Fixed Gauging
PL3700X Pressure and Level Transmitters
PL3700X uses a ceramic pressure sensor and temperature-compensated electronics for marine pressure and tank-level measurements.
PL3700X uses a ceramic pressure sensor and temperature-compensated electronics for marine pressure and tank-level measurements. Submersible and side-mounted arrangements cover ballast, service and water tanks, with ATMO and MAN versions serving atmospheric and cargo-line pressure duties. A 4–20 mA HART connection supports communication and diagnostics, including installations with applicable intrinsic-safety approvals.
Models: PL3700X
Features & Benefits
- Output
- 4–20 mA HART
- Special versions
- ATMO and MAN
- Temperature compensation reduces periodic adjustment needs
Applications
- Ballast and service tanks
- Water tanks
- Cargo-line and atmospheric pressure
Detailed capabilities
Product and configuration
PL3700X uses a ceramic pressure sensor and temperature-compensated electronics for marine pressure and tank-level measurements. Submersible and side-mounted arrangements cover ballast, service and water tanks, with ATMO and MAN versions serving atmospheric and cargo-line pressure duties. A 4–20 mA HART connection supports communication and diagnostics, including installations with applicable intrinsic-safety approvals.
- Output: 4–20 mA HART
- Special versions: ATMO and MAN
Operation and integration
PL3700X uses a ceramic sensor and compensated digital electronics to produce a 4–20 mA HART signal. It can be immersed using an adaptor bracket or fitted to a side flange, with stainless-steel or special-composite bodies. HART supports setup and diagnostics at deck level, while the sensor construction is intended to resist wear and ballast-water-treatment conditions.
Application and selection
The main arrangements cover pressure and level in ballast, service and water tanks. ATMO and MAN address atmospheric and cargo-line pressure respectively. The instrument's intrinsic-safety and material configuration must suit the actual installation and medium; the special pressure versions should not be mistaken for interchangeable tank-level assemblies.
Processing & Performance Metrics
- Accuracy
- ±0.3% full scale at 20 deg C
Standards & Certifications
- Protection Class
- Transducer: IP68, Remote Electronic Box: IP66/IP67
- Intrinsic Safety Approvals
- IECEx, ATEX, II 1 G D, Ex ia IIC T6 Ga or Ex ia IIB T6 Ga, Ex ia IIIC T80 deg C Da IP66/IP67
Electrical Specifications
- Power Supply
- 12 to 28 VDC
- Output Signal
- 4 to 20 mA, 2-wires
Environmental Conditions
- Overpressure
- 18 bar
- Operating Temperature Range
- Transducer: -40 to + 125 deg C, Remote electronic box: - 25 to +70 deg C
Applications & Compatibility
- Applications
- The PL3700X transmitters are typically used to measure the level and temperature of service tanks, ballast tanks and water tanks, as well as pressure of all pipes, atmospheric, draft, inert gas, etc.
Others
- Pressure Range
- 0.8 to 2 bar
| Parameter | Published value / configuration |
|---|---|
| Accuracy | ±0.3% full scale at 20 deg C |
| Protection Class | Transducer: IP68, Remote Electronic Box: IP66/IP67 |
| Intrinsic Safety Approvals | IECEx, ATEX, II 1 G D, Ex ia IIC T6 Ga or Ex ia IIB T6 Ga, Ex ia IIIC T80 deg C Da IP66/IP67 |
| Power Supply | 12 to 28 VDC |
| Output Signal | 4 to 20 mA, 2-wires |
| Overpressure | 18 bar |
| Operating Temperature Range | Transducer: -40 to + 125 deg C, Remote electronic box: - 25 to +70 deg C |
| Applications | The PL3700X transmitters are typically used to measure the level and temperature of service tanks, ballast tanks and water tanks, as well as pressure of all pipes, atmospheric, draft, inert gas, etc. |
| Pressure Range | 0.8 to 2 bar |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 22963-HMS | PL3700 POLYESTER FACTORY BOX | Request quotation |
| 23278-HMS | GASKET FLAT VITON 44x29x2 | Request quotation |
| 23515-01 | PL3700 PRE-SETTED ELECTRONIC PCB | Request quotation |
| 24479-HMS | KIT PL3700 FIXATION | Request quotation |
| 24805 | ADAPTOR PL3700 G1/2 | Request quotation |
| 26348-HMS | FLEXIBLE BV2+BV2 L= 0.9m S.S./S.S. | Request quotation |
| 27140-HMS | PE PG SET FOR PL3700 | Request quotation |
| 27412-HMS | KIT PL3700 SCREWED FLANGE | Request quotation |
| 30689 | TOP TANK FITTING - CABLE PL3700 | Request quotation |
| 30969-1 | PL3700 ATM PRESS.TRANS. SPEC.CABLE GLAND | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
PL3700X Pressure and Level Transmitters Image · Manufacturer ownership retained; republication licence not independently confirmed
PL3700X Pressure and Level Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
PL3700X Pressure and Level Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
PL3700X Pressure and Level Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
PL3700X Pressure and Level Transmitters image · Manufacturer ownership retained; republication licence not independently confirmed
PL3700X Pressure and Level Transmitters image · Site owner attests manufacturer permission; licence not independently audited
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
