Fixed Gauging
T901 Temperature and Pressure Transmitters
T901 combines cargo temperature and inert-gas pressure measurement for marine tanks.
T901 combines cargo temperature and inert-gas pressure measurement for marine tanks. Three Pt100 sensing levels sit within sealed stainless-steel tubes, while a ceramic pressure sensor monitors the gas space. Direct connection to the EM540 radar system brings these readings into cargo monitoring, helping operators track heating and inerting conditions during liquid-cargo management.
Models: T901
Features & Benefits
- Temperature points
- Top, middle and bottom
- Sensor type
- Pt100 RTD and ceramic pressure sensor
- Supports monitoring of cargo heating and inert-gas conditions
Applications
- Marine liquid-cargo temperature and pressure monitoring
Detailed capabilities
Product and configuration
T901 combines cargo temperature and inert-gas pressure measurement for marine tanks. Three Pt100 sensing levels sit within sealed stainless-steel tubes, while a ceramic pressure sensor monitors the gas space. Direct connection to the EM540 radar system brings these readings into cargo monitoring, helping operators track heating and inerting conditions during liquid-cargo management.
- Temperature points: Top, middle and bottom
- Sensor type: Pt100 RTD and ceramic pressure sensor
Operation and integration
T901 places Pt100 elements at three heights in sealed stainless-steel tubes to measure cargo temperature, while a ceramic pressure element monitors the inert-gas space. Gas-tight sensing and double separation protect the temperature arrangement, and ceramic construction addresses chemical and petroleum vapors. The published connection is directly to the EM540 radar gauge so both variables enter the cargo-monitoring system.
Application and selection
The measurements help crews identify loss of inert gas and overheating that could create unsafe pressure conditions. This is the described integrated temperature/pressure arrangement, not a claim that the transmitter independently controls the heating or inerting system. Tank layout and connection to the compatible radar system determine the installation.
I/O Capabilities
- Outputs
- 0.5 to 2.5 VDC (3 wires)
- Mounting/Connection
- Flexible hose (BV2 or BV3 type, optional), process connection details in installation manual
Environmental Conditions
- Operating Ambient Temperature
- -35 to +70 deg C
- Storage Temperature Range
- -55 to +85 deg C
- Pressure Sensor Material
- Stainless Steel 316L, Ceramic Diaphragm
- Allowable Overpressure
- 4000 mbar (Absolute)
- Temperature Sensors
- 1, 2, or 3 sensors depending on model; PT100Ω at 0 deg C (3 wires)
- Temperature Range
- -46 to +250 deg C
- Pressure Ratings
- 800 to 2000 mbar (Absolute)
Material Specifications
- Temperature Sensor Material
- Stainless steel 316L
- Housing Material
- Stainless Steel 316L
Standards & Certifications
- Intrinsic Safety Approvals
- IECEx, ATEX II 1 G D Ex ia IIC or IIB T6 Ga, Ex ia IIIC T80 deg C Da
- Protection Class
- IP66, IP67
- Approvals
- Approved by major classification societies
Technical Specifications
- Electrical Connections
- 3-wire System
Processing & Performance Metrics
- Temperature Accuracy
- IEC 751 class B
- Pressure Accuracy
- ±0.3% Full Scale at 20 deg C
Overview
- Special Features
- Modular design, withstands saline environment, easy maintenance, pressure sensor can be disconnected for cleaning Millimeter-PRD
Mechanical & Physical Properties
- Probe Lengths
- Standard: 1m, 2m, 3m, 5m, 8m, 15m, ... (custom lengths available)
Electrical Specifications
- Power Supply
- 5 VDC
Applications & Compatibility
- Applications
- Combined temperature & pressure transmitter connected directly to radar; Liquid cargo monitoring; Used for density correction and cargo monitoring in marine tanks.
| Parameter | Published value / configuration |
|---|---|
| Outputs | 0.5 to 2.5 VDC (3 wires) |
| Mounting/Connection | Flexible hose (BV2 or BV3 type, optional), process connection details in installation manual |
| Operating Ambient Temperature | -35 to +70 deg C |
| Storage Temperature Range | -55 to +85 deg C |
| Pressure Sensor Material | Stainless Steel 316L, Ceramic Diaphragm |
| Allowable Overpressure | 4000 mbar (Absolute) |
| Temperature Sensors | 1, 2, or 3 sensors depending on model; PT100Ω at 0 deg C (3 wires) |
| Temperature Range | -46 to +250 deg C |
| Pressure Ratings | 800 to 2000 mbar (Absolute) |
| Temperature Sensor Material | Stainless steel 316L |
| Housing Material | Stainless Steel 316L |
| Intrinsic Safety Approvals | IECEx, ATEX II 1 G D Ex ia IIC or IIB T6 Ga, Ex ia IIIC T80 deg C Da |
| Protection Class | IP66, IP67 |
| Approvals | Approved by major classification societies |
| Electrical Connections | 3-wire System |
| Temperature Accuracy | IEC 751 class B |
| Pressure Accuracy | ±0.3% Full Scale at 20 deg C |
| Special Features | Modular design, withstands saline environment, easy maintenance, pressure sensor can be disconnected for cleaning Millimeter-PRD |
| Probe Lengths | Standard: 1m, 2m, 3m, 5m, 8m, 15m, ... (custom lengths available) |
| Power Supply | 5 VDC |
| Applications | Combined temperature & pressure transmitter connected directly to radar; Liquid cargo monitoring; Used for density correction and cargo monitoring in marine tanks. |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 26024-1 | T90-I TEMP.SENSOR PN16 DN32 L1=200mm | Request quotation |
| 26024-2 | T90-I TEMP.SENSOR PN16 DN32 L1=215mm | Request quotation |
| 26024-3 | T90-I TEMP.SENSOR PN16-DN32 L1=250mm | Request quotation |
| 28145-HMS | TEMPERATURE SENSOR RP16,DDG M24 L=200mm | Request quotation |
| 32868-4 | T901-P 900/1300 SPARE PART | Request quotation |
| 32868-6 | T901-P 800/2000 SPARE PART | Request quotation |
| 32868-8 | T901-P 100/600 KIT FOR ABSOLUTE PRESSURE | Request quotation |
| 34269-6 | CELL T901P K 800/2000 M34269 WIRES 250MM | Request quotation |
| 34720-HMS | ATEX. CONVERT T24-10-1P2-GF or PR 5333D | Request quotation |
| 34813-3 | KIT PRESSURE T901-P xxCxx 900-1300 KALRE | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
T901 Temperature and Pressure Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
T901 Temperature and Pressure Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
T901 Temperature and Pressure Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
