Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Thermal Conductivity

7866 Thermal Conductivity Analyzer

7866 determines gas concentration from thermal conductivity, using a sensing unit, receiver and power supply.

7866 determines gas concentration from thermal conductivity, using a sensing unit, receiver and power supply. Single-range versions address binary or selected multicomponent mixtures; the triple-range arrangement supports hydrogen-cooled generator monitoring, including purge-gas measurements. Continuous sample flow through the sensing system supplies concentration information for power and other industrial gas-analysis applications.

Features & Benefits

Versions
Single range and triple range
  • Supports continuous gas-concentration measurement

Applications

  • Hydrogen-cooled generators
  • Industrial binary-gas analysis

Detailed capabilities

What Is It?

7866 analyzes a binary gas mixture or a calibrated constituent in a multicomponent mixture using thermal conductivity. Single-range and triple-range versions serve different duties. Triple-range use includes hydrogen purity in cooled generators and the stated CO2/air/hydrogen power-plant measurements; the single-range form supports other selected gas-analysis tasks.

Manufacturer reference ↗

How Does It Work?

A continuously flowing sample enters the sensing unit. Its electrical output reaches a separate receiver over the interconnecting cable, and the receiver provides current output for remote observation or recording. Sensing unit, control unit and power supply form the system. Calibration for a multicomponent mixture is explicitly required rather than every unknown mixture being resolved automatically.

Manufacturer reference ↗

What Problems Does It Solve?

Gas concentration information supports safe, efficient operation where incorrect composition can impair productivity or create hazardous conditions. The source links sensitivity, stability and response to its solid-state design. This is process-analysis information; the page does not establish a standalone certified explosion-prevention system or universal identification of every gas component.

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Accuracy
±2% of span (output signal) at reference conditions
Sample Flow Rate Influence
<±0.5% of span (0.2 to 4 cfh/100 to 2000 cc/min)
Maximum Drift
Zero/Span: ±2% of span per week

Environmental Conditions

Atmospheric Pressure Influence
±0.01% of span per inch H₂O (±0.05% per mm Hg)
Ambient Temperature Influence
Sensing Unit: <1% Full Scale Over Range, Control Unit: ±0.01% per deg C
Analyzer Type
Single Range or Triple Range (CO₂ in Air, H₂ in CO₂, H₂ in Air)

Electrical Specifications

Ambient Requirements
RH: 90% max, Temperature: -10 to +50 deg C, Storage Temperature: 70 deg C max
Sample Requirements
Temp: -10 to +50 deg C (14 to 122 deg F), Flow: 0.2 to 4.2 cfh (100 to 2000 cc/min), Pressure: 37 mm Hg min
Power Requirements
Control Unit: 90 to 264 VAC (18 VA max) or 24 VAC/DC (12 VA max)
Output Signal
0 to 20 mA or 4 to 20 mA (max load 800 Ω)

Measurement & Sensor Related (Measurement Capabilities)

Reproducibility
±1% of span (24 hour)
Repeatability
±0.3% of span (short term)
Linearity
±2% of span for most standard ranges

Technical Specifications

Connection Type
1/4 in OD Tubing (Sample/Reference), 1/2 in Conduit (Power)

I/O Capabilities

Response Time
CO₂: <2s initial, 24s (63%), 45s (90%), 80s (99%) millisecond; H₂: <1s initial, 13s (63%), 23s (90%), 40s (99%) millisecond

Applications & Compatibility

Applications
Hydrogen purity in generators, hydrogen in ammonia/nitrogen, hydrogen in hydrocarbons

Standards & Certifications

Approvals
FM/CSA Class I, II, III Div 1 (Triple Range std, Single Range opt), CE, IP65 Panel Front
7866 Thermal Conductivity Analyzer — manufacturer page values
ParameterPublished value / configuration
Accuracy±2% of span (output signal) at reference conditions
Sample Flow Rate Influence<±0.5% of span (0.2 to 4 cfh/100 to 2000 cc/min)
Maximum DriftZero/Span: ±2% of span per week
Atmospheric Pressure Influence±0.01% of span per inch H₂O (±0.05% per mm Hg)
Ambient Temperature InfluenceSensing Unit: <1% Full Scale Over Range, Control Unit: ±0.01% per deg C
Analyzer TypeSingle Range or Triple Range (CO₂ in Air, H₂ in CO₂, H₂ in Air)
Ambient RequirementsRH: 90% max, Temperature: -10 to +50 deg C, Storage Temperature: 70 deg C max
Sample RequirementsTemp: -10 to +50 deg C (14 to 122 deg F), Flow: 0.2 to 4.2 cfh (100 to 2000 cc/min), Pressure: 37 mm Hg min
Power RequirementsControl Unit: 90 to 264 VAC (18 VA max) or 24 VAC/DC (12 VA max)
Output Signal0 to 20 mA or 4 to 20 mA (max load 800 Ω)
Reproducibility±1% of span (24 hour)
Repeatability±0.3% of span (short term)
Linearity±2% of span for most standard ranges
Connection Type1/4 in OD Tubing (Sample/Reference), 1/2 in Conduit (Power)
Response TimeCO₂: <2s initial, 24s (63%), 45s (90%), 80s (99%) millisecond; H₂: <1s initial, 13s (63%), 23s (90%), 40s (99%) millisecond
ApplicationsHydrogen purity in generators, hydrogen in ammonia/nitrogen, hydrogen in hydrocarbons
ApprovalsFM/CSA Class I, II, III Div 1 (Triple Range std, Single Range opt), CE, IP65 Panel Front

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
056173PCB HTR/RELAY BDRequest quotation
07866D02DIGITAL THRML COND. GAS ANALYZERRequest quotation
07866DC2REPL. DIGITAL CONTROL UNIT ONLYRequest quotation
07866DHC2REPL DIGITAL CNTRL UNIT HYDROGENRequest quotation
07866DHH2DIGITAL THERMAL COND. ANALYZERRequest quotation
07866HHSSREPLACEMENT SENSOR ASSY.Request quotation
07866SS2REPL. SENSOR ASSEMBLY 2 PORTRequest quotation
07866SS4REPL. SENSOR ASSEMBLY 4 PORTRequest quotation
144914PC BOARDRequest quotation
31072925GAUGE HYDROGENRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/process-instruments/analytical-instruments-and-sensors/thermal-conductivity/7866-thermal-conductivity-analyzer

Last source check: 2026-11-02

7866 Thermal Conductivity Analyzer IMAGE · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry