Static Meters
Q4000B
Q4000B measures bulk cold potable water electromagnetically and uses a replaceable battery pack.
Q4000B measures bulk cold potable water electromagnetically and uses a replaceable battery pack. Field battery replacement extends its usable life, including in hot climates that place greater demand on batteries. The IP68 stainless construction and low-loss design support commercial billing and system monitoring, with actual size and flow configuration selected for the installation.
Models: Q4000B
Features & Benefits
- Sizes
- 50–300 mm
- Flow range
- 0.16–1,250 m³/h
- Battery
- Field-replaceable pack
- Battery replacement extends meter service
Applications
- Commercial and industrial water billing and distribution monitoring
Detailed capabilities
Q4000B — purpose and arrangement
Q4000B measures bulk cold potable water electromagnetically and uses a replaceable battery pack. Field battery replacement extends its usable life, including in hot climates that place greater demand on batteries. The IP68 stainless construction and low-loss design support commercial billing and system monitoring, with actual size and flow configuration selected for the installation.
Replaceable battery arrangement
Q4000B retains the electromagnetic, low-loss measurement approach but makes its battery pack replaceable in the field. The source links this to extended meter service in hot climates where batteries are more heavily loaded. The claimed extension beyond ten years depends on replacement and operating conditions, rather than a fixed guaranteed lifetime for every battery pack.
Housing, sampling and deployment
The IP68 stainless arrangement is lightweight and uses a continuously displayed LCD. Half-second sampling supports measurement, while installation is described as fit-and-go. Published sizes extend from fifty to three hundred millimeters with a family range of0.16–1,250m³/h, for bulk cold potable water billing and network monitoring.
Safety & Compliance
- Approvals
- CEN PR14154, ISO 4064, OIML R49
Protection
- Waterproof Rating
- IP68
Performance
- Sampling Rate
- 0.5 seconds
- Fluid Conductivity
- ≥ 50 µS/cm
General Overview
- Product Type
- Electromagnetic water meter (Q4000B)
Power
- Power Source
- Lithium battery packs
- Extended Lifecycle
- Up to ~20 years with battery replacement
- Battery Lifetime
- ~10 years (DN50–100), ~7 years (DN125–150), ~5 years (DN200–300)
Operating Conditions
- Operating Temperature Range
- -10 to +55 deg C
Pressure Ratings
- Operating Pressure Range
- 16 bar
Sizes
- Nominal Sizes
- 50 mm to 300 mm
Measurement
- Measurement Principle
- Electromagnetic flow measurement
Flow
- Maximum Registration
- Up to 9,999,999.99 m³
Installation
- Flange Compatibility
- BS4504 PN10/PN16, DIN2533, ASA150
- Design Type
- Flangeless (DN50–200), Flanged (DN250–300)
Control & Interface
- Display Type
- 6-digit (DN50–100), 7-digit (DN125–300)
| Parameter | Published value / configuration |
|---|---|
| Approvals | CEN PR14154, ISO 4064, OIML R49 |
| Waterproof Rating | IP68 |
| Sampling Rate | 0.5 seconds |
| Fluid Conductivity | ≥ 50 µS/cm |
| Product Type | Electromagnetic water meter (Q4000B) |
| Power Source | Lithium battery packs |
| Extended Lifecycle | Up to ~20 years with battery replacement |
| Battery Lifetime | ~10 years (DN50–100), ~7 years (DN125–150), ~5 years (DN200–300) |
| Operating Temperature Range | -10 to +55 deg C |
| Operating Pressure Range | 16 bar |
| Nominal Sizes | 50 mm to 300 mm |
| Measurement Principle | Electromagnetic flow measurement |
| Maximum Registration | Up to 9,999,999.99 m³ |
| Flange Compatibility | BS4504 PN10/PN16, DIN2533, ASA150 |
| Design Type | Flangeless (DN50–200), Flanged (DN250–300) |
| Display Type | 6-digit (DN50–100), 7-digit (DN125–300) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 40410-00 | METER, 50MM Q4000B | Request quotation |
| 40412-00 | METER, 80MM Q4000B | Request quotation |
| 40413-00 | METER, 100MM Q4000B | Request quotation |
| 40415-00 | METER, 150MM Q4000B | Request quotation |
| 40416-00 | METER, 200MM Q4000B | Request quotation |
| 40430-00 | METER, 50MM Q4000B | Request quotation |
| 40431-00 | METER, 65MM Q4000B | Request quotation |
| 40432-00 | METER, 80MM Q4000B | Request quotation |
| 40433-00 | METER, 100MM Q4000B | Request quotation |
| 40435-00 | METER, 150MM Q4000B | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Q4000B product image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
