Turbine & Quantometers
QA/QAE - Quantometer
QA and QAe quantometers combine lightweight aluminum wafer bodies with mechanical or electronic totalizers.
QA and QAe quantometers combine lightweight aluminum wafer bodies with mechanical or electronic totalizers. Depending on the version, pulse outputs and optical reading are available, with an additional M-bus option on electronic models. Stainless steel versions address special industrial requirements. Temperature limits differ between QA and QAe and must be selected by version.
Models: QA, QAe
Features & Benefits
- Totalizer
- Mechanical on QA
- Rangeability
- Up to 1:20
- Flow range
- 1.6–1,600 m³/h
- Diameters
- DN 25–150
- Low-weight construction supports industrial installations
Applications
- Industrial gas measurement
Detailed capabilities
QA/QAE - Quantometer — product role
QA and QAe quantometers combine lightweight aluminum wafer bodies with mechanical or electronic totalizers. Depending on the version, pulse outputs and optical reading are available, with an additional M-bus option on electronic models. Stainless steel versions address special industrial requirements. Temperature limits differ between QA and QAe and must be selected by version.
Version-dependent readout
QA uses a mechanical totalizer, while QAe has an electronic display. Aluminum wafer bodies reduce weight, and stainless versions are offered for special industrial duties. Pulse and optical options depend on version, with electronic options including an additional M-bus output. The source identifies DVGW approval without turning every interface option into standard equipment.
Published technical distinctions
The flow range extends from 1.6 to 1,600 m³/h across DN25–DN150, with rangeability up to 1:20. Listed pressure classes are PN4, PN16 and ANSI150. QA gas temperature is -10 to 60 °C and ambient is -20 to 70 °C; QAe uses a 0–50 °C gas and ambient range, so those limits must remain separate.
Processing & Performance Metrics
- Accuracy
- ±1.5% from 20% to 100% Qmax; ±3% from 10% to 20% Qmax; ±6% below 10% Qmax
Environmental Conditions
- Temperature Range
- QA: -10 to +60 deg C; QAe: 0 to +50 deg C
- Measuring Range
- Up to 1:20
- Maximum Working Pressure
- Up to 16 bar (air/inert gases), 4 bar (flammable gases)
Technical Specifications
- Suitable Media
- Natural Gas, Air, Methane, Nitrogen, Other Non-Corrosive Gases
Standards & Certifications
- Protection Class
- QA: IP52; QAe: IP44
Applications & Compatibility
- Mounting
- Horizontal or Vertical
- Applications
- Non-Fiscal Industrial Gas Metering, In-plant Allocation Metering, Volume Input for Controls, Consumption Monitoring for Burners, Boilers, Furnaces etc.
Overview
- Models
- QA: Mechanical index, QAe: Electronic index
- Index Variants
- Mechanical (QA) or Electronic (QAe)
Mechanical & Physical Properties
- Meter Sizes
- DN 25 to DN 150
Industries / Applications & Compatibility
- Industries
- Heavy and Light Industry, Petrochemicals, Steel, Power, Minerals, Heating
Software & Interface
- Index Display
- 7-Digits (QA), LCD (QAe)
Electrical Specifications
- Flow Rate
- 1.6 to 1600 m³/h
Material Specifications
- Body Material
- Aluminum
| Parameter | Published value / configuration |
|---|---|
| Accuracy | ±1.5% from 20% to 100% Qmax; ±3% from 10% to 20% Qmax; ±6% below 10% Qmax |
| Temperature Range | QA: -10 to +60 deg C; QAe: 0 to +50 deg C |
| Measuring Range | Up to 1:20 |
| Maximum Working Pressure | Up to 16 bar (air/inert gases), 4 bar (flammable gases) |
| Suitable Media | Natural Gas, Air, Methane, Nitrogen, Other Non-Corrosive Gases |
| Protection Class | QA: IP52; QAe: IP44 |
| Mounting | Horizontal or Vertical |
| Applications | Non-Fiscal Industrial Gas Metering, In-plant Allocation Metering, Volume Input for Controls, Consumption Monitoring for Burners, Boilers, Furnaces etc. |
| Models | QA: Mechanical index, QAe: Electronic index |
| Index Variants | Mechanical (QA) or Electronic (QAe) |
| Meter Sizes | DN 25 to DN 150 |
| Industries | Heavy and Light Industry, Petrochemicals, Steel, Power, Minerals, Heating |
| Index Display | 7-Digits (QA), LCD (QAe) |
| Flow Rate | 1.6 to 1600 m³/h |
| Body Material | Aluminum |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
3 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 73021835 | SCREWING SET QA DN40 | Request quotation |
| 90049100-000002 | QUANTOMETRE 32-650 M3/H DN100 BF + MF | Request quotation |
| PG73021835 | SCREWING SET QA DN40 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
QA/QAE - Quantometer Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
