Ultrasonic Meters
Q.Sonic®-plus Ultrasonic Gas Meter
Q.Sonic-plus is a six-path ultrasonic gas meter using a patented path arrangement for flow-profile recognition.
Q.Sonic-plus is a six-path ultrasonic gas meter using a patented path arrangement for flow-profile recognition. It is intended to reduce the effects of upstream installation conditions on gas measurement. The manufacturer identifies natural-gas custody transfer and publishes ISO 17089 accuracy class 1 among its compliance references, with detailed configuration governed by the model documentation.
Features & Benefits
- Paths
- 6
- Published accuracy class
- ISO 17089 class 1
- Flow-profile recognition addresses installation effects
Applications
- Natural gas pipeline custody transfer
Detailed capabilities
Q.Sonic®-plus Ultrasonic Gas Meter — purpose and deployment
Q.Sonic-plus is a six-path ultrasonic gas meter using a patented path arrangement for flow-profile recognition. It is intended to reduce the effects of upstream installation conditions on gas measurement. The manufacturer identifies natural-gas custody transfer and publishes ISO 17089 accuracy class 1 among its compliance references, with detailed configuration governed by the model documentation.
Six-path reflective arrangement
Q.Sonic-plus uses four double-reflection swirl paths and two single-reflection paths in a symmetric configuration. This supports measurement of swirl and asymmetry and diagnostics for fouling or liquids. The source identifies OIML R137, AGA9, MID and ISO17089 class1, keeping the plus geometry and accuracy class separate from the eight-path max.
Source qualification on the final subsection
The final Problems paragraph names Q.Sonic-max even though this page describes Q.Sonic-plus. Its security-package wording may therefore require product confirmation. The plus-specific path arrangement and preceding technical explanation are retained here, while that cross-model paragraph is not silently reassigned as an unqualified plus capability.
Mechanical & Physical Properties
- Sizes
- 3 to 24 in (DN 100 to DN 600), Up to 56 in on request
Standards & Certifications
- Hazardous Location Approvals
- ATEX: II 2 G Ex d ia [ia] IIB+H2 T6 Gb; CSA: Class I, Division 1, Groups B, C and D T6; Ex d ia [ia] IIB+H2 T6; FM: Class I, Division 1, Group A to D T6; IECEx: Ex d ia [ia] IIB+H2 T6 Gb
- Metrological Approvals
- MID, AGA 9
- Ingress Protection
- IP66 (NEMA 4X)
Environmental Conditions
- Process Temperature Range
- Extended: -40 to +80 deg C; MID: -40 to +55 deg C; Standard: -40 to +60 deg C
- Ambient Temperature Range
- Extended: -40 to +55 deg C; MID: -40 to +55 deg C; Standard: -40 to +60 deg C
- Pressure Ratings
- ASME 300 - 600 (others on request)
Communication & Protocols
- Communication Protocols
- Modbus (ASCII, RTU, TCP/IP), UNIFORM, UNIFORM Series IV 4-Path Compatibility Mode, MMS, Built-in Web Server
Measurement & Sensor Related (Measurement Capabilities)
- Typical Uncertainty
- 0.5% (Zero Flow Calibration), 0.2% (High-Pressure Calibration), 0.1% (Linearization)
- Repeatability
- ≤ 0.05%
I/O Capabilities
- Path Configuration
- 6-Path Reflective Technology (Four swirl paths with double reflection, Two single reflection paths)
Material Specifications
- Body Material
- Stainless is an ETO -> LTCS only
Electrical Specifications
- Power Supply
- 24 VDC (18 to 30 V), 10 to 20 W
Applications & Compatibility
- Applications
- Custody Transfer, Gas Exploration, Transmission and Distribution
Communication Interfaces
- Interfaces
- (2) Serial (RS232/485), (1) Ethernet, (2) Freq Outputs, (2) Digital, (2) Analog (4 to 20 mA), (1) USB
Processing & Performance Metrics
- Software
- EnSuite PC Software for Configuration, Diagnostics, Healthcare
Software & Interface
- Display
- 4.3 in Graphical Color Display, 7 Capacitive Soft Keys, LEDs
| Parameter | Published value / configuration |
|---|---|
| Sizes | 3 to 24 in (DN 100 to DN 600), Up to 56 in on request |
| Hazardous Location Approvals | ATEX: II 2 G Ex d ia [ia] IIB+H2 T6 Gb; CSA: Class I, Division 1, Groups B, C and D T6; Ex d ia [ia] IIB+H2 T6; FM: Class I, Division 1, Group A to D T6; IECEx: Ex d ia [ia] IIB+H2 T6 Gb |
| Metrological Approvals | MID, AGA 9 |
| Ingress Protection | IP66 (NEMA 4X) |
| Process Temperature Range | Extended: -40 to +80 deg C; MID: -40 to +55 deg C; Standard: -40 to +60 deg C |
| Ambient Temperature Range | Extended: -40 to +55 deg C; MID: -40 to +55 deg C; Standard: -40 to +60 deg C |
| Pressure Ratings | ASME 300 - 600 (others on request) |
| Communication Protocols | Modbus (ASCII, RTU, TCP/IP), UNIFORM, UNIFORM Series IV 4-Path Compatibility Mode, MMS, Built-in Web Server |
| Typical Uncertainty | 0.5% (Zero Flow Calibration), 0.2% (High-Pressure Calibration), 0.1% (Linearization) |
| Repeatability | ≤ 0.05% |
| Path Configuration | 6-Path Reflective Technology (Four swirl paths with double reflection, Two single reflection paths) |
| Body Material | Stainless is an ETO -> LTCS only |
| Power Supply | 24 VDC (18 to 30 V), 10 to 20 W |
| Applications | Custody Transfer, Gas Exploration, Transmission and Distribution |
| Interfaces | (2) Serial (RS232/485), (1) Ethernet, (2) Freq Outputs, (2) Digital, (2) Analog (4 to 20 mA), (1) USB |
| Software | EnSuite PC Software for Configuration, Diagnostics, Healthcare |
| Display | 4.3 in Graphical Color Display, 7 Capacitive Soft Keys, LEDs |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| QS6P080 | Q.SONIC PLUS DN80 (3") | Request quotation |
| QS6P100 | Q.SONIC PLUS DN100 (4") | Request quotation |
| QS6P150 | Q.SONIC PLUS DN150 (6") | Request quotation |
| QS6P200 | Q.SONIC PLUS DN200 (8") | Request quotation |
| QS6P250 | Q.SONIC PLUS DN250 (10") | Request quotation |
| QS6P300 | Q.SONIC PLUS DN300 (12") | Request quotation |
| QS6P350 | Q.SONIC PLUS DN350 (14") | Request quotation |
| QS6P400 | Q.SONIC PLUS DN400 (16") | Request quotation |
| QS6P450 | Q.SONIC PLUS DN450 (18") | Request quotation |
| QS6P500 | Q.SONIC PLUS DN500 (20") | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Q.Sonic-plus Product Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
