Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Glass & Oxygen Burners

PrimeFire 400

PrimeFire 400 uses a flat oxy-fuel flame and a rear precombustor that cracks part of the fuel stream.

PrimeFire 400 uses a flat oxy-fuel flame and a rear precombustor that cracks part of the fuel stream. The resulting carbon particles raise luminosity and radiant transfer toward the glass. The family lists natural-gas and oil firing, four maximum-capacity groups and 4:1 turndown, with reduced peak temperature supporting lower NOx.

Features & Benefits

Turndown Ratio
4:1
Sizes
2, 4, 10, 20 MMBtu/hr
Nozzle Material
Oxygen - 304 stainless steel (2MM-10MM), 446 stainless steel (20MM), Gas - Inconel 600 (2MM-10MM), 446 stainless steel (20MM)
NOx Emissions
Up to 18% reduction in thermal NOx due to lower overall flame temperature
Maintenance Interval
Shut off gas for 15-20 seconds with oxygen flowing to burn off carbon deposits
Heat Transfer Mechanism
Pre‑combustor creates free carbon particles to increase luminosity and radiant heat transfer
Fuel Type
Natural Gas or Fuel Oil
Flame Velocity
15.5 to 48.8 m/s
Flame Length
0.8 to 2.44 m
Flame Geometry
Flat flame
Cooling
Non‑water cooled
Capacity Range
2,000,000 to 20,000,000 Btu/hr
Burner Type
Oxy-fuel flat flame burner with gas pre-heating (oxygen injected into gas stream prior to main combustion)
  • The precombustor increases luminosity and transfer toward the glass.

Applications

  • Glass melting

Detailed capabilities

Precombustion and radiant transfer

PrimeFire 400 mixes part of the oxygen with fuel in a rear precombustor. Fuel cracking creates free carbon particles that increase luminosity and radiation to the glass, while flat-flame geometry distributes the heat. Natural-gas and oil arrangements are listed with four capacity groups. The stated turndown and low-NOx advantages apply to this design and should not be transferred to other PrimeFire geometries.

Manufacturer reference ↗

Features and benefits

  • The precombustor increases luminosity and transfer toward the glass.

Manufacturer reference ↗

Published application context

  • Glass melting

Manufacturer reference ↗

Specifications

Applications & Compatibility

Applications
Enhanced flame coverage and uniform heat distribution; Glass melting furnaces

Performance, Flow & Capacity

Turndown Ratio
4:1
Heat Transfer Mechanism
Pre‑combustor creates free carbon particles to increase luminosity and radiant heat transfer

Dimensions & Size Specifications

Sizes
2, 4, 10, 20 MMBtu/hr

Material Specifications

Nozzle Material
Oxygen - 304 stainless steel (2MM-10MM), 446 stainless steel (20MM), Gas - Inconel 600 (2MM-10MM), 446 stainless steel (20MM)

Processing & Performance Metrics

NOx Emissions
Up to 18% reduction in thermal NOx due to lower overall flame temperature
Capacity Range
2,000,000 to 20,000,000 Btu/hr

Electrical Specifications

Maintenance Interval
Shut off gas for 15-20 seconds with oxygen flowing to burn off carbon deposits

Fuel, Gas & Media Specifications

Fuel Type
Natural Gas or Fuel Oil

Ignition, Flame & Supervision Specifications

Flame Velocity
15.5 to 48.8 m/s
Flame Geometry
Flat flame

Burner/Flame‑Related Lengths

Flame Length
0.8 to 2.44 m

Thermal, Flow & Process Characteristics

Cooling
Non‑water cooled

Overview

Burner Type
Oxy-fuel flat flame burner with gas pre-heating (oxygen injected into gas stream prior to main combustion)
PrimeFire 400 — manufacturer page values
ParameterPublished value / configuration
ApplicationsEnhanced flame coverage and uniform heat distribution; Glass melting furnaces
Turndown Ratio4:1
Heat Transfer MechanismPre‑combustor creates free carbon particles to increase luminosity and radiant heat transfer
Sizes2, 4, 10, 20 MMBtu/hr
Nozzle MaterialOxygen - 304 stainless steel (2MM-10MM), 446 stainless steel (20MM), Gas - Inconel 600 (2MM-10MM), 446 stainless steel (20MM)
NOx EmissionsUp to 18% reduction in thermal NOx due to lower overall flame temperature
Capacity Range2,000,000 to 20,000,000 Btu/hr
Maintenance IntervalShut off gas for 15-20 seconds with oxygen flowing to burn off carbon deposits
Fuel TypeNatural Gas or Fuel Oil
Flame Velocity15.5 to 48.8 m/s
Flame GeometryFlat flame
Flame Length0.8 to 2.44 m
CoolingNon‑water cooled
Burner TypeOxy-fuel flat flame burner with gas pre-heating (oxygen injected into gas stream prior to main combustion)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
020778-1CMBSTR,RFRCT,PF400,20MM BTU/HR,330MM X 5Request quotation
020778-2CMBSTR,RFRCT,PF400,20MM BTU/HR,330MM X 5Request quotation
020778-4CMBSTR,RFRCT,PF400,20MM BTU/HR,330MM X 5Request quotation
020778-5CMBSTR,RFRCT,PF400,20MM BTU/HR,330MM X 5Request quotation
020787-1CMBSTR,RFRCT,PF400,10MM BTU/HR,330MM X 4Request quotation
020787-2CMBSTR,RFRCT,PF400,10MM BTU/HR,330MM X 4Request quotation
020787-3CMBSTR,RFRCT,PF400,10MM BTU/HR,330MM X 4Request quotation
020787-4CMBSTR,RFRCT,PF400,10MM BTU/HR,330MM X 4Request quotation
020787-5CMBSTR,RFRCT,PF400,10MM BTU/HR,330MM X 4Request quotation
020797GSKT,FLG,MTG,CMBSTR,PRMFR,PF400,10 MM BTRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/glass-and-oxygen-burners/primefire-400

Last source check: 2026-11-02

PrimeFire 400 Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry