Oil Accessories
Oil Flow Meters FMO
FMO low-capacity meters measure No.
FMO low-capacity meters measure No. 2 fuel oil only. The manufacturer recommends a bypass loop to allow maintenance and reduce stress on the meter body. Published pressure capability is qualified at 70°F, and accuracy is stated as ±4% of full scale rather than a percentage of the instantaneous reading.
Features & Benefits
- Flow Coefficient (Cv/Kvs)
- High Capacity: 2.7
- Pressure Ratings
- High Capacity: 800 psi at 400 deg F|Low Capacity: up to 125 psi at 70 deg F
- Flow Meter Type
- Low Capacity, High Capacity
- Repeatability
- High Capacity: ±1%
- Bypass mounting permits meter maintenance with less pipe stress.
Applications
- No. 2 fuel-oil flow measurement
Performance, Flow & Capacity
- Flow Coefficient (Cv/Kvs)
- High Capacity: 2.7
Pressure Specifications
- Pressure Ratings
- High Capacity: 800 psi at 400 deg F; Low Capacity: up to 125 psi at 70 deg F
Processing & Performance Metrics
- Flow Meter Type
- Low Capacity, High Capacity
Measurement, Accuracy & Sensing
- Repeatability
- High Capacity: ±1%
| Parameter | Published value / configuration |
|---|---|
| Flow Coefficient (Cv/Kvs) | High Capacity: 2.7 |
| Pressure Ratings | High Capacity: 800 psi at 400 deg F; Low Capacity: up to 125 psi at 70 deg F |
| Flow Meter Type | Low Capacity, High Capacity |
| Repeatability | High Capacity: ±1% |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Manufacturer sources
Last source check: 2026-11-02
Oil Flow Meters FMO · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
