Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Single Burners

OPTIMA™ SLS

OPTIMA SLS provides a compact nozzle-mixed flame contained within its sleeve for dryers, kilns, ovens and process heaters.

OPTIMA SLS provides a compact nozzle-mixed flame contained within its sleeve for dryers, kilns, ovens and process heaters. SMARTFIRE ratio control supports factory presetting and combustion optimization, with an optional support gateway. Steel and high-temperature alloys form the burner, and natural gas, propane and butane are the directly listed fuels.

Features & Benefits

Excess Air for Optimal Emissions
43%
Minimum Combustion Air Pressure
0.5 in wc
Process Temperature Range
1000 deg F
Installation Orientation
Can be mounted in any orientation
Combustion Air Pressure
~32 in WC at full capacity (size‑independent)
Process Pressure Range
Up to 1.5 psig; contact MAXON for higher pressures
Combustion Principle
Nozzle‑mix burner with patented shear layer stabilization (SLS)
Control System Type
SMARTFIRE® or SMARTLINK® Intelligent Ratio Control
Flame Supervision
UV or IR Scanners (detect both pilot and main flame)
Flame Containment
Fully contained in discharge sleeve
Fuel Flexibility
Supports fuel blends and multiple gaseous fuels
CO/NOx Emissions
NOx: < 9-15 ppm at 3% O₂; CO: Near zero
Turndown Ratio
Up to 8:1
Pilot Capacity
125,000 to 250,000 Btu/h
Capacity Range
8 to 93.5 MMBtu/h (≈ 2.3 to 27.4 MW)
Burner Variant
SLS - Shear Layer Stabilized
Ignition Type
Interrupted pilot required; raw gas or pilot air depending on conditions
Burner Family
OPTIMA™
Burner Sizes
8, 10, 12, 14, 16, 19, 22 in
Burner Type
Ultra‑low emissions, low‑temperature gas burner
Fuel Type
Natural Gas, Propane, Butane
Material
Carbon‑Steel Housing; AISI 330 Stainless Steel Sleeve and Cone; AISI 304 Stainless Steel Fuel Nozzles
  • Factory presetting and intelligent ratio control simplify startup.

Applications

  • Spray, flash, fluidized-bed, print and paper dryers
  • Air heaters
  • Kilns
  • Process heaters
  • Ovens

Detailed capabilities

Contained flame and SLS combustion

OPTIMA SLS combines lean-premix stabilization with nozzle-mix flexibility to limit prompt-NOx formation while retaining a compact flame. The flame stays within the discharge sleeve, helping integrate the all-metal burner in dryers, ovens, kilns and other process heaters. Steel and high-temperature alloys address weight and durability, with natural gas, propane and butane named directly and other fuels requiring consultation.

Manufacturer reference ↗

SMARTFIRE coordination and support

Coupling OPTIMA SLS with SMARTFIRE permits factory presetting and continued ratio optimization as the process operates. The source links this to repeatable startup, fuel efficiency and emissions control. An optional communications gateway supports remote factory assistance. That gateway is an option for the described support arrangement rather than an inherent capability of every standalone burner package.

Manufacturer reference ↗

Features and benefits

  • Factory presetting and intelligent ratio control simplify startup.

Manufacturer reference ↗

Published application context

  • Spray, flash, fluidized-bed, print and paper dryers
  • Air heaters
  • Kilns
  • Process heaters
  • Ovens

Manufacturer reference ↗

Specifications

Air & Combustion Air Specifications

Excess Air for Optimal Emissions
43%

Pressure Specifications

Minimum Combustion Air Pressure
0.5 in wc
Combustion Air Pressure
~32 in WC at full capacity (size‑independent)
Process Pressure Range
Up to 1.5 psig; contact MAXON for higher pressures

Operating/Process Temperature Ranges

Process Temperature Range
1000 deg F

Installation & Mounting Specifications

Installation Orientation
Can be mounted in any orientation

Combustion, Mixing & Fuel Dynamics

Combustion Principle
Nozzle‑mix burner with patented shear layer stabilization (SLS)

