Industrial Low Pressure Regulators
J48 2 1/2 to 6
The larger J48 range regulates low-pressure industrial, commercial and distribution gas supplies with full lock-up.
The larger J48 range regulates low-pressure industrial, commercial and distribution gas supplies with full lock-up. It permits horizontal or vertical mounting and is identified for natural, LPG and manufactured gases. Maximum outlet pressure changes between the 2½–3-inch and 4–6-inch versions, so size selection also determines the applicable pressure limit.
Models: J48 2 1/2 to 6
Features & Benefits
- Outlet maximum
- 150 mbar for 2½–3 in, 345 mbar for 4–6 in
- Temperature
- -20 to 70 °C
- Full lock-up and flexible orientation
Applications
- Industrial, commercial and distribution low-pressure gas service
General Overview
- Applications
- Domestic, Commercial, and Industrial Gas Pressure Control
- Models
- J48 Series (large-size range)
- Device Type
- Low-pressure gas regulator
Media
- Supported Gases
- Natural Gas, LPG, Manufactured Gases
Construction
- Spring Material
- Carbon Steel
- Diaphragm Material
- Fabric-reinforced nitrile (Buna)
- Body Material
- Aluminum Alloy
Performance
- Outlet Pressure Range
- High Pressure Version - Up to 40 in wc; Low Pressure Version - Up to 30 in wc
- Inlet Pressure Range
- 5 psig
Connection Options
- Connection Type
- Threaded (NPT), Flanged (ANSI 125)
- Connection Size
- 2-1/2 in, 3 in (larger models up to 6 in available)
Safety & Compliance
- Approvals
- AGA/CGA approvals (ANSI Z21.18 series), ISO9001 compliant manufacturing
| Parameter | Published value / configuration |
|---|---|
| Applications | Domestic, Commercial, and Industrial Gas Pressure Control |
| Models | J48 Series (large-size range) |
| Device Type | Low-pressure gas regulator |
| Supported Gases | Natural Gas, LPG, Manufactured Gases |
| Spring Material | Carbon Steel |
| Diaphragm Material | Fabric-reinforced nitrile (Buna) |
| Body Material | Aluminum Alloy |
| Outlet Pressure Range | High Pressure Version - Up to 40 in wc; Low Pressure Version - Up to 30 in wc |
| Inlet Pressure Range | 5 psig |
| Connection Type | Threaded (NPT), Flanged (ANSI 125) |
| Connection Size | 2-1/2 in, 3 in (larger models up to 6 in available) |
| Approvals | AGA/CGA approvals (ANSI Z21.18 series), ISO9001 compliant manufacturing |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 4810RA2 | J48,REG,RC21/2,LP,12.5-25 | Request quotation |
| 4811AC2H | J90,ANGMKII,80,UNIV,LP,HC,IGEM U65/U100 | Request quotation |
| 4811RC21A | J48,REG,80mmNP16,LP,12.5-25mb,T/N NOT NG | Request quotation |
| 4812BC21A | J48B,REG,100mmNP16,12.5-25S21,T/N NOT NG | Request quotation |
| 4812RC2 | REGULATOR J48, 4" | Request quotation |
| 4814BC21A | J48B,REG,150mmNP16,12.5-25S21,T/N NOT NG | Request quotation |
| 4814RC2 | J48,REG,150mmNP16,LP,12.5-25mb | Request quotation |
| 78069P013 | VENT RESTRICTOR J48VRF | Request quotation |
| 83575206 | Regulator J48, J120 1/2", 3/4" And 1" | Request quotation |
| CK4806-01 | C/KIT,J48K PRV TO J48KC,3 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
J48 2 1/2" to 6" product image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
