Couplings
Repair Couplings
Permasert Repair Couplings replace a damaged section of polyethylene gas pipe after it is located and cut out.
Permasert Repair Couplings replace a damaged section of polyethylene gas pipe after it is located and cut out. The mechanical arrangement avoids fusion equipment and limits excavation compared with the described alternatives. The correct coupling size and repair procedure remain dependent on the damaged pipe and the applicable manufacturer's installation instructions.
Features & Benefits
- Method
- Cut out damaged section and install mechanical repair coupling
- Avoids fusion equipment and reduces repair effort
Applications
- Polyethylene gas pipe repair
General Overview
- Applications
- Repair of damaged polyethylene (PE) water piping
- Product Type
- Mechanical Repair Coupling
- Installation Method
- Stab‑type mechanical coupling
Product Range
- Sizes
- 3/4 in, 1 in CTS/IPS
Configuration
- SDR Compatibility
- SDR 9, SDR 11
Performance
- Pressure Ratings
- Rated to PE pipe design pressure up to 200 psig (13.8 bar)
Construction
- Design Type
- One‑piece construction
- Construction Materials
- Stainless Steel (400 Series) Collet Support Ring, Acetal (POM) Gripping Collet, Polyethylene (PE) Thrust Washer, EPDM O-Rings, Polysulfone Insert Stiffener
- Body Material
- HDPE (PE3408/PE4710), NSF and PPI listed
Safety & Compliance
- Approvals
- ASTM D1598, 580 psi at 80 deg C, no failures >1000 hrs, NSF listed (Standard 61), ASTM D1599, ductile failure
| Parameter | Published value / configuration |
|---|---|
| Applications | Repair of damaged polyethylene (PE) water piping |
| Product Type | Mechanical Repair Coupling |
| Installation Method | Stab‑type mechanical coupling |
| Sizes | 3/4 in, 1 in CTS/IPS |
| SDR Compatibility | SDR 9, SDR 11 |
| Pressure Ratings | Rated to PE pipe design pressure up to 200 psig (13.8 bar) |
| Design Type | One‑piece construction |
| Construction Materials | Stainless Steel (400 Series) Collet Support Ring, Acetal (POM) Gripping Collet, Polyethylene (PE) Thrust Washer, EPDM O-Rings, Polysulfone Insert Stiffener |
| Body Material | HDPE (PE3408/PE4710), NSF and PPI listed |
| Approvals | ASTM D1598, 580 psi at 80 deg C, no failures >1000 hrs, NSF listed (Standard 61), ASTM D1599, ductile failure |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 101309LGGN | CPLG 20mm-3.0mm x 3/4 CTS-.090 PE4710 | Request quotation |
| 101312LGGN | CPLG 20mm-3.0mm x 1/2 CTS-.090 PE4710 | Request quotation |
| 101350LGGN | CPLG 20mm-3.0mm PE4710 | Request quotation |
| 101500LGGN | CPLG 25mm-2.3mm x 3/4 CTS-.090 PE4710 | Request quotation |
| 56010301PBI | HALF CPLG 1 1/4CTS-090 PE4710 | Request quotation |
| 56010303PBI | HALF CPLG 1 1/4CTS-121 PE4710 MLDD WASH | Request quotation |
| 56010312PBI | HALF CPLG BE 1 1/4CTS-090 PE4710 | Request quotation |
| 56010313PBI | HALF CPLG BE 1 1/4CTS-121 PE4710 | Request quotation |
| 71172013 | SVHD 1 1/4 IPS X 1 IPS-SDR 11.0 X 2 | Request quotation |
| 71172013GN | SVHD 1 1/4 IPS X 1 IPS-SDR 11.0 X 2 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Repair Couplings product image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
