Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Single Burners

VALUPAK®-II

VALUPAK-II is an all-metal packaged process-air burner with four size groups.

VALUPAK-II is an all-metal packaged process-air burner with four size groups. It supports UV or flame-rod supervision and includes a pilot-connection option. Switching between natural gas and propane provides fuel flexibility, while low gas-pressure requirements and multi-voltage/frequency blower choices support installation; the published capacity range uses HHV.

Features & Benefits

Turndown Ratio
High turndown (up to approximately 70:1 depending on model)
Spark Ignitor Connection
1/2 in NPT
Protection Class
IP54
Operating Pressure Range
Balanced pressure (0 mbar duct pressure)
Motor Voltage
230 to 480 V
Motor Type
Single‑phase (selected models), Triphase
Installation Orientation
Any orientation
Ignition Type
Direct Spark Ignition
Heat Capacity Range
2 to 950 kW (LHV, size dependent)
Gas Inlet Connection
1/2 to 1 in NPT (model dependent)
Fuel Type
Natural Gas (C1), LPG/Propane (C3)
Frequency
50/60 Hz
Emissions
CO Emissions (NG) -< 25 to 50 mg/Nm³ at 17% O₂ (model dependent)|NOx Emissions (NG) - Typically 25 to 40 mg/Nm³ at 17% O₂
Construction
All‑metal
Combustion Type
Stable, clean combustion
Burner Type
Nozzle-mixing burner with packaged air blower
Blower Types
UHC102, UHC122, UHC142, UHC182, UHC202, UMI300, UMI390
Approvals
Eurasian Customs Union
  • Gas/propane switching supports changes in fuel availability or cost.

Applications

  • Process-air heating

Detailed capabilities

Fuel switching and blower selection

VALUPAK-II permits switching between natural gas and propane, with UV-scanner or flame-rod supervision and an available pilot connection. Four sizes cover the published HHV capacity range. All-metal construction, low gas-pressure demand and blower voltage/frequency choices adapt installation. Better CO control is a comparison with the legacy offering; it does not establish a single emissions value at every firing rate.

Manufacturer reference ↗

Features and benefits

  • Gas/propane switching supports changes in fuel availability or cost.

Manufacturer reference ↗

Published application context

  • Process-air heating

Manufacturer reference ↗

Specifications

Applications & Compatibility

Applications
Process Air Heating, Textile Machines, Printing Machines, Dryers

Performance, Flow & Capacity

Turndown Ratio
High turndown (up to approximately 70:1 depending on model)

Connections & Interfaces

Spark Ignitor Connection
1/2 in NPT
Gas Inlet Connection
1/2 to 1 in NPT (model dependent)

Safety, Protection & Reliability

Protection Class
IP54

Pressure Specifications

Operating Pressure Range
Balanced pressure (0 mbar duct pressure)

Electrical Specifications

Motor Voltage
230 to 480 V
Frequency
50/60 Hz

Motor Specifications

Motor Type
Single‑phase (selected models), Triphase

Installation & Mounting Specifications

Installation Orientation
Any orientation

Ignition, Flame & Supervision Specifications

Ignition Type
Direct Spark Ignition

Performance Specifications

Heat Capacity Range
2 to 950 kW (LHV, size dependent)

Fuel, Gas & Media Specifications

Fuel Type
Natural Gas (C1), LPG/Propane (C3)

Processing & Performance Metrics

Emissions
CO Emissions (NG) -< 25 to 50 mg/Nm³ at 17% O₂ (model dependent); NOx Emissions (NG) - Typically 25 to 40 mg/Nm³ at 17% O₂

Product Overview & Classification

Construction
All‑metal

Combustion Design & Characteristics

Combustion Type
Stable, clean combustion

Overview

Burner Type
Nozzle-mixing burner with packaged air blower

Combustion Air, Blower & Emissions Specifications

Blower Types
UHC102, UHC122, UHC142, UHC182, UHC202, UMI300, UMI390

Standards & Certifications

Approvals
Eurasian Customs Union
VALUPAK®-II — manufacturer page values
ParameterPublished value / configuration
ApplicationsProcess Air Heating, Textile Machines, Printing Machines, Dryers
Turndown RatioHigh turndown (up to approximately 70:1 depending on model)
Spark Ignitor Connection1/2 in NPT
Gas Inlet Connection1/2 to 1 in NPT (model dependent)
Protection ClassIP54
Operating Pressure RangeBalanced pressure (0 mbar duct pressure)
Motor Voltage230 to 480 V
Frequency50/60 Hz
Motor TypeSingle‑phase (selected models), Triphase
Installation OrientationAny orientation
Ignition TypeDirect Spark Ignition
Heat Capacity Range2 to 950 kW (LHV, size dependent)
Fuel TypeNatural Gas (C1), LPG/Propane (C3)
EmissionsCO Emissions (NG) -< 25 to 50 mg/Nm³ at 17% O₂ (model dependent); NOx Emissions (NG) - Typically 25 to 40 mg/Nm³ at 17% O₂
ConstructionAll‑metal
Combustion TypeStable, clean combustion
Burner TypeNozzle-mixing burner with packaged air blower
Blower TypesUHC102, UHC122, UHC142, UHC182, UHC202, UMI300, UMI390
ApprovalsEurasian Customs Union

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
306923VP II-150 Textile Package B.Request quotation
307149MIXING CONE VALUPAK II-60Request quotation
307152VALUPAK II-60-UHC102-NGRequest quotation
307153VALUPAK II-60-UHC122-NG+LPGRequest quotation
307154VALUPAK II-60-UMI300-NG+LPGRequest quotation
307155VALUPAK II-60-UHC102-LPGRequest quotation
307911VAL II-150 EB & 150mm SLVRequest quotation
307912VALUPAK II-300 EBRequest quotation
307913VALUPAK II-600 EBRequest quotation
307914VALUPAK II-900 EBRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/single-burners/valupak-ii

Last source check: 2026-11-02

VALUPAK®-II Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry