Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Single Burners

OVENPAK® 500

OVENPAK 500 supports clean gas, light oil or combined firing, providing standby and alternate-fuel options for industrial process heating.

OVENPAK 500 supports clean gas, light oil or combined firing, providing standby and alternate-fuel options for industrial process heating. Gas-only versions can convert to combination service. Compressed air atomizes the oil, while compact construction and low blower demand support installation and operation in the listed oven and dryer applications.

Features & Benefits

Combustion Chamber Pressure Range
Up to +1″ WC (standard); higher with EB versions
Compressed Air Requirement
~60 to 70 psig, model‑dependent (Oil)
Oil Pressure Requirement
~22 to 72 psig, size‑dependent
Air/Fuel Ratio Control
Internally linked gas and air valves (standard versions)
Combustion Air Supply
Integral combustion air blower or external blower (EB versions)
Combustion Principle
Nozzle‑mixing burner with patented mixing cone
Turndown Capability
Minimums dependent on fuel and configuration|Wide turndown
Suction Capability
Up to -5 in WC
Installation Type
Through oven wall or insulated air duct
Flame Supervision
UV Scanner required for oil firing; UV or flame rod for gas‑only versions
Maximum Capacity
Up to 5 MMBtu/h (standard) (60 Hz), Up to ~10.0 MMBtu/h (EBC‑6)
Pilot Operation
Interrupted pilot required
Operating Modes
Fires into passing air streams
Burner Variant
500‑G (gas only), 500‑SP (combination gas/oil)
Ignition Type
Spark‑ignited gas pilot
Burner Series
Model 500
Burner Family
OVENPAK®
Construction
Heavy‑duty industrial construction with steel body and stainless components
Burner Type
Direct‑fired industrial burner
Fuel Type
Gas - Natural Gas (standard), Propane supported|Liquid - #2 Fuel Oil (500‑SP only)
  • Alternate and simultaneous fuel capability improve fuel flexibility.

Applications

  • Ovens and dryers
  • Paint finishing
  • Grain drying
  • Paper and textile machines
  • Coffee roasting
  • Food baking
  • Fume incineration

Specifications

Pressure Specifications

Combustion Chamber Pressure Range
Up to +1″ WC (standard); higher with EB versions
Oil Pressure Requirement
~22 to 72 psig, size‑dependent

Air & Combustion Air Specifications

Compressed Air Requirement
~60 to 70 psig, model‑dependent (Oil)
Air/Fuel Ratio Control
Internally linked gas and air valves (standard versions)
Combustion Air Supply
Integral combustion air blower or external blower (EB versions)

Combustion, Mixing & Fuel Dynamics

Combustion Principle
Nozzle‑mixing burner with patented mixing cone

Processing & Performance Metrics

Turndown Capability
Minimums dependent on fuel and configuration; Wide turndown
Maximum Capacity
Up to 5 MMBtu/h (standard) (60 Hz), Up to ~10.0 MMBtu/h (EBC‑6)

Thermal, Flow & Process Characteristics

Suction Capability
Up to -5 in WC

Installation & Mounting Specifications

Installation Type
Through oven wall or insulated air duct

Ignition, Flame & Supervision Specifications

Flame Supervision
UV Scanner required for oil firing; UV or flame rod for gas‑only versions
Ignition Type
Spark‑ignited gas pilot

Combustion, Fuel & Mixing Sub‑Systems

Pilot Operation
Interrupted pilot required

Control, Logic & System Behavior

Operating Modes
Fires into passing air streams

Electrical Specifications

Burner Variant
500‑G (gas only), 500‑SP (combination gas/oil)

Product Design & Configuration

Burner Series
Model 500
Burner Family
OVENPAK®

Product Overview & Classification

Construction
Heavy‑duty industrial construction with steel body and stainless components

Applications & Compatibility

Applications
Ovens, dryers, paint lines, paper and textile machines, food baking ovens, coffee roasters, grain dryers, fume incinerators

Overview

Burner Type
Direct‑fired industrial burner

Fuel, Gas & Media Specifications

Fuel Type
Gas - Natural Gas (standard), Propane supported; Liquid - #2 Fuel Oil (500‑SP only)
OVENPAK® 500 — manufacturer page values
ParameterPublished value / configuration
Combustion Chamber Pressure RangeUp to +1″ WC (standard); higher with EB versions
Oil Pressure Requirement~22 to 72 psig, size‑dependent
Compressed Air Requirement~60 to 70 psig, model‑dependent (Oil)
Air/Fuel Ratio ControlInternally linked gas and air valves (standard versions)
Combustion Air SupplyIntegral combustion air blower or external blower (EB versions)
Combustion PrincipleNozzle‑mixing burner with patented mixing cone
Turndown CapabilityMinimums dependent on fuel and configuration; Wide turndown
Maximum CapacityUp to 5 MMBtu/h (standard) (60 Hz), Up to ~10.0 MMBtu/h (EBC‑6)
Suction CapabilityUp to -5 in WC
Installation TypeThrough oven wall or insulated air duct
Flame SupervisionUV Scanner required for oil firing; UV or flame rod for gas‑only versions
Ignition TypeSpark‑ignited gas pilot
Pilot OperationInterrupted pilot required
Operating ModesFires into passing air streams
Burner Variant500‑G (gas only), 500‑SP (combination gas/oil)
Burner SeriesModel 500
Burner FamilyOVENPAK®
ConstructionHeavy‑duty industrial construction with steel body and stainless components
ApplicationsOvens, dryers, paint lines, paper and textile machines, food baking ovens, coffee roasters, grain dryers, fume incinerators
Burner TypeDirect‑fired industrial burner
Fuel TypeGas - Natural Gas (standard), Propane supported; Liquid - #2 Fuel Oil (500‑SP only)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
1034840515,EB3 ANSI BKPLT W/1.25"+Request quotation
1037651EBC-4SP OIL NZL ASYRequest quotation
1039510535,EB5 ANSI BKPLT W/2" INLT+Request quotation
1042827SPRK SHLDRequest quotation
1043517500 HI LO SW ACTRequest quotation
1043937EP WP HI LO POS TWO SW ASYRequest quotation
1043938EP WP HI LO POS TWO SW ASYRequest quotation
1043941EP WP HI LO POS FOUR SW ASYRequest quotation
1043942EP WP HI LO POS FOUR SW ASYRequest quotation
1049603MOD MAIN HSGRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/single-burners/ovenpak-500

Last source check: 2026-11-02

OVENPAK® 500 Series Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry