Paper Recorders
DR4300 Circular Chart Recorder
DR4300 records process measurements on a ten-inch circular paper chart using one or two pens.
DR4300 records process measurements on a ten-inch circular paper chart using one or two pens. Published arrangements include versions with or without a digital display, with control and alarm functions available for suitable duties. It accepts signals for temperature, humidity, pressure or flow and targets batch processes such as ovens, chambers and industrial production equipment.
Models: DR4300
Features & Benefits
- Chart
- 10-inch circular
- Pens
- One or two
Applications
- Batch-process recording
- Ovens and environmental chambers
- Food and pharmaceutical equipment
Detailed capabilities
What Is It?
DR4300 is described as a 10-inch, one- or two-pen recorder using preprinted charts and fiber-tip pens, with display and nondisplay variants. The source gives different typical accuracy/calibration statements for those variants and offers PID/alarm capability. These DR4300 facts must remain separate from the later operating paragraph, which switches to generic Truline wording.
How Does It Work?
The product-specific introduction describes a preprinted-chart recorder, but the source's operating subsection describes Truline chart generation and hot-stylus alternatives. This apparent reuse is retained as a documentation conflict rather than asserting that every DR4300 prints its own chart. The same caution applies to generic display, keypad and front-protection statements until matched to the exact DR4300 configuration.
What Problems Does It Solve?
The stated DR4300 role is economical recording of one or two process variables in batch and industrial equipment. Temperature, humidity, pressure and flow sources can be represented according to the selected input. The recorder's own chart/pen and variant documentation should determine consumables and maintenance, avoiding an unsupported merger with the DR4500/Truline description.
Electrical Specifications
- Alarm Outputs
- Up to 2 SPDT Relays or Open Collector Outputs
- Transmitter Power
- 24 VDC, 100 mA Max
- Output Type
- Electromechanical Relay, Open Collector, 4 to 20 mA Current Output
- Input Impedance
- mA: 250 Ω, V: 200 kΩ, RTD: 13.3 kΩ, Others: 10 MΩ
Processing & Performance Metrics
- Sampling rate
- Every 0.33 sec
Environmental Conditions
- Relative Humidity
- 10 to 90% RH (derated above 40 deg C)
- Operating Temperature Range
- 15 to 55 deg C (max 50 deg C for UL listing)
Applications & Compatibility
- Mounting
- Panel, Surface, or 2 in Pipe
I/O Capabilities
- Inputs
- 1 (Single Pen) or 2 (Dual Pen); Thermocouples, RTDs, mA, mV, V
- Control Modes
- Manual, Automatic (local setpoint)
Mechanical & Physical Properties
- Chart Size
- 10.24 in (260 mm) Diameter, 4 in (100 mm) Calibrated Width
Standards & Certifications
- Approvals
- CE, UL, CSA
| Parameter | Published value / configuration |
|---|---|
| Alarm Outputs | Up to 2 SPDT Relays or Open Collector Outputs |
| Transmitter Power | 24 VDC, 100 mA Max |
| Output Type | Electromechanical Relay, Open Collector, 4 to 20 mA Current Output |
| Input Impedance | mA: 250 Ω, V: 200 kΩ, RTD: 13.3 kΩ, Others: 10 MΩ |
| Sampling rate | Every 0.33 sec |
| Relative Humidity | 10 to 90% RH (derated above 40 deg C) |
| Operating Temperature Range | 15 to 55 deg C (max 50 deg C for UL listing) |
| Mounting | Panel, Surface, or 2 in Pipe |
| Inputs | 1 (Single Pen) or 2 (Dual Pen); Thermocouples, RTDs, mA, mV, V |
| Control Modes | Manual, Automatic (local setpoint) |
| Chart Size | 10.24 in (260 mm) Diameter, 4 in (100 mm) Calibrated Width |
| Approvals | CE, UL, CSA |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 22996 | BALUN FERRITE BEAD AXIAL | Request quotation |
| 24001660-001 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-002 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-003 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-004 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-005 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-006 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-007 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-008 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
| 24001660-009 | 10 IN CIRCULAR CHART-STOCK | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
DR4300 Circular Chart Recorder Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
