1/4 DIN Controllers
UDC3500 DIN Controller
UDC3500 supports single- or dual-loop control in a quarter-DIN enclosure, with setpoint programming and onboard diagnostics.
UDC3500 supports single- or dual-loop control in a quarter-DIN enclosure, with setpoint programming and onboard diagnostics. The public page describes computer-based setup and wash-down use. The retained source note identifies a historical Russian-language specification, so its detailed translation, revision applicability and current availability remain matters for confirmation.
Models: UDC3500
Features & Benefits
- Outputs
- Up to 3 Analog Outputs (current 4 to 20/0 to 20mA), up to 5 Digital Outputs (Relay, SSR, Open Collector), Dual Relay, Three Relay Board
- Operator Interface
- Multi-Language Prompts, Dedicated Keys, Indicators For Alarms, Control Mode, Temperature Units, Setpoint Status, Relay Status, Program Status
- Math Functions
- Feedforward Summer, Multiplier, Weighted Average, Summer/Subtractor, Multiplier/Divider, Input High/Low Select, 8-Segment Characterizers, Polynomial Curve, Totalizer, Logic Gates
- Output Algorithms
- Time Proportional, Current Proportional, Position Proportional, Duplex (heat/cool), Three Position Step Control, Relay/Current Duplex
- Display
- Dual Display: Upper (4 Digits, 7 Characters), Lower (4 Digits, 8 Characters), Multi-Language Prompts
Applications
- Industrial temperature and process control
Detailed capabilities
What Is It?
UDC3500 is offered for one or two control loops in a quarter-DIN enclosure. The page states 0.10% accuracy, 166 ms scanning and washdown application. Pocket-PC or computer setup, enhanced setpoint programming and shared spares support configuration; the dual-loop choice is not a capability automatically supplied by every ordered controller.
How Does It Work?
Microprocessor-based regulation uses the selected single/dual-loop arrangement and programmed setpoints. Fast scanning and onboard diagnosis support operation and fault-finding. The source does not describe a separate physical measurement principle beyond the controller architecture, so configuration and input/output choices must follow the exact unit documentation rather than being inferred from the general family description.
What Problems Does It Solve?
The family provides a compact route to tailored process control while simplifying spare-parts and service requirements. Advanced programming can address more involved sequences without treating the controller as an unlimited PLC. Accuracy and scan figures remain those of UDC3500 rather than values borrowed from another UDC generation.
The selected UDC3500 specification is a Russian-language edition dated September 2005. Model identity is confirmed; detailed translation, revision applicability and current availability remain pending.
I/O Capabilities
- Analog Inputs
- Up to 3 Universal Analog Inputs (can be configured as 1 universal + 4 high level), 16-bit Resolution, ±0.1% Accuracy, 6 samples/sec
- Outputs
- Up to 3 Analog Outputs (current 4 to 20/0 to 20mA), up to 5 Digital Outputs (Relay, SSR, Open Collector), Dual Relay, Three Relay Board
- Operator Interface
- Multi-Language Prompts, Dedicated Keys, Indicators For Alarms, Control Mode, Temperature Units, Setpoint Status, Relay Status, Program Status
- Math Functions
- Feedforward Summer, Multiplier, Weighted Average, Summer/Subtractor, Multiplier/Divider, Input High/Low Select, 8-Segment Characterizers, Polynomial Curve, Totalizer, Logic Gates
- Digital Inputs
- 4 isolated digital inputs for remote control and configuration
- Control Algorithms
- On/Off, PID-A, PID-B, PD with Manual Reset, Three Position Step Control, Manual/Auto/Local/Remote Setpoint Modes
Memory & Storage
- Setpoint Programming
- Up to 10 ramp + 10 soak segments (standard), up to 4 programs with 20 ramp + 20 soak segments (enhanced), guaranteed soak deviation, setpoint rate, output rate limiter
Security & Access Control
