Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Relief Valves

HON 832

HON 832 is a direct-acting Type-B safety relief valve for leakage relief in gas pressure systems.

HON 832 is a direct-acting Type-B safety relief valve for leakage relief in gas pressure systems. Its compact arrangement permits installation in any position, and the manufacturer identifies accurate response within its stated setting range. The selected valve helps prevent small regulator leakage from unnecessarily triggering a safety shut-off device.

Models: HON 832

Features & Benefits

Maximum admissible pressure
100 bar
Response range
0.5–30 bar
Seat diameter
8 mm
  • Any-position installation

Applications

  • Leakage relief at gas regulators

Specifications

Processing & Performance Metrics

Maximum Permissible Pressure
100 bar
Flow Rate Coefficient (KG)
32 m³/h·bar

Environmental Conditions

Maximum Operating Pressure
100 bar kilopascal
Response Pressure Range
Wd: 0.5 to 30 bar
Temperature Range
-20 to +60 deg C

Standards & Certifications

Explosion Protection
They are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfill the ATEX requirements
Approvals
DIN 3381, SEP according to PED

Mechanical & Physical Properties

Valve Seat Diameter
8 mm

Technical Specifications

Connection Type
Inlet: 12 mm; Outlet: 16, 20, 25, 28 mm; Pipe Connections DIN EN ISO 8434-1 (DIN 2353), PN 100

Material Specifications

Body Material
Aluminum Alloy

Applications & Compatibility

Applications
Leak gas SRV (type “B”, DIN 33821) with internal vent connection; Municipal and industrial gas systems; Proportional SRV (type “A”, DIN 33821) with autonomous vent connection
HON 832 — manufacturer page values
ParameterPublished value / configuration
Maximum Permissible Pressure100 bar
Flow Rate Coefficient (KG)32 m³/h·bar
Maximum Operating Pressure100 bar kilopascal
Response Pressure RangeWd: 0.5 to 30 bar
Temperature Range-20 to +60 deg C
Explosion ProtectionThey are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfill the ATEX requirements
ApprovalsDIN 3381, SEP according to PED
Valve Seat Diameter8 mm
Connection TypeInlet: 12 mm; Outlet: 16, 20, 25, 28 mm; Pipe Connections DIN EN ISO 8434-1 (DIN 2353), PN 100
Body MaterialAluminum Alloy
ApplicationsLeak gas SRV (type “B”, DIN 33821) with internal vent connection; Municipal and industrial gas systems; Proportional SRV (type “A”, DIN 33821) with autonomous vent connection

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType
HON 832 ↗2026-11-02PDF

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON832Safety Relief Valve HON 832Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-relief-valves/hon-832

Last source check: 2026-11-02

HON 832 image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry