Single-Jet Meters
S150 Single-jet Water Meter
S150 is a single-jet cold-water meter with a dry register that rotates for easier reading.
S150 is a single-jet cold-water meter with a dry register that rotates for easier reading. Its magnetic drive resists external magnetic interference, and a bidirectional pulser can be added after installation. The manufacturer lists MID performance up to R160 for the stated flow variants, with size and connection length selected for the installation.
Models: S150 Single-jet Water Meter
Features & Benefits
- Sizes
- 15 and 20 mm
- Q3
- 2.5 or 4 m³/h
- Dynamic range
- Up to R160
- Cold-water temperature
- 30 °C
- Rotatable moisture-resistant register
Applications
- Water consumption and revenue metering
Detailed capabilities
S150 Single-jet Water Meter — purpose and arrangement
S150 is a single-jet cold-water meter with a dry register that rotates for easier reading. Its magnetic drive resists external magnetic interference, and a bidirectional pulser can be added after installation. The manufacturer lists MID performance up to R160 for the stated flow variants, with size and connection length selected for the installation.
Dry register and remote-reading preparation
S150 has a moisture-resistant register that rotates through360degrees, a removable lid and a five-figure cubic-meter display. The magnetic drive is described as resistant to external interference. A bidirectional pulser may be added after installation, connecting the existing meter with remote reading rather than requiring an integrated-radio version at initial deployment.
Size and performance distinctions
The meter is offered in fifteen and twenty millimeters with Q3 values2.5 or4m³/h and dynamic range up toR160. The cold-water limit is thirty degrees Celsius, with ISO lengths and threads available. The source references MID and EN14154; these details stay with S150 rather than the higher-ratio S220.
Performance
- Accuracy
- High accuracy over lifetime
- Pressure Ratings
- PN 16
Operating Conditions
- Water Temperature
- Up to 50 deg C (60 deg C peak tolerated)
- Protection Class
- IP68 (high moisture/dust protection)
Control & Operation
- Resolution
- 0.05 liter
Functional Features
- Register Type
- Dry dial, 350 deg rotating register
- Register Display
- 5 number wheels for m³
Interfaces
- Pulse Value
- 1 liter per pulse
Outputs
- Pulse Output
- Pre-equipped for bidirectional inductive pulse
General Overview
- Meter Types
- Single‑jet mechanical water meter (velocity type)
- Installation Orientation
- Horizontal (R125, R160)/Vertical (R50)
- Applications
- Domestic water metering
Dimensions & Sizes
- Meter Sizes
- 13/15 mm and 20 mm
Measurement
- Flow Rate
- Minimum Flowrate (Q1): 15.6 to 32 l/h; Overload Flowrate (Q4): 3.125 to 5 m³/h; Permanent Flowrate (Q3) - 2.5 m³/h (DN15), 4 m³/h (DN20); Starting Flow: 3.5 to 7 l/h; Transitional Flowrate (Q2): 25 to 51.2 l/h
Display
- Display Range
- 99,999 m³
Physical
- Dimensions
- 100 to 190 mm Length x ~80 mm (closed)/155 mm (open) Height x ~100 mm Width
Construction
- Body Material
- Brass body
Safety & Compliance
- Approvals
- ISO 4064 compliant, MID Directive certified, Approved for potable water contact
| Parameter | Published value / configuration |
|---|---|
| Accuracy | High accuracy over lifetime |
| Pressure Ratings | PN 16 |
| Water Temperature | Up to 50 deg C (60 deg C peak tolerated) |
| Protection Class | IP68 (high moisture/dust protection) |
| Resolution | 0.05 liter |
| Register Type | Dry dial, 350 deg rotating register |
| Register Display | 5 number wheels for m³ |
| Pulse Value | 1 liter per pulse |
| Pulse Output | Pre-equipped for bidirectional inductive pulse |
| Meter Types | Single‑jet mechanical water meter (velocity type) |
| Installation Orientation | Horizontal (R125, R160)/Vertical (R50) |
| Applications | Domestic water metering |
| Meter Sizes | 13/15 mm and 20 mm |
| Flow Rate | Minimum Flowrate (Q1): 15.6 to 32 l/h; Overload Flowrate (Q4): 3.125 to 5 m³/h; Permanent Flowrate (Q3) - 2.5 m³/h (DN15), 4 m³/h (DN20); Starting Flow: 3.5 to 7 l/h; Transitional Flowrate (Q2): 25 to 51.2 l/h |
| Display Range | 99,999 m³ |
| Dimensions | 100 to 190 mm Length x ~80 mm (closed)/155 mm (open) Height x ~100 mm Width |
| Body Material | Brass body |
| Approvals | ISO 4064 compliant, MID Directive certified, Approved for potable water contact |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| LA0691755 | Hydraul. compl.STM EVZ-D 5 R3/4"Lgth.130 | Request quotation |
| QQ927080 | S150 2,5 125 3/4" 115 | Request quotation |
| QQ927190 | S150 2,5 125 3/4"N 100 | Request quotation |
| QQ927210 | S150 2,5 125 7/8" 115 | Request quotation |
| QQ927230 | S150 2,5 125 3/4" 190 | Request quotation |
| QQ927240 | S150 4 125 1" 115 | Request quotation |
| QQ927250 | S150 4 125 1" 190 | Request quotation |
| QQ927920 | S150 2,5 160 3/4" 115 | Request quotation |
| QQ928000 | S150P 2,5 125 3/4" 115 | Request quotation |
| QQ928030 | S150P 2,5 125 7/8" 115 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
S150 product image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