- Security
- 5-Levels of Keyboard Security, 4-Digit Code, Non-Volatile EEPROM Memory
Electrical Specifications
- Power Supply
- Universal 90 to 264 VAC, 50/60 Hz, Optional 24 VAC/DC
- Output Algorithms
- Time Proportional, Current Proportional, Position Proportional, Duplex (heat/cool), Three Position Step Control, Relay/Current Duplex
Applications & Compatibility
- Mounting
- Panel-Mounted, 5.8 in (148 mm) depth, 1/4 DIN Cutout
Standards & Certifications
- Moisture Protection
- NEMA 4X and IP 66 Front Face, UL and CSA Approved as Type 4
- Approvals
- CE (Standard), UL, CSA (Optional)
Software & Interface
- Display
- Dual Display: Upper (4 Digits, 7 Characters), Lower (4 Digits, 8 Characters), Multi-Language Prompts
Controller Specifications
- Controller Type
- Universal Digital Controller, 1/4 DIN size
Others
- Environmental
- Ambient: 0 to 55 deg C (32 to 131 deg F) degree Celsius; RH: 5 to 90% (max up to 40 deg C) degree Celsius; Vibration/Shock Resistant degree Celsius
| Parameter | Published value / configuration |
|---|---|
| Analog Inputs | Up to 3 Universal Analog Inputs (can be configured as 1 universal + 4 high level), 16-bit Resolution, ±0.1% Accuracy, 6 samples/sec |
| Outputs | Up to 3 Analog Outputs (current 4 to 20/0 to 20mA), up to 5 Digital Outputs (Relay, SSR, Open Collector), Dual Relay, Three Relay Board |
| Operator Interface | Multi-Language Prompts, Dedicated Keys, Indicators For Alarms, Control Mode, Temperature Units, Setpoint Status, Relay Status, Program Status |
| Math Functions | Feedforward Summer, Multiplier, Weighted Average, Summer/Subtractor, Multiplier/Divider, Input High/Low Select, 8-Segment Characterizers, Polynomial Curve, Totalizer, Logic Gates |
| Digital Inputs | 4 isolated digital inputs for remote control and configuration |
| Control Algorithms | On/Off, PID-A, PID-B, PD with Manual Reset, Three Position Step Control, Manual/Auto/Local/Remote Setpoint Modes |
| Setpoint Programming | Up to 10 ramp + 10 soak segments (standard), up to 4 programs with 20 ramp + 20 soak segments (enhanced), guaranteed soak deviation, setpoint rate, output rate limiter |
| Security | 5-Levels of Keyboard Security, 4-Digit Code, Non-Volatile EEPROM Memory |
| Power Supply | Universal 90 to 264 VAC, 50/60 Hz, Optional 24 VAC/DC |
| Output Algorithms | Time Proportional, Current Proportional, Position Proportional, Duplex (heat/cool), Three Position Step Control, Relay/Current Duplex |
| Mounting | Panel-Mounted, 5.8 in (148 mm) depth, 1/4 DIN Cutout |
| Moisture Protection | NEMA 4X and IP 66 Front Face, UL and CSA Approved as Type 4 |
| Approvals | CE (Standard), UL, CSA (Optional) |
| Display | Dual Display: Upper (4 Digits, 7 Characters), Lower (4 Digits, 8 Characters), Multi-Language Prompts |
| Controller Type | Universal Digital Controller, 1/4 DIN size |
| Environmental | Ambient: 0 to 55 deg C (32 to 131 deg F) degree Celsius; RH: 5 to 90% (max up to 40 deg C) degree Celsius; Vibration/Shock Resistant degree Celsius |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 1233 | 1/2(L059:065/059:049) | Request quotation |
| 30732481-501 | MOV.NOISE SUP 120V U30A | Request quotation |
| 30732481-502 | MOV.NOISE SUP 275V U30A | Request quotation |
| 30755498-001 | 4-20MA RESISTOR KIT UDC6000 | Request quotation |
| 30755851-501 | UDC5000 LOW LVL INPUT PCB ASSY | Request quotation |
| 30756683-501 | GASKET PANEL/CASE FLANGE | Request quotation |
| 30756687-501 | PWA AUX OUTPUT SPARE U30A | Request quotation |
| 30756687-502 | PWA AUX OUTPUT SPARE UDC3300 | Request quotation |
| 30756687-601 | PWA AUX 3 PC DISTRIB. KIT | Request quotation |
| 30756690-502 | DMCS COMM SPARE KIT UDC3300 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
UDC3500 DIN Controller Image · Manufacturer ownership retained; republication licence not independently confirmed
UDC3500 DIN Controller Image 1 · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
