Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Irrigation Meters

R1200 Paddle Wheel Irrigation Meter

R1200 uses a paddle-wheel arrangement that leaves the water passage open for suspended solids.

R1200 uses a paddle-wheel arrangement that leaves the water passage open for suspended solids. A removable mechanism simplifies service, while its dry register and wear-resistant materials suit agricultural installations. Horizontal and vertical orientations are permitted, and an optional reed pulser provides output, with temperature and pressure selected within the published operating limits.

Models: R1200 Paddle Wheel Irrigation Meter

Features & Benefits

Sizes
DN50–200
Register
IP68 dry dial
PN
10 or 16 bar
Temperature
30 °C maximum operating, operation guaranteed to 50 °C
  • Unrestricted flow reduces jamming by suspended material

Applications

  • Agricultural irrigation measurement

Specifications

General Overview

Applications
Irrigation, raw water, untreated water, wastewater, borehole, agriculture
Nominal Sizes
DN50 to DN200
Meter Types
Paddle wheel irrigation water meter

Classes

Temperature Class
T30

Flow & Performance

Starting Flow Rate
125 to 1800 l/h (size dependent)

Mechanical & Physical

Rotor Position
Outside main flow stream
Lens Material
Tempered mineral glass

Functional Features

Register Type
Hermetically sealed dry dial

Protection & Environmental

Register Protection
IP68

Installation & Configuration

Orientation
Horizontal and Vertical

Pressure Ratings

Nominal Pressure
10/16 bar

Operating Conditions

Maximum Operating Temperature
30 deg C (up to 50 deg C allowed)

Construction

Housing Material
Epoxy resin-coated cast iron

Physical

Dimensions
200 to 350 mm L x 250 to 378 mm H x 165 to 340 mm Diameter

Safety & Compliance

Approvals
Directive 2004/22/EC, MID Ratio R40 (Q3/Q1)
R1200 Paddle Wheel Irrigation Meter — manufacturer page values
ParameterPublished value / configuration
ApplicationsIrrigation, raw water, untreated water, wastewater, borehole, agriculture
Nominal SizesDN50 to DN200
Meter TypesPaddle wheel irrigation water meter
Temperature ClassT30
Starting Flow Rate125 to 1800 l/h (size dependent)
Rotor PositionOutside main flow stream
Lens MaterialTempered mineral glass
Register TypeHermetically sealed dry dial
Register ProtectionIP68
OrientationHorizontal and Vertical
Nominal Pressure10/16 bar
Maximum Operating Temperature30 deg C (up to 50 deg C allowed)
Housing MaterialEpoxy resin-coated cast iron
Dimensions200 to 350 mm L x 250 to 378 mm H x 165 to 340 mm Diameter
ApprovalsDirective 2004/22/EC, MID Ratio R40 (Q3/Q1)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

R1200 Paddle Wheel Irrigation MeterRequest quotation ›

Published part numbers

10 parts

Part NumberDescriptionEnquiry
GMWI125COMPTEUR D'IRRIGATION À HÉLICE DN125Request quotation
GMWI150COMPTEUR D'IRRIGATION À HÉLICE DN150Request quotation
GMWI200COMPTEUR D'IRRIGATION À HÉLICE DN200Request quotation
GMWI50COMPTEUR D'IRRIGATION À HÉLICE DN50Request quotation
GMWI65COMPTEUR D'IRRIGATION À HÉLICE DN65Request quotation
GMWI80COMPTEUR D'IRRIGATION À HÉLICE DN80Request quotation
QQC14041R1200 40 40 050 200 N P2Request quotation
QQC14045R1200 63 40 065 200 N P2Request quotation
QQC14050R1200 63 40 080 225 N P2Request quotation
QQC14055R1200 100 40 100 250 N P2Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/utilities/water/commercial-and-industrial/irrigation-meters/r1200-paddle-wheel-irrigation-meter

Last source check: 2026-11-02

R1200 product image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry