Single Burners
Winnox
Winnox combines a short swirled flame, ratio regulator and integral air butterfly for controlled-ratio air heating.
Winnox combines a short swirled flame, ratio regulator and integral air butterfly for controlled-ratio air heating. Packaged blowers, multiple thread choices and alloy or refractory firing tubes support different installations. Direct-spark ignition and natural-gas, propane or butane capability are published, with nozzle mixing targeting low emissions across the gas turndown range.
Features & Benefits
- Control Motor Specifications
- ≤ 2 rpm, ≥ 25 in-lb torque, 90 deg stroke, Modulating control
- Combustion Air Requirements
- Fresh (20.9% O₂), clean, temperature ≤ 250 deg F
- Ignition Transformer Specs
- 6000 to 8000 VAC, ≥ 0.02 A, Full wave output
- Gas Inlet Pressure Control
- Controlled pressure to ratio regulator inlet required
- Burner Orientation Options
- Vertical Down, Vertical Up, Horizontal
- Process Temperature Range
- 1800 deg F (982 deg C)
- Multi-Fuel Capability
- Yes (gaseous fuels)
- Combustion Air Supply
- Integral packaged combustion air blower or remote blower option
- Air/Gas Ratio Control
- Ratio regulator with impulse line; 40-70% excess air at high fire
- Pipe Connection Type
- NPT or BSP Threaded
- Combustion Principle
- Nozzle‑mix burner with intense air/fuel mixing
- Heat Capacity Range
- 550 kBTU/h to 12,500 kBTU/h (HHV)
- Flame Monitoring
- Must maintain spark long enough for ignition; avoid low-sensitivity relays
- Turndown Ratio
- 8:1
- Combustor Tube
- Low‑temperature alloy tube or high‑temperature alloy tube
- Minimum Input
- As low as 75 kBTU/h, model‑dependent (On‑Ratio)
- Ignition Type
- Direct Spark Ignition; low fire start only
- Burner Family
- WINNOX®
- Flame Sensor
- Flame rod (factory mounted), UV scanner (ordered separately)
- Burner Type
- Nozzle‑mix, low‑emissions air‑heating burner
- Fuel Type
- Natural Gas, Propane, Butane (model‑dependent)
- Approvals
- Complies with Eurasian Customs Union technical specifications
- The packaged blower simplifies installation.
Applications
- Air heating
- Ovens
Detailed capabilities
Short-flame ratio-controlled package
Winnox rapidly mixes fuel and air into an intense swirled flame contained within the firing tube. The ratio regulator and integral butterfly coordinate the mixture across the gas operating range, with direct-spark ignition. Natural gas, propane and butane are listed. Low-emission performance is associated with this mixing arrangement rather than a separately stated universal emissions guarantee.
Mechanical and global configuration choices
A packaged blower is offered for the electrical frequency of the installation. Alloy firing tubes or a refractory combustor address different thermal demands. Modular choices include NPT or BSP gas interfaces, letting the piping arrangement follow the site. The page describes these as configuration choices; they should not be interpreted as every tube, electrical supply and connection being included in a single package.
Features and benefits
- The packaged blower simplifies installation.
Published application context
- Air heating
- Ovens
Overview
- Models
- WX0050 to WX0850
- Burner Type
- Nozzle‑mix, low‑emissions air‑heating burner
Motor Specifications
- Control Motor Specifications
- ≤ 2 rpm, ≥ 25 in-lb torque, 90 deg stroke, Modulating control
Air & Combustion Air Specifications
- Combustion Air Requirements
- Fresh (20.9% O₂), clean, temperature ≤ 250 deg F
- Combustion Air Supply
- Integral packaged combustion air blower or remote blower option
- Air/Gas Ratio Control
- Ratio regulator with impulse line; 40-70% excess air at high fire
Ignition, Flame & Supervision Specifications
- Ignition Transformer Specs
- 6000 to 8000 VAC, ≥ 0.02 A, Full wave output
- Flame Monitoring
- Must maintain spark long enough for ignition; avoid low-sensitivity relays
- Ignition Type
- Direct Spark Ignition; low fire start only
- Flame Sensor
- Flame rod (factory mounted), UV scanner (ordered separately)
Pressure Specifications
- Gas Inlet Pressure Control
- Controlled pressure to ratio regulator inlet required
Combustion, Fuel & Mixing Sub‑Systems
- Burner Orientation Options
- Vertical Down, Vertical Up, Horizontal
Operating/Process Temperature Ranges
- Process Temperature Range
- 1800 deg F (982 deg C)
Fuel, Gas & Media Specifications
- Multi-Fuel Capability
- Yes (gaseous fuels)
- Fuel Type
- Natural Gas, Propane, Butane (model‑dependent)
Connections & Interfaces
- Pipe Connection Type
- NPT or BSP Threaded
Combustion, Mixing & Fuel Dynamics
- Combustion Principle
- Nozzle‑mix burner with intense air/fuel mixing
Performance Specifications
- Heat Capacity Range
- 550 kBTU/h to 12,500 kBTU/h (HHV)
Performance, Flow & Capacity
- Turndown Ratio
- 8:1
Combustion Design & Characteristics
- Combustor Tube
- Low‑temperature alloy tube or high‑temperature alloy tube
Inputs, Outputs & Interface Signals
- Minimum Input
- As low as 75 kBTU/h, model‑dependent (On‑Ratio)
Product Design & Configuration
- Burner Family
- WINNOX®
Applications & Compatibility
- Applications
- Air heating, ovens, dry‑off and curing ovens, incinerators, indirect air heating, textile drying, food processing/baking, annealing, aluminium homogenizing
Standards & Certifications
- Approvals
- Complies with Eurasian Customs Union technical specifications
| Parameter | Published value / configuration |
|---|---|
| Models | WX0050 to WX0850 |
| Burner Type | Nozzle‑mix, low‑emissions air‑heating burner |
| Control Motor Specifications | ≤ 2 rpm, ≥ 25 in-lb torque, 90 deg stroke, Modulating control |
| Combustion Air Requirements | Fresh (20.9% O₂), clean, temperature ≤ 250 deg F |
| Combustion Air Supply | Integral packaged combustion air blower or remote blower option |
| Air/Gas Ratio Control | Ratio regulator with impulse line; 40-70% excess air at high fire |
| Ignition Transformer Specs | 6000 to 8000 VAC, ≥ 0.02 A, Full wave output |
| Flame Monitoring | Must maintain spark long enough for ignition; avoid low-sensitivity relays |
| Ignition Type | Direct Spark Ignition; low fire start only |
| Flame Sensor | Flame rod (factory mounted), UV scanner (ordered separately) |
| Gas Inlet Pressure Control | Controlled pressure to ratio regulator inlet required |
| Burner Orientation Options | Vertical Down, Vertical Up, Horizontal |
| Process Temperature Range | 1800 deg F (982 deg C) |
| Multi-Fuel Capability | Yes (gaseous fuels) |
| Fuel Type | Natural Gas, Propane, Butane (model‑dependent) |
| Pipe Connection Type | NPT or BSP Threaded |
| Combustion Principle | Nozzle‑mix burner with intense air/fuel mixing |
| Heat Capacity Range | 550 kBTU/h to 12,500 kBTU/h (HHV) |
| Turndown Ratio | 8:1 |
| Combustor Tube | Low‑temperature alloy tube or high‑temperature alloy tube |
| Minimum Input | As low as 75 kBTU/h, model‑dependent (On‑Ratio) |
| Burner Family | WINNOX® |
| Applications | Air heating, ovens, dry‑off and curing ovens, incinerators, indirect air heating, textile drying, food processing/baking, annealing, aluminium homogenizing |
| Approvals | Complies with Eurasian Customs Union technical specifications |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 10006681 | CMBSTR,WX0850,SHRT,HT ALLY,RFRCT PLUG | Request quotation |
| 10006681-1 | CMBSTR,WX0850,HT ALLY,RFRCT PLUG | Request quotation |
| 10006681-2 | CMBSTR,WX0850,LT ALLY,RFRCT PLUG | Request quotation |
| 10007381 | CMBSTR,WX0300,HT ALLY,RFRCT PLUG | Request quotation |
| 10007381-1 | CMBSTR,WX0300,LT ALLY,RFRCT PLUG | Request quotation |
| 10007611-1 | CMBSTR,WX0100,LT ALLY,RFRCT PLUG | Request quotation |
| 10007612-1 | CMBSTR,WX0200,LT ALLY,RFRCT PLUG | Request quotation |
| 10007613 | CMBSTR,WX0400,HT ALLY,RFRCT PLUG | Request quotation |
| 10007613-1 | CMBSTR,WX0400,LT ALLY,RFRCT PLUG | Request quotation |
| 10007614 | CMBSTR,WX0500,HT ALLY,RFRCT PLUG | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Winnox Product Image · Manufacturer ownership retained; republication licence not independently confirmed
Winnox Flame Image · Manufacturer ownership retained; republication licence not independently confirmed
Winnox Product Diagram · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
