Butterfly Valves & Actuators
Butterfly valves DKR
DKR regulates hot-air or flue-gas flow at burners and is prepared for IC 50 actuation.
DKR regulates hot-air or flue-gas flow at burners and is prepared for IC 50 actuation. An angular indicator shows valve position. Manual or free-shaft forms, disc-clearance or stop-bar choices and a broad DN range adapt the installation, with temperature and pressure capability established by the selected version.
Features & Benefits
- Medium
- Hot air and flue gas
- Ambient Temperature Range
- -20 to +60 deg C
- Installation Orientation
- Clamped between DIN EN 1092 PN16 flanges
- Inlet Pressure Range
- 300 mbar
- Valve Disc Material
- Stainless Steel up to DN65, Heat‑Resistant Cast Iron ≥ DN80|Steel up to DN100, Grey Cast Iron Above (DKR..100/350/450)
- Storage Temperature
- -20 to +40 deg C
- Temperature Class
- Available for 100 deg C, 350 deg C, 450 deg C, and 650 deg C (model‑dependent)
- Product Variants
- DKR..A - Butterfly valves with stop bar|DKR..D - Butterfly valve DKR..D is with valve disc clearance|DKR..F - Butterfly valve with free shaft end (for actuator mounting)|DKR..H (lever) - Butterfly valve with manual lever and angle scale
- Actuator Version
- IDR = DKR with IC50 actuator (DN ≤ 300 preassembled)
- Nominal Sizes
- DN 15 to 500
- Flow Velocity
- ≤ 30 m/s
- Actuator Type
- IC50 axial, linkage, linkage+shock suppressor
- Drive Shaft
- Stainless Steel up to 450 deg C|Steel up to 350 deg C
- Material
- Grey Cast Iron (DKR..100/350/450)|Heat‑Resistant Cast Iron (DKR..650)
- DN
- 15 to 500, for fitting between two flanges
- pu
- max. 300 mbar
- Max. medium temperature
- 100 to 650°C
Applications
- Hot-air or flue-gas regulation at burners
Metering & Process Capability
- Medium
- Hot air and flue gas
Environmental Conditions
- Ambient Temperature Range
- -20 to +60 deg C
Installation & Mounting Specifications
- Installation Orientation
- Clamped between DIN EN 1092 PN16 flanges
Pressure Specifications
- Inlet Pressure Range
- 300 mbar
Material Specifications
- Valve Disc Material
- Stainless Steel up to DN65, Heat‑Resistant Cast Iron ≥ DN80; Steel up to DN100, Grey Cast Iron Above (DKR..100/350/450)
- Material
- Grey Cast Iron (DKR..100/350/450); Heat‑Resistant Cast Iron (DKR..650)
Storage/Transport Temperatures
- Storage Temperature
- -20 to +40 deg C
Temperature Control/Measurement
- Temperature Class
- Available for 100 deg C, 350 deg C, 450 deg C, and 650 deg C (model‑dependent)
Product Overview & Classification
- Product Variants
- DKR..A - Butterfly valves with stop bar; DKR..D - Butterfly valve DKR..D is with valve disc clearance; DKR..F - Butterfly valve with free shaft end (for actuator mounting); DKR..H (lever) - Butterfly valve with manual lever and angle scale
Actuation, Valve & Motion Control Specifications
- Actuator Version
- IDR = DKR with IC50 actuator (DN ≤ 300 preassembled)
- Actuator Type
- IC50 axial, linkage, linkage+shock suppressor
- Drive Shaft
- Stainless Steel up to 450 deg C; Steel up to 350 deg C
Dimensions & Size Specifications
- Nominal Sizes
- DN 15 to 500
Performance, Flow & Capacity
- Flow Velocity
- ≤ 30 m/s
Applications & Compatibility
- Applications
- Adjusting volumes of hot air/flue gas, control ratio up to 1:10; Roller hearth kilns, forging furnaces, industrial flue‑gas and hot‑air systems
Technical Specifications
- DN
- 15 to 500, for fitting between two flanges
- pu
- max. 300 mbar
- Max. medium temperature
- 100 to 650°C
| Parameter | Published value / configuration |
|---|---|
| Medium | Hot air and flue gas |
| Ambient Temperature Range | -20 to +60 deg C |
| Installation Orientation | Clamped between DIN EN 1092 PN16 flanges |
| Inlet Pressure Range | 300 mbar |
| Valve Disc Material | Stainless Steel up to DN65, Heat‑Resistant Cast Iron ≥ DN80; Steel up to DN100, Grey Cast Iron Above (DKR..100/350/450) |
| Material | Grey Cast Iron (DKR..100/350/450); Heat‑Resistant Cast Iron (DKR..650) |
| Storage Temperature | -20 to +40 deg C |
| Temperature Class | Available for 100 deg C, 350 deg C, 450 deg C, and 650 deg C (model‑dependent) |
| Product Variants | DKR..A - Butterfly valves with stop bar; DKR..D - Butterfly valve DKR..D is with valve disc clearance; DKR..F - Butterfly valve with free shaft end (for actuator mounting); DKR..H (lever) - Butterfly valve with manual lever and angle scale |
| Actuator Version | IDR = DKR with IC50 actuator (DN ≤ 300 preassembled) |
| Actuator Type | IC50 axial, linkage, linkage+shock suppressor |
| Drive Shaft | Stainless Steel up to 450 deg C; Steel up to 350 deg C |
| Nominal Sizes | DN 15 to 500 |
| Flow Velocity | ≤ 30 m/s |
| Applications | Adjusting volumes of hot air/flue gas, control ratio up to 1:10; Roller hearth kilns, forging furnaces, industrial flue‑gas and hot‑air systems |
| DN | 15 to 500, for fitting between two flanges |
| pu | max. 300 mbar |
| Max. medium temperature | 100 to 650°C |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| KS03149200 | VLV,BFLY,DKR 15Z03F100D,DN 15,300 MBAR,1 | Request quotation |
| KS03149201 | DKR 15Z03F350D | Request quotation |
| KS03149202 | DKR 15Z03F450D | Request quotation |
| KS03149203 | DKR 20Z03F100D | Request quotation |
| KS03149204 | DKR 20Z03F350D | Request quotation |
| KS03149205 | DKR 20Z03F450D | Request quotation |
| KS03149206 | DKR 25Z03F100D | Request quotation |
| KS03149207 | DKR 25Z03F350D | Request quotation |
| KS03149208 | DKR 25Z03F450D | Request quotation |
| KS03149209 | DKR 25Z03F650D | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Butterfly valves · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
