Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

High Pressure Regulators up to PN40 (ANSI 300)

HON 402

HON 402 is a pilot-operated regulator for gas offtake applications with a broad inlet-pressure range.

HON 402 is a pilot-operated regulator for gas offtake applications with a broad inlet-pressure range. It can use an inline or external pilot and is available with safety shut-off protection. A reduced component count aids servicing, while noise reduction can be added to existing equipment and outlet arrangements vary by size.

Models: HON 402

Features & Benefits

Maximum admissible pressure
50 bar
Outlet range
20 mbar–40 bar
Noise treatment
Retrofit option
  • Reduced parts count simplifies maintenance

Applications

  • Gas network offtake stations

Detailed capabilities

HON 402 — operating design

HON 402 is a pilot-operated regulator for gas offtake applications with a broad inlet-pressure range. It can use an inline or external pilot and is available with safety shut-off protection. A reduced component count aids servicing, while noise reduction can be added to existing equipment and outlet arrangements vary by size.

Manufacturer reference ↗

Pilot arrangements and station protection

HON 402 can use an inline HON 620 or external HON 630-family pilot. A single-stage alternative is identified for limited inlet variation. Shut-off actuator options change with pipe size and pressure class, while outlet geometry differs between the small equal-bore and larger expanded-outlet versions. Noise treatment can be retrofitted, and the source gives separate regulation and shut-off setting ranges.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 402. Version, size and option qualifications remain attached to each fact.

  • Maximum Permissible Pressure: 25 bar (Integral Overpressure Protection with HON 625); 40 bar (with HON 630/630-1)
  • Minimum Pressure Drop: Δp ≥ 0.5 bar
  • Operating Temperature Range: -20 to +60 deg C
  • Lock-up Pressure Zone Class: SZ 2.5
  • Explosion Protection: No ignition sources/hot faces, not subject to ATEX 95. Electronic accessories meet ATEX
  • Connection Type: ANSI 150, ANSI 300 (body: ductile iron GJS or cast steel GS); DIN Flange PN 16, PN 25, PN 40

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Maximum Permissible Pressure
25 bar (Integral Overpressure Protection with HON 625); 40 bar (with HON 630/630-1)
Minimum Pressure Drop
Δp ≥ 0.5 bar

Environmental Conditions

Operating Temperature Range
-20 to +60 deg C

Mechanical & Physical Properties

Lock-up Pressure Zone Class
SZ 2.5

Standards & Certifications

Explosion Protection
No ignition sources/hot faces, not subject to ATEX 95. Electronic accessories meet ATEX

Technical Specifications

Connection Type
ANSI 150, ANSI 300 (body: ductile iron GJS or cast steel GS); DIN Flange PN 16, PN 25, PN 40

Material Specifications

Body Material
Ductile Iron GJS/Cast Steel GS

Applications & Compatibility

Applications
Municipal consumers, power plants, industrial stations; Suitable for gases per DVGW G 260 and neutral, non-aggressive gases (others on request)
HON 402 — manufacturer page values
ParameterPublished value / configuration
Maximum Permissible Pressure25 bar (Integral Overpressure Protection with HON 625); 40 bar (with HON 630/630-1)
Minimum Pressure DropΔp ≥ 0.5 bar
Operating Temperature Range-20 to +60 deg C
Lock-up Pressure Zone ClassSZ 2.5
Explosion ProtectionNo ignition sources/hot faces, not subject to ATEX 95. Electronic accessories meet ATEX
Connection TypeANSI 150, ANSI 300 (body: ductile iron GJS or cast steel GS); DIN Flange PN 16, PN 25, PN 40
Body MaterialDuctile Iron GJS/Cast Steel GS
ApplicationsMunicipal consumers, power plants, industrial stations; Suitable for gases per DVGW G 260 and neutral, non-aggressive gases (others on request)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON402Gas Pressure Regulator HON 402Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/high-pressure-regulators-up-to-pn40-ansi-300/hon-402

Last source check: 2026-11-02

HON 402 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry