Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Control Valves

VR400/VR800 Series

VR400/VR800 class-A servo-regulated combination valves control gaseous fuel in burners, boilers, furnaces and other gas appliances.

VR400/VR800 class-A servo-regulated combination valves control gaseous fuel in burners, boilers, furnaces and other gas appliances. The published model pairs correspond to different pipe sizes. Although the prose introduces three versions, the source lists additional identifiers; the exact model-to-size entries should govern selection rather than the introductory count.

Features & Benefits

Ambient Temperature Range
-15 to +60 deg C (5 to +140 deg F)
Voltage Rating
230 VAC, 50/60 Hz|24 VAC, 50/60 Hz
Valve Sizes
DN 15 (1/2 in), DN 20 (3/4 in), DN 25 (1 in), DN 32 (1-1/4 in) Straight Flanged Connections
Valve Series
VR400/VR800
Valve Indicator LEDs
DBI: 1 LED; IP: 2 LEDs
Strainer Material
AISI 303 steel, 0.34 mm mesh
Storage Temperature Range
-20 to +40 deg C (-4 to +104 deg F)
Seal Material
Hydrocarbon-resistant NBR
Product Type
Class A servo‑regulated combination gas valve with dual shut‑off valves
Operating Voltage Range
85 to 110% of rated voltage
Opening Time
Dead time max. 1 second; VR434 <0.5 second
Minimum Regulating Capacity
1 to 1.5 m³/h depending on model
Maximum Leakage
40 cm³/h (DN ≤ 25)|50 cm³/h (DN 32) at 6 mbar
Installation Orientation
Upright or horizontal; ±90 deg tolerance
Fuel Type
Gaseous fuels (manufactured, Natural, and LP Gas)
Enclosure Rating
IP40
Electrical Connections
DIN 43650 plug connector (Form A/B depending on option)
Duty Cycle
Coils suitable for permanent energization
Closing Time
<1 seconds for all valves
Body Material
Die-Cast Aluminum Alloy
Approvals
EU (GAR), UKCA, EN 88‑1, EN 126

Applications

  • Gas burners
  • Atmospheric gas boilers
  • Melting furnaces
  • Incinerators

Specifications

Environmental Conditions

Ambient Temperature Range
-15 to +60 deg C (5 to +140 deg F)
Enclosure Rating
IP40

Electrical Specifications

Voltage Rating
230 VAC, 50/60 Hz; 24 VAC, 50/60 Hz
Operating Voltage Range
85 to 110% of rated voltage

Dimensions & Size Specifications

Valve Sizes
DN 15 (1/2 in), DN 20 (3/4 in), DN 25 (1 in), DN 32 (1-1/4 in) Straight Flanged Connections

Actuation, Valve & Motion Control Specifications

Valve Series
VR400/VR800
Valve Indicator LEDs
DBI: 1 LED; IP: 2 LEDs
Opening Time
Dead time max. 1 second; VR434 <0.5 second
Maximum Leakage
40 cm³/h (DN ≤ 25); 50 cm³/h (DN 32) at 6 mbar
Closing Time
<1 seconds for all valves

Material Specifications

Strainer Material
AISI 303 steel, 0.34 mm mesh
Seal Material
Hydrocarbon-resistant NBR
Body Material
Die-Cast Aluminum Alloy

Storage/Transport Temperatures

Storage Temperature Range
-20 to +40 deg C (-4 to +104 deg F)

Overview

Product Type
Class A servo‑regulated combination gas valve with dual shut‑off valves
Models
VR415, VR420, VR425, VR432, VR434, VR815, VR820, VR825, VR832

Processing & Performance Metrics

Minimum Regulating Capacity
1 to 1.5 m³/h depending on model
Duty Cycle
Coils suitable for permanent energization

Installation & Mounting Specifications

Installation Orientation
Upright or horizontal; ±90 deg tolerance

Fuel, Gas & Media Specifications

Fuel Type
Gaseous fuels (manufactured, Natural, and LP Gas)

Connections & Interfaces

Electrical Connections
DIN 43650 plug connector (Form A/B depending on option)

Standards & Certifications

Approvals
EU (GAR), UKCA, EN 88‑1, EN 126

Applications & Compatibility

Applications
Gas‑Fired Power Burners, Atmospheric Boilers, Melting Furnaces, Incinerators, Gas Appliances
VR400/VR800 Series — manufacturer page values
ParameterPublished value / configuration
Ambient Temperature Range-15 to +60 deg C (5 to +140 deg F)
Enclosure RatingIP40
Voltage Rating230 VAC, 50/60 Hz; 24 VAC, 50/60 Hz
Operating Voltage Range85 to 110% of rated voltage
Valve SizesDN 15 (1/2 in), DN 20 (3/4 in), DN 25 (1 in), DN 32 (1-1/4 in) Straight Flanged Connections
Valve SeriesVR400/VR800
Valve Indicator LEDsDBI: 1 LED; IP: 2 LEDs
Opening TimeDead time max. 1 second; VR434 <0.5 second
Maximum Leakage40 cm³/h (DN ≤ 25); 50 cm³/h (DN 32) at 6 mbar
Closing Time<1 seconds for all valves
Strainer MaterialAISI 303 steel, 0.34 mm mesh
Seal MaterialHydrocarbon-resistant NBR
Body MaterialDie-Cast Aluminum Alloy
Storage Temperature Range-20 to +40 deg C (-4 to +104 deg F)
Product TypeClass A servo‑regulated combination gas valve with dual shut‑off valves
ModelsVR415, VR420, VR425, VR432, VR434, VR815, VR820, VR825, VR832
Minimum Regulating Capacity1 to 1.5 m³/h depending on model
Duty CycleCoils suitable for permanent energization
Installation OrientationUpright or horizontal; ±90 deg tolerance
Fuel TypeGaseous fuels (manufactured, Natural, and LP Gas)
Electrical ConnectionsDIN 43650 plug connector (Form A/B depending on option)
ApprovalsEU (GAR), UKCA, EN 88‑1, EN 126
ApplicationsGas‑Fired Power Burners, Atmospheric Boilers, Melting Furnaces, Incinerators, Gas Appliances

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
CO020012DINFACE CONNECTOR FOR VR400 SERIES. COLORequest quotation
CPCSE20025SCHEDE ELETTR. X SERVO-COMBI(DBI)Request quotation
CPCSE20026SCHEDA ELETTR. X SERVO-COMBI (IP)Request quotation
KTSERVF1KIT PER SERVO COMBI CON VENTURIRequest quotation
KTSERVF1BKIT PER SERVO COMBI CON VENTURIRequest quotation
KTVIT001KIT VITI PER VENTURI ( 150 /300 KW )Request quotation
TP030008BPLUG ASSEMBLY G1/8"Request quotation
V4730C1006-0000SERVO-COMBI 1/2" 100MBAR 120V IP VENTURIRequest quotation
V4730C1014-0000SERVO-COMBI 3/4" 100MBAR 120V IP VENTURIRequest quotation
V4730C1022-0000SERVO-COMBI 1" 100MBAR 120V IP VENTURI URequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/control-valves/vr400-vr800-series

Last source check: 2026-11-02

VR400/VR800 Series · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry