Gas Risers
Transition Fittings
Perfection Transition Fittings join steel and polyethylene in gas distribution systems.
Perfection Transition Fittings join steel and polyethylene in gas distribution systems. Factory assembly combines a positive seal with additional O-ring protection, and threaded or weld-end outlets support different piping layouts. Several polyethylene materials and metric options are listed, with the selected transition required to match both pipe sizes and the intended gas application.
Features & Benefits
- Size range
- ½ IPS × ½ CTS through 12 IPS × 12 IPS
- Outlet forms
- Threaded or weld end
- Permanent factory assembly and protected seal
Applications
- Steel-to-polyethylene gas transitions
General Overview
- Applications
- Gas applications requiring steel-to-polyethylene transition
- Typical Uses
- Connecting steel pipelines to polyethylene pipelines
- Product Type
- Transition fitting (steel to PE connection fitting)
Operating Conditions
- Temperature Range
- Not explicitly specified in document
Variants & Options
- Size Range
- 1/2 in IPS x 1/2 in CTS to 12 in IPS x 12 in IPS
Configuration
- SDR Compatibility
- SDR 10, SDR 11, SDR 11.5, SDR 13.5
Mechanical & Physical
- Joint Type
- Steel-to-PE bonded transition
Installation
- Installation Type
- Threaded or Weld-End Steel Side
Construction
- Design Type
- Compact, integrated steel-to-PE fitting
- Construction Materials
- Steel (threaded or weld-end outlet) Steel Side; PE 2406, PE 3408, PE 4710 Polyethylene Side
Flow & Performance
- Density Variants
- Medium density (2406), High density (3408, 4710)
Connection Options
- Connection Type
- Threaded and Weld-End Outlets
Product Identification
- Assembly Type
- Permanent factory-assembled fitting
Safety & Compliance
- Approvals
- ASTM D-2513 Category 1, ANSI B1.20, ANSI B31.8, US DOT Part 192, NFPA-58, CSA B137.4, Meets or exceeds industry regulatory requirements
| Parameter | Published value / configuration |
|---|---|
| Applications | Gas applications requiring steel-to-polyethylene transition |
| Typical Uses | Connecting steel pipelines to polyethylene pipelines |
| Product Type | Transition fitting (steel to PE connection fitting) |
| Temperature Range | Not explicitly specified in document |
| Size Range | 1/2 in IPS x 1/2 in CTS to 12 in IPS x 12 in IPS |
| SDR Compatibility | SDR 10, SDR 11, SDR 11.5, SDR 13.5 |
| Joint Type | Steel-to-PE bonded transition |
| Installation Type | Threaded or Weld-End Steel Side |
| Design Type | Compact, integrated steel-to-PE fitting |
| Construction Materials | Steel (threaded or weld-end outlet) Steel Side; PE 2406, PE 3408, PE 4710 Polyethylene Side |
| Density Variants | Medium density (2406), High density (3408, 4710) |
| Connection Type | Threaded and Weld-End Outlets |
| Assembly Type | Permanent factory-assembled fitting |
| Approvals | ASTM D-2513 Category 1, ANSI B1.20, ANSI B31.8, US DOT Part 192, NFPA-58, CSA B137.4, Meets or exceeds industry regulatory requirements |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 52113GN | RING,1 IPS SPACE RETAIN WHITE | Request quotation |
| 52114GN | RING,1 1/4 IPS SPACE RETAIN WHITE | Request quotation |
| 52115GN | RING,2IPS SPACE RETAIN WHITE | Request quotation |
| 52116GN | RING,3/4IPS SPACE RETAIN YELLOW | Request quotation |
| 52168GN | O-RING,BUNA-N 1 1/4CTS | Request quotation |
| 55658GN | CAP,BRASS SFTT TEST ASSY PE4710 | Request quotation |
| 59124GN | CAP SFTT AND NIST VENT TEST CAP PE4710 | Request quotation |
| 701326SGN | PTRN WE 1X1IPS-SDR11.0 XMD | Request quotation |
| 703119GN | PTRN WE 4X4IPS-SDR11.5 XMD | Request quotation |
| 704125GN | PTRN WE 6 IPS X 6 IPS-SDR 13.5 XMD | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Transition Fittings product image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
