Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

1/32 DIN Controllers

UDC700 DIN Controller

UDC700 provides universal process control in a one-thirty-second-DIN package with a shallow case.

UDC700 provides universal process control in a one-thirty-second-DIN package with a shallow case. Automatic tuning and a four-digit LED display support configuration and operation, and an indicator-only arrangement is also published. The compact instrument targets less complex control duties, including thermal equipment and packaging machinery where panel space and straightforward operation are priorities.

Models: UDC700

Features & Benefits

Format
1/32 DIN
Panel cutout
45 × 22 mm
  • Saves panel space

Applications

  • Ovens and kilns
  • Plastic machinery
  • Dryers
  • Packaging

Specifications

Functional & Control Features

Tuning
Automatic PID tuning or manual tuning with “pretune”
Setpoints
One or two local setpoints selectable from keypad

Environmental Conditions

Environmental Protection
NEMA 4/IP66 Front-Face Sealing, EMI/EMC Compliant
Temperature Stability
0.01% of span per deg C

Processing & Performance Metrics

Input Sampling Rate
4 samples/sec
Accuracy
0.1% of span ±1 LSD (0.25% for Types J and T)

I/O Capabilities

Control Algorithms
Direct or Reverse Acting; ON/OFF Hysteresis 0.1 to 10% of input span; PID or ON/OFF
Configuration
Front panel menu or configuration port; No hardware config needed
Outputs
Electromechanical Relay (2A, SPST), SSR Driver (10 VDC into 500 ohms min, 50 mA max)

Electrical Specifications

Input Resolution
14 bit (always 4X better than display resolution)
Input Isolation
2500 V from outputs and power supply (except SSR driver)
Power Supply
Universal: 90 to 264 VAC, 50/60 Hz; Optional: 24 VAC or 12 to 30 VDC
Input Type
Universal Input: Thermocouples (B, J, K, N, R, S, T), RTDs (Pt100, 3-wire), DC Linear (mA, mV, V) voltage direct current

Controller Specifications

Controller Type
Universal Digital Controller and Indicator, 1/32 DIN (49 x 25 mm)

Communication & Protocols

Communication
Optional RS485 Modbus (half duplex, 1200-9600 baud, 32 drops max; mutually exclusive with Alarm 2)

Standards & Certifications

Approvals
UL, CE Mark

Software & Interface

Display
Large 10 mm (0.4 in) Four-Digit Red LED Display

Others

Dimensions
1.93 x 0.98 x 3.94 in; 49 x 25 x 100 mm
UDC700 DIN Controller — manufacturer page values
ParameterPublished value / configuration
TuningAutomatic PID tuning or manual tuning with “pretune”
SetpointsOne or two local setpoints selectable from keypad
Environmental ProtectionNEMA 4/IP66 Front-Face Sealing, EMI/EMC Compliant
Temperature Stability0.01% of span per deg C
Input Sampling Rate4 samples/sec
Accuracy0.1% of span ±1 LSD (0.25% for Types J and T)
Control AlgorithmsDirect or Reverse Acting; ON/OFF Hysteresis 0.1 to 10% of input span; PID or ON/OFF
ConfigurationFront panel menu or configuration port; No hardware config needed
OutputsElectromechanical Relay (2A, SPST), SSR Driver (10 VDC into 500 ohms min, 50 mA max)
Input Resolution14 bit (always 4X better than display resolution)
Input Isolation2500 V from outputs and power supply (except SSR driver)
Power SupplyUniversal: 90 to 264 VAC, 50/60 Hz; Optional: 24 VAC or 12 to 30 VDC
Input TypeUniversal Input: Thermocouples (B, J, K, N, R, S, T), RTDs (Pt100, 3-wire), DC Linear (mA, mV, V) voltage direct current
Controller TypeUniversal Digital Controller and Indicator, 1/32 DIN (49 x 25 mm)
CommunicationOptional RS485 Modbus (half duplex, 1200-9600 baud, 32 drops max; mutually exclusive with Alarm 2)
ApprovalsUL, CE Mark
DisplayLarge 10 mm (0.4 in) Four-Digit Red LED Display
Dimensions1.93 x 0.98 x 3.94 in; 49 x 25 x 100 mm

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

7 parts

Part NumberDescriptionEnquiry
DC701UDC700 UNIVERSAL DIGITAL CONTROLLERRequest quotation
DC701-000001DC701-1-0-0-0-0-0Request quotation
DC702UDC700 UNIVERSAL DIGITAL CONTROLLERRequest quotation
DC703UDC700 UNIVERSAL DIGITAL CONTROLLERRequest quotation
DC70A0000UNIVERSAL DIGITAL CONTROLLERRequest quotation
DC70E0000UNIVERSAL DIGITAL CONTROLLERRequest quotation
DC70I0000UNIVERSAL DIGITAL CONTROLLERRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/process-instruments/controllers-and-programmers/1-32-din-controllers/udc700-din-controller

Last source check: 2026-11-02

UDC700 DIN Controller Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry