Butterfly Valves & Actuators
Modutrol Motors
Modutrol reversing proportional motors position burner rate valves, dampers or auxiliary equipment.
Modutrol reversing proportional motors position burner rate valves, dampers or auxiliary equipment. A three-wire controller drives the motor, and the stroke can be adjusted in the field to 90 or 160 degrees. The page identifies M941A/C/D replacement use and a vibration-resistant electronic drive for flame-safeguard installations.
Features & Benefits
- Ambient Temperature Range
- -40 to +66 deg C (-40 to +150 deg F at 25 % duty cycle)
- Enclosure Rating
- Wiring box provides NEMA 3 weather protection
- Standard Timing
- 15 s (90 deg )/30 s (160 deg ) or extended timing options (2 min/4 min models)
- Crankshaft Size
- 3/8 in (9.5 mm) square shaft
- Supply Voltage
- 24 VAC (external transformer) or 120/208/240 VAC, 50/60 Hz with internal transformer
- Torque Rating
- High‑torque (150 lb‑in) and extra‑high torque (300 lb‑in) depending on model suffix
- Stroke Angle
- Fixed 90 deg or 160 deg , or field‑adjustable 90 to 160 deg depending on suffix
- Control Type
- Series 90 proportional control
- Shaft Type
- Single‑ended or dual‑ended shaft (model dependent)
- Approvals
- UL Listed (E4436), CSA Certified (LR1620)
- Material
- Die‑Cast Aluminum Housing
- Field-adjustable stroke supports different driven components.
Applications
- Burner firing-rate valve, damper and auxiliary positioning
Environmental Conditions
- Ambient Temperature Range
- -40 to +66 deg C (-40 to +150 deg F at 25 % duty cycle)
- Enclosure Rating
- Wiring box provides NEMA 3 weather protection
Control, Safety & Timing Characteristics
- Standard Timing
- 15 s (90 deg )/30 s (160 deg ) or extended timing options (2 min/4 min models)
Dimensions & Size Specifications
- Crankshaft Size
- 3/8 in (9.5 mm) square shaft
Electrical Specifications
- Supply Voltage
- 24 VAC (external transformer) or 120/208/240 VAC, 50/60 Hz with internal transformer
Actuation, Valve & Motion Control Specifications
- Torque Rating
- High‑torque (150 lb‑in) and extra‑high torque (300 lb‑in) depending on model suffix
- Stroke Angle
- Fixed 90 deg or 160 deg , or field‑adjustable 90 to 160 deg depending on suffix
- Shaft Type
- Single‑ended or dual‑ended shaft (model dependent)
Control, Logic & Functional Behavior
- Control Type
- Series 90 proportional control
Applications & Compatibility
- Applications
- Combustion air dampers, gas valves, butterfly valves, HVAC and industrial process control; Reversing, proportional motors for operating valves or dampers in Series 90 electric modulating circuits
Standards & Certifications
- Approvals
- UL Listed (E4436), CSA Certified (LR1620)
Material Specifications
- Material
- Die‑Cast Aluminum Housing
| Parameter | Published value / configuration |
|---|---|
| Ambient Temperature Range | -40 to +66 deg C (-40 to +150 deg F at 25 % duty cycle) |
| Enclosure Rating | Wiring box provides NEMA 3 weather protection |
| Standard Timing | 15 s (90 deg )/30 s (160 deg ) or extended timing options (2 min/4 min models) |
| Crankshaft Size | 3/8 in (9.5 mm) square shaft |
| Supply Voltage | 24 VAC (external transformer) or 120/208/240 VAC, 50/60 Hz with internal transformer |
| Torque Rating | High‑torque (150 lb‑in) and extra‑high torque (300 lb‑in) depending on model suffix |
| Stroke Angle | Fixed 90 deg or 160 deg , or field‑adjustable 90 to 160 deg depending on suffix |
| Shaft Type | Single‑ended or dual‑ended shaft (model dependent) |
| Control Type | Series 90 proportional control |
| Applications | Combustion air dampers, gas valves, butterfly valves, HVAC and industrial process control; Reversing, proportional motors for operating valves or dampers in Series 90 electric modulating circuits |
| Approvals | UL Listed (E4436), CSA Certified (LR1620) |
| Material | Die‑Cast Aluminum Housing |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HK301215 | CTL,MTR,150IN LB,90° 160°,30/60S M6284F1 | Request quotation |
| HK61890 | ACT,4 20MA,60IN LB,90°,30S M7285C1009,12 | Request quotation |
| M7284A1012/U | ModIV 150lb-in 120Vac Modulating 30-60s | Request quotation |
| M7284C1083 | MODUTROL MOTOR | Request quotation |
| M7284C1083/U | Damper actuator | Request quotation |
| M9484D4006/U | SPECIAL FOR CANADA 20 VA 24 VOLTS 90 | Request quotation |
| M9484E1009/U | ModIV 75lb-in 24Vac Modulating 15-30s | Request quotation |
| M9484E4003/U | SERIES 2 MOD IV MOTOR | Request quotation |
| M9484F1007/U | MODUTROL MOTOR | Request quotation |
| M9484F1023/U | ModIV 75lb-in 24Vac Modulating 15-30s | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Modutrol Motors · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