Control, Logic & Functional Behavior

Control System Type
SMARTFIRE® or SMARTLINK® Intelligent Ratio Control

Ignition, Flame & Supervision Specifications

Flame Supervision
UV or IR Scanners (detect both pilot and main flame)
Flame Containment
Fully contained in discharge sleeve
Ignition Type
Interrupted pilot required; raw gas or pilot air depending on conditions

Fuel, Gas & Media Specifications

Fuel Flexibility
Supports fuel blends and multiple gaseous fuels
Fuel Type
Natural Gas, Propane, Butane

Processing & Performance Metrics

CO/NOx Emissions
NOx: < 9-15 ppm at 3% O₂; CO: Near zero
Capacity Range
8 to 93.5 MMBtu/h (≈ 2.3 to 27.4 MW)

Performance, Flow & Capacity

Turndown Ratio
Up to 8:1

Performance Specifications

Pilot Capacity
125,000 to 250,000 Btu/h

Electrical Specifications

Burner Variant
SLS - Shear Layer Stabilized

Product Design & Configuration

Burner Family
OPTIMA™

Dimensions & Size Specifications

Burner Sizes
8, 10, 12, 14, 16, 19, 22 in

Applications & Compatibility

Applications
Industrial dryers (paper, wood, gypsum, spray, flash, fluidized bed), air heaters, ovens, kilns, process heaters

Overview

Burner Type
Ultra‑low emissions, low‑temperature gas burner

Material Specifications

Material
Carbon‑Steel Housing; AISI 330 Stainless Steel Sleeve and Cone; AISI 304 Stainless Steel Fuel Nozzles
OPTIMA™ SLS — manufacturer page values
ParameterPublished value / configuration
Excess Air for Optimal Emissions43%
Minimum Combustion Air Pressure0.5 in wc
Combustion Air Pressure~32 in WC at full capacity (size‑independent)
Process Pressure RangeUp to 1.5 psig; contact MAXON for higher pressures
Process Temperature Range1000 deg F
Installation OrientationCan be mounted in any orientation
Combustion PrincipleNozzle‑mix burner with patented shear layer stabilization (SLS)
Control System TypeSMARTFIRE® or SMARTLINK® Intelligent Ratio Control
Flame SupervisionUV or IR Scanners (detect both pilot and main flame)
Flame ContainmentFully contained in discharge sleeve
Ignition TypeInterrupted pilot required; raw gas or pilot air depending on conditions
Fuel FlexibilitySupports fuel blends and multiple gaseous fuels
Fuel TypeNatural Gas, Propane, Butane
CO/NOx EmissionsNOx: < 9-15 ppm at 3% O₂; CO: Near zero
Capacity Range8 to 93.5 MMBtu/h (≈ 2.3 to 27.4 MW)
Turndown RatioUp to 8:1
Pilot Capacity125,000 to 250,000 Btu/h
Burner VariantSLS - Shear Layer Stabilized
Burner FamilyOPTIMA™
Burner Sizes8, 10, 12, 14, 16, 19, 22 in
ApplicationsIndustrial dryers (paper, wood, gypsum, spray, flash, fluidized bed), air heaters, ovens, kilns, process heaters
Burner TypeUltra‑low emissions, low‑temperature gas burner
MaterialCarbon‑Steel Housing; AISI 330 Stainless Steel Sleeve and Cone; AISI 304 Stainless Steel Fuel Nozzles

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
08OPTSLS8" OPTIMA SLS BurnerRequest quotation
107490112" BRNR HSGRequest quotation
107490412" FUEL NZLRequest quotation
107490712" INSL HSGRequest quotation
107490812" CONERequest quotation
107490912" DIS SLVRequest quotation
1074912BKPLT GSKTRequest quotation
1074913PILT GSKTRequest quotation
107618910" BRNR HSGRequest quotation
107619110" FUEL NZLRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/single-burners/optima-sls

Last source check: 2026-11-02

OPTIMA SLS Burner Product Image · Manufacturer ownership retained; republication licence not independently confirmed

SLS™ Technology Flame Image · Manufacturer ownership retained; republication licence not independently confirmed

SLS™ Technology Diagram · Manufacturer ownership retained; republication licence not independently confirmed

OPTIMA™ SLS Burner Product Animation · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry