SmartLine ST700 Pressure Transmitters
Remote Diaphragm Transmitters - SmartLine STR700
STR700 transmitters use remote diaphragm seals to measure pressure where corrosive media or elevated process temperature makes direct instrument contact unsuitable.
STR700 transmitters use remote diaphragm seals to measure pressure where corrosive media or elevated process temperature makes direct instrument contact unsuitable. Honeywell offers multiple seal arrangements, capillary constructions and process connections. Published STR73D/STR735D and STR74G/STR745G variants cover different differential or gauge duties, so seal and transmitter selection must reflect the installation.
Models: STR735D, STR745G
Features & Benefits
- Seal choices
- Flanged, sanitary, threaded, pancake and other published designs
Applications
- Corrosive fluids
- High-temperature process fluids
Product videos
Overview
- Models
- STR735D, STR745G
Environmental Conditions
- Maximum Allowable Working Pressure (MAWP)
- STR735D: 750 psig (51.7 bar); STR745G: 500 psig (35 bar); limited by body or seal rating
- Ambient Temperature Limits
- -55 to +90 deg C (Storage); LCD display: -20 to +70 deg C (Operation)
- Relative Humidity
- 0 to 100% RH
- Measurement Type
- Differential Pressure (DP) and Gauge Pressure (GP) with Remote Diaphragm Seals
- Rangeability
- Up to 100:1 (STR735D: 111:1)
- Stability
- Not explicitly stated, but optimized for minimal temperature effects
Processing & Performance Metrics
- Maximum Turndown Ratio
- STR735D: 111:1; STR745G: 100:1
- Accuracy
- Up to 0.075% of span (standard), 0.040% (optional for STR745G)
Communication & Protocols
- Output/Communications
- 4 to 20 mA, HART (v7.0)
Functional & Control Features
- Sensor Technology
- Piezoresistive sensor with static pressure & temperature compensation
- Diagnostics
- Comprehensive on-board diagnostics, critical/non-critical, SIL 2/3 certified
Standards & Certifications
- Safety Approvals
- SIL 2/3 Certified, Dual Seal Design, NAMUR NE-43 Compliance, World Class Overpressure Protection
- Approvals
- FM, CSA, ATEX, IECEx, NEPSI, KOSHA, EAC, CCoE, UATR, SAEx, INMETRO, IEC 61508 SIL 2/3
Technical Specifications
- STR73D/ STR735D
- -100 to 100 psig (-7 to 7 bar) | 1 to 100 psig (0.07 to 7 bar)
- STR74G/ STR745G
- -500 to 500 psig (-35 to 35 bar) | 5 to 500 psig (0.035 to 35 bar)
Electrical Specifications
- Supply Voltage
- 10.8 to 42.4 VDC (IS versions limited to 30 VDC), 0 to 1,440 ohms load resistance
- Pressure Range
- STR735D: 100 psid (-100 to +100 psid, min span 0.9 psid); STR745G: 500 psig (-14.7 to +500 psig, min span 5 psig)
I/O Capabilities
- Response Time
- Not explicitly stated, but similar SmartLine transmitters are as fast as 100 ms millisecond
- Configuration
- External Zero, Span & Configuration Capability; Three-Button Local Configuration
| Parameter | Published value / configuration |
|---|---|
| Models | STR735D, STR745G |
| Maximum Allowable Working Pressure (MAWP) | STR735D: 750 psig (51.7 bar); STR745G: 500 psig (35 bar); limited by body or seal rating |
| Ambient Temperature Limits | -55 to +90 deg C (Storage); LCD display: -20 to +70 deg C (Operation) |
| Relative Humidity | 0 to 100% RH |
| Measurement Type | Differential Pressure (DP) and Gauge Pressure (GP) with Remote Diaphragm Seals |
| Rangeability | Up to 100:1 (STR735D: 111:1) |
| Stability | Not explicitly stated, but optimized for minimal temperature effects |
| Maximum Turndown Ratio | STR735D: 111:1; STR745G: 100:1 |
| Accuracy | Up to 0.075% of span (standard), 0.040% (optional for STR745G) |
| Output/Communications | 4 to 20 mA, HART (v7.0) |
| Sensor Technology | Piezoresistive sensor with static pressure & temperature compensation |
| Diagnostics | Comprehensive on-board diagnostics, critical/non-critical, SIL 2/3 certified |
| Safety Approvals | SIL 2/3 Certified, Dual Seal Design, NAMUR NE-43 Compliance, World Class Overpressure Protection |
| Approvals | FM, CSA, ATEX, IECEx, NEPSI, KOSHA, EAC, CCoE, UATR, SAEx, INMETRO, IEC 61508 SIL 2/3 |
| Display Options | Modular LCD (Alphanumeric), Multiple screens, Configurable units, Multiple languages (EN, RU) |
| Supply Voltage | 10.8 to 42.4 VDC (IS versions limited to 30 VDC), 0 to 1,440 ohms load resistance |
| Pressure Range | STR735D: 100 psid (-100 to +100 psid, min span 0.9 psid); STR745G: 500 psig (-14.7 to +500 psig, min span 5 psig) |
| Response Time | Not explicitly stated, but similar SmartLine transmitters are as fast as 100 ms millisecond |
| Configuration | External Zero, Span & Configuration Capability; Three-Button Local Configuration |
| STR73D/ STR735D | -100 to 100 psig (-7 to 7 bar) | 1 to 100 psig (0.07 to 7 bar) |
| STR74G/ STR745G | -500 to 500 psig (-35 to 35 bar) | 5 to 500 psig (0.035 to 35 bar) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 30352520-508 | TEFLON PIPE PLUG KIT | Request quotation |
| 30369468-501 | VENT PLUG KIT LOW DISPLACEMNT | Request quotation |
| 30369468-502 | MONEL VENT PLUG KIT | Request quotation |
| 30369468-503 | VENT PLUG KIT HASTELLOY | Request quotation |
| 30369468C001 | VENT PLUG W/CERTIFIC W/ 316 S/S | Request quotation |
| 30369468C003 | VENT/PLUG(HASTELLOY) W/CERT | Request quotation |
| 30679622-501 | REPL GASKET KIT CL41 | Request quotation |
| 30756445-508 | KIT GASKET PULP & PAPER ORING | Request quotation |
| 50003041-502 | CFF REMOTE SEAL KIT | Request quotation |
| 50049832-501 | ST700/800 ALUM CAP W/WINDOW | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
STR700-700LE with standard display.png · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
