Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Systems

Guardian Overspeed Detection System (ODS)

Guardian ODS monitors rotating equipment for overspeed and excessive acceleration using a safety system physically separated from the normal controller.

Guardian ODS monitors rotating equipment for overspeed and excessive acceleration using a safety system physically separated from the normal controller. Settings require direct access to the unit, limiting remote changes. The system integrates with CCC controls and is published as SIL3-capable, providing an independent protection layer for critical turbines and other rotating machinery.

Features & Benefits

Protection
Overspeed and acceleration
Architecture
Physically separate from normal control
  • Adds independent rotating-equipment protection

Applications

  • Compressors and turbines

Detailed capabilities

Product and configuration

Guardian ODS monitors rotating equipment for overspeed and excessive acceleration using a safety system physically separated from the normal controller. Settings require direct access to the unit, limiting remote changes. The system integrates with CCC controls and is published as SIL3-capable, providing an independent protection layer for critical turbines and other rotating machinery.

  • Protection: Overspeed and acceleration
  • Architecture: Physically separate from normal control

Manufacturer reference ↗

Operation and integration

Guardian ODS monitors speed and acceleration independently of the normal process controller. Settings can be changed only by direct access to the unit, supporting separation of routine control and protection. The page publishes SIL3 capability and references API670, API611 and API612 for the configured overspeed arrangement, with integration to CCC systems for the needed operating visibility.

Manufacturer reference ↗

Application and selection

This device serves turbine and compressor protection against dangerous rotational conditions. Its separate hardware helps avoid a shared controller failure path, while the applicable certificate, sensors, voting and trip implementation define the complete safety function. The product page does not make every connected rotating-machine installation automatically compliant.

Manufacturer reference ↗

Case studies & further resources

Manufacturer Document

Guardian Overspeed Detection System (ODS) Specification Sheet

View resource ↗

Specifications

Technical Specifications

Protection Functions
Overspeed shutdown; optional over-acceleration protection
Speed Inputs
1 per module, 3 total
MPU Input
100–32000 Hz at 1–35 Vrms
Proximity Probe Input
0.5–25000 Hz at 24 VDC
Gear-Tooth Range
1–320 teeth
Redundant Power Sources
2 redundant supplies; high-voltage option 88–264 VAC at 47–63 Hz or 90–150 VDC, 90 W; low-voltage option 18–32 VDC, 100 W
Discrete Inputs
3 per module, 9 total: alarm/trip reset, start and speed-fail override commands
Shutdown Relay Outputs
Voted-relay models: 2 shutdown outputs with 2-out-of-3 voting; 8 A at 220 VAC or 8 A at 24 VDC
Alarm Relay Outputs
Voted-relay models: 1 per module, 3 total; 2 A at 24 VDC
Analog Speed Readout
4–20 mA; 1 per module, 3 total
Communication Ports
1 per module, 3 total; RS-232, RS-422 and RS-485 Modbus
Operating Temperature
−20 to +60 °C (−4 to +140 °F)
Location Protection Rating
IP56-rated locations
Approximate Dimensions Including Faceplate
330 × 445 × 159 mm (13 × 17.5 × 6.25 in)
Event History
Last 50 trip/alarm events and last 20 overspeed events, with times; non-volatile memory
Published North American Compliance
CSA Class I, Division 2, Groups A/B/C/D, T4 at 60 °C ambient, for Canada and USA (manufacturer DS8405 statement)
Published European Compliance
EMC 2014/30/EU; ATEX 2014/34/EU Zone 2, Category 3, Group II G, Ex nA II T4 (manufacturer DS8405 statement)
Published Functional-Safety Compliance
TÜV SIL-3 per IEC 61508 Parts 1–7, as stated in manufacturer DS8405
Published Machinery Standards
API670, API612 and API611, as stated in manufacturer DS8405
Guardian Overspeed Detection System (ODS) — manufacturer page values
ParameterPublished value / configuration
Protection FunctionsOverspeed shutdown; optional over-acceleration protection
Speed Inputs1 per module, 3 total
MPU Input100–32000 Hz at 1–35 Vrms
Proximity Probe Input0.5–25000 Hz at 24 VDC
Gear-Tooth Range1–320 teeth
Redundant Power Sources2 redundant supplies; high-voltage option 88–264 VAC at 47–63 Hz or 90–150 VDC, 90 W; low-voltage option 18–32 VDC, 100 W
Discrete Inputs3 per module, 9 total: alarm/trip reset, start and speed-fail override commands
Shutdown Relay OutputsVoted-relay models: 2 shutdown outputs with 2-out-of-3 voting; 8 A at 220 VAC or 8 A at 24 VDC
Alarm Relay OutputsVoted-relay models: 1 per module, 3 total; 2 A at 24 VDC
Analog Speed Readout4–20 mA; 1 per module, 3 total
Communication Ports1 per module, 3 total; RS-232, RS-422 and RS-485 Modbus
Operating Temperature−20 to +60 °C (−4 to +140 °F)
Location Protection RatingIP56-rated locations
Approximate Dimensions Including Faceplate330 × 445 × 159 mm (13 × 17.5 × 6.25 in)
Event HistoryLast 50 trip/alarm events and last 20 overspeed events, with times; non-volatile memory
Published North American ComplianceCSA Class I, Division 2, Groups A/B/C/D, T4 at 60 °C ambient, for Canada and USA (manufacturer DS8405 statement)
Published European ComplianceEMC 2014/30/EU; ATEX 2014/34/EU Zone 2, Category 3, Group II G, Ex nA II T4 (manufacturer DS8405 statement)
Published Functional-Safety ComplianceTÜV SIL-3 per IEC 61508 Parts 1–7, as stated in manufacturer DS8405
Published Machinery StandardsAPI670, API612 and API611, as stated in manufacturer DS8405

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗
Manufacturer sources

https://process.honeywell.com/us/en/products/turbomachinery-automation-systems/ccc-pro-built/safety-systems/guardian-overspeed-detection-system-ods

Last source check: 2026-11-02

Guardian Overspeed Detection System (ODS) Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry