Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Pilot Heater

HON 900

HON 900 electrically preheats control gas for equipment such as pneumatic pilots.

HON 900 electrically preheats control gas for equipment such as pneumatic pilots. Gas passes through a steel tube cast into an aluminum block warmed by a self-regulating heater. The unit can mount in any position and is published for non-aggressive gases, with the stated electrical supply and explosion-protection arrangement defining its installation requirements.

Models: HON 900

Features & Benefits

Maximum admissible pressure
200 bar
Supply
230 V / 50 Hz
Consumption
150 W
  • Any-position mounting

Applications

  • Control-gas preheating for pneumatic pilots

Specifications

Processing & Performance Metrics

Maximum Admissible Pressure
200 bar

Environmental Conditions

Maximum Operating Pressure
100 bar (Standard), 200 bar (Special Version) kilopascal
Maximum Temperature Range
Approx. 78 deg C (Aluminum Block at Room Temperature, 21 deg C)
Operating Voltage
230 VAC/50 Hz

Standards & Certifications

Explosion Protection
II 2 G EEx e II or de IIC T6 ... T1
Degree of Protection
IP54 (IP65 optional)
Approvals
PTB 03 ATEX 1075 X, EC prototype test PTB 03 ATEX 1075 X, Ex II 2 G EEx e II or de IIC T6 ... T1

Electrical Specifications

Power Consumption
150 W

Technical Specifications

Gas Connections
Screwed Pipe Connection (DIN 2353), Pipe Outer Diameter - 10 mm

Applications & Compatibility

Applications
Pre-heating gas to pneumatic pilots; Suitable for natural gas and non-aggressive gases

Material Specifications

Materials
Steel pipe cast into aluminum block
HON 900 — manufacturer page values
ParameterPublished value / configuration
Maximum Admissible Pressure200 bar
Maximum Operating Pressure100 bar (Standard), 200 bar (Special Version) kilopascal
Maximum Temperature RangeApprox. 78 deg C (Aluminum Block at Room Temperature, 21 deg C)
Operating Voltage230 VAC/50 Hz
Explosion ProtectionII 2 G EEx e II or de IIC T6 ... T1
Degree of ProtectionIP54 (IP65 optional)
ApprovalsPTB 03 ATEX 1075 X, EC prototype test PTB 03 ATEX 1075 X, Ex II 2 G EEx e II or de IIC T6 ... T1
Power Consumption150 W
Gas ConnectionsScrewed Pipe Connection (DIN 2353), Pipe Outer Diameter - 10 mm
ApplicationsPre-heating gas to pneumatic pilots; Suitable for natural gas and non-aggressive gases
MaterialsSteel pipe cast into aluminum block

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

6 parts

Part NumberDescriptionEnquiry
HON121SERIES 121 IN-LINE TYPE FILTERRequest quotation
HON122SERIES 122 ANGLE TYPE FILTERRequest quotation
HON214Pressure Reducing Valve HON 214Request quotation
HON580SERIES 580 WAFERCHEK NON-RETURN VALVERequest quotation
HON585SERIES 585 STREAMCHEK NON-RETURN VALVERequest quotation
HON590SERIES 590 ROLLCHEK NON-RETURN VALVERequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/pilot-heater/hon-900

Last source check: 2026-11-02

HON 900 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry