protocol | ISA100 Wireless (2.4 GHz ISM band, DSSS, IEEE 802.15.4) |
| Housing Material | Epoxy-Polyester Coated Aluminum or 316 Stainless Steel (CF8M); NEMA 4X, IP66/IP67 |
| Input Channels | Up to 4 channels for T/C (thermocouple) or mV, Up to 2 channels for RTD or 3-wire resistance, Up to 4 channels for discrete input or 2-wire resistance |
| Power Supply | 3.6 V Lithium thionyl chloride (LiSOCl2), D Size, Non-Rechargeable (24 VDC Option) |
| Frequency | 2.4 GHz ISM band (2400 to 2483.5 MHz) |
| Enclosure | Type 4X, IP66/IP67 |
| Approvals | CSA, FM, ATEX, IECEx |
| Mounting | Bracket for 2 in (50 mm) pipe (vertical/horizontal) or wall; vertical antenna orientation recommended |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 50000547-501 | PLUG KIT DH M20 SS | Request quotation |
| 50000547-502 | PLUG KIT DH M20 CS | Request quotation |
| 50018278-501 | 1.0M LIG PROT CABLE B-TYP N-N | Request quotation |
| 50018278-503 | 3.0M LIT PROT CABLE B-TYPE N-N | Request quotation |
| 50018278-510 | 10.0M LIT PRO CABLE B-TYPE N-N | Request quotation |
| 50018279-590 | REMOTE SURGE ARRESTOR FHSS ANT | Request quotation |
| 50018414-501 | 8 DBI REMOTE OMNI FHSS ANTENNA | Request quotation |
| 50018415-501 | REMOTE DIRECTIONAL 14DBI ANTEN | Request quotation |
| 50021832-501 | KIT PLUG PIPE HEADLESS SKT | Request quotation |
| 50021832-502 | CONDUIT PLUG 1/2NPT(SS) | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Smartline-Wireless-Temp-Transmitter · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
